Design Wireless Network 2 Chapter 8 Wireless LAN Network Setup

Design Wireless Network 2 Ad-hoc Networking

Design Wireless Network 2 Use Cases

Design Wireless Network 2 Possibilities Telephones (cellular, cordless, other) Cordless multimedia (headsets, speakers, mic.) Portable computers (Laptops, desktop, other) Cordless computer peripherals (keyboard, mouse) LAN – Local Area Network peripherals (printer, fax) PDAs - Personal Digital Assistants (palm top/pilot) Digital cameras

Design Wireless Network 2 Ad-…what? Ad-hoc network… …a LAN or other small network, …with wireless connections …devices are part of the network only for the duration of a communications session Or …while in close proximity to the network

Design Wireless Network 2 LAB 3 Windows 8 Adhoc Wireless LAN

Design Wireless Network 2 Step 1: Launch an elevated command prompt under Windows 8 (one with administrator privileges). Step 2: Run the following command to verify that your network interface supports virtualization: netsh wlan show drivers If Hosted network supported says Yes, you’re all set. Otherwise, you need to upgrade your hardware, if the software update doesn’t fix it.

Design Wireless Network 2 Step3: Now, set up the ad hoc wireless network using this command. Replace the parts in markup tags with your own choices netsh wlan set hostednetwork mode=allow ssid=<enter_network_name_here> key=<enter_password_here> 3 channel Plan at 2.4 GHz

Design Wireless Network 2 Step 4: Until now, your hosted network has been created. Now, you need to start it. Use the command below: netsh wlan start hostednetwork 3 channel Plan at 2.4 GHz

Design Wireless Network 2 Step 5: You’re all set, with just one thing remaining. If it’s not already enabled, you need to allow Internet Connection Sharing (ICS) for your currently-active internet connection. Simply head over to Network & Sharing Center, and in the properties for the current internet connection, enable ICS. Make sure to select the ad hoc connection under Home networking connection. 3 channel Plan at 2.4 GHz

Design Wireless Network 2 Infrastructure Networking 3 channel Plan at 2.4 GHz

Design Wireless Network 2 LAB 4 Config Access Point TP-Link TL-WA 601G Basic Setting Network – LAN Wireless - Basic Setting - SSID - Region - Channel - Mode - Wireless Mode - Disable Wireless - Access Point -Enable SSID Broadcast - Client - Enable WDS - SSID - MAC of AP Basic Setting

Design Wireless Network 2 LAB 4-2 Config Access Point TP-Link TL-WA 601G Basic Setting - Wireless Mode - Repeater - MAC of AP - Universal Repeater - Bridge (Point to Point) - With AP Mode - Bridge (Point to Multi Point) - MAC of AP (1-6) 3 channel Plan at 2.4 GHz AP Mode

Design Wireless Network 2 LAB 4-3 Config Access Point TP-Link TL-WA 601G Basic Setting - Security Setting - Disable Security - WEP - Type - WEP Key Format - Hexadecimal - ASCII - Key Selected , WEP Key , Key Type - MAC of AP - WPA/WPA2 - Version - Encryption 3 channel Plan at 2.4 GHz Security

Design Wireless Network 2 LAB 4-4 Config Access Point TP-Link TL-WA 601G Basic Setting - Security Setting - WPA/WPA2 - Radius Server IP - Radius Port - Radius Password - Group Key Update Period - WPA-PSK/WPA2-PSK - Version - Encryption - PSK Passphrase 3 channel Plan at 2.4 GHz Security

Design Wireless Network 2 LAB 4-5 Config Access Point TP-Link TL-WA 601G Basic Setting - MAC Filtering - Enable / Disable - Allow - Deny ID MAC Address Status Privilege - Wireless Statistics Security

Design Wireless Network 2 LAB 4-6 Config Access Point TP-Link TL-WA 601G Advance Setting - DHCP - DHCP Setting - DHCP Server Enable/Disable - Start IP Address - End IP Address - Address Lease Time - Default Gateway - Default Domain - Primary DNS - Secondary DNS 3 channel Plan at 2.4 GHz Advance Setting

Design Wireless Network 2 LAB 4-7 Config Access Point TP-Link TL-WA 601G Advance Setting - DHCP - DHCP Client List - Address Reservation ID MAC Address Reserved IP Address Status Modify - Wireless Setting - Enable AP Isolation - Disable short preamble - RTS Threshold - Fragmentation Threshold - Beacon Interval - Power 3 channel Plan at 2.4 GHz Advance Setting

Design Wireless Network 2 LAB 4-8 Config Access Point TP-Link TL-WA 601G Maintenance - System Tool - Firmware - Factory Default - Backup & Restore - Reboot - Password - syslog 3 channel Plan at 2.4 GHz Maintenance

Design Wireless Network 2