1 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall James A. Senn’s Information Technology, 3 rd Edition Chapter 4 The Central Processor and Memory

2 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Objectives Describe the components and purpose of the central processing unit (CPU). Distinguish between primary storage (also called memory) and secondary storage (also called storage), and between RAM and ROM. Describe the chips and boards that can be used to augment the CPU and main memory.

3 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Objectives (Continued) Explain the process by which computers use registers to process data. List and explain the four determinants of processor speed. Describe eight ways of increasing processing and computer speed.

4 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Central Processing Unit (CPU) Definition Central Processing Unit (CPU) or Processor: The computer hardware that executes program instructions and performs the computer’s processing actions. Integrated Circuits/Chip/Microchip: A collection of thousands or millions of transistors placed on a small silicon chip.

5 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Central Processing Unit (CPU) Definition (Continued) Transistor: An electrical switch that can be in one of two states: open or closed. Integrating: The process of packing more transistors onto a single chip.

6 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Central Processing Unit (CPU) Definition (Continued)

7 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Central Processing Unit (CPU) Control Unit Control Unit: The part of the CPU that oversees and controls all computer activities according to the instructions it receives. Instructions: Detailed descriptions of the actions to be carried out during input, processing, output, storage, and transmission.

8 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Central Processing Unit (CPU) Arithmetic/Logic Unit (ALU) Arithmetic/Logic Unit (ALU): The part of the CPU that performs arithmetic and logical operations. –Arithmetic Operations: Addition, Subtraction, Multiplication, and Division. –Logical Operations: Greater Than (>), Less Than (<), Equal To (=)

9 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory Definition Primary Storage/Primary Memory/Main Memory/Internal Memory: Storage within the computer itself. Primary memory holds data only temporarily, as the computer executes instructions.

10 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory Definition (Continued)

11 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory Memory Size Byte: A storage location in memory; the amount of memory required to store one digit, letter, or character. Kilobyte/K-byte/KB/K: One thousand bytes. Megabyte/M-byte/MB/Meg: One million bytes. Gigabyte/G-byte/GB/Gig: One billion bytes.

12 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory Memory Size (Continued) Terabyte/T-byte/TB: One trillion bytes. Address: An identifiable location in memory where data are kept.

13 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory RAM and ROM Random-access Memory (RAM): Memory that permits data or information to be written into or read from memory only as long as the computer is turned on. Read-only Memory (ROM): A type of storage that offers random access to memory and can hold data and information after the electric current to the computer has been turned off.

14 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory Flash Memory Flash Memory: Memory that retains it contents even when electricity is turned off.

15 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory RAM, ROM and Flash Memory

16 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory PCMCIA Card Memory PCMCIA Card/PC card: A card designed to expand a computer’s memory.

17 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Memory Definition Boot: To turn on the computer system and let the built-in self-test run. Cold Boot: The system is turned on and started from an off state. The CPU invokes the ROM BIOS boot program, which in turn, runs the power-up self-tests and loads the operating system from disk storage. Warm Boot: In a restart, the BIOS knows the system is already running (data is written in a specific memory location checked by the BIOS) and skips the power-on test.

18 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Definition Board: A hardware device onto which chips and their related circuitry are placed. System Unit: The hardware unit that houses a computer’s processor, memory chips, ports, and add-in boards.

19 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Processor Chips Microprocessor: The smallest type of processor, with all of the processing capabilities of the control unit and ALU located on a single chip.

20 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Evolution of Intel Pentium Family of Microprocessors

21 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Intel Microprocessors Intel Celeron Processors Intel Pentium-M Processors Intel Celeron-M Processors Intel Xeon Processors Intel Itanium Processors

22 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Evolution of Microprocessors for Macintosh Computers

23 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Other Microprocessor Chips AMD Digital Equipment Corp. Hewlett-Packard MIPS Technologies Sun Microcomputers

24 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Memory Chips Single In-line Memory Module (SIMM): A multiple-chip memory card inserted as a unit into a predesignated slot on a computer’s system board. Installed Memory: The amount of memory included by a computer’s manufacturer on its memory board. Maximum Memory: The most memory that a processor can hold.

25 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Ports Port: A connector through which input/output devices can be plugged into the computer. Expansion Slot: A slot inside a computer that allows a user to add an additional circuit board.

26 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Universal Serial Bus Universal Serial Bus (USB): A general purpose port that can connect up to 128 devices, and also hot swappable, meaning that devices can be plugged in or unplugged without having to shut down or reboot the system.

27 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Add-In Boards Add-in Boards: A board that can be added to a computer to customize its features and capabilities.

28 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Add-In Boards (Continued)

29 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Inside the System Unit Plug and Play Plug and Play: The ability to install devices into a computer when the computer itself makes any necessary internal adjustments.

30 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Processing Sequence The Machine Cycle Machine Cycle: The four processing steps performed by the control unit: fetch, decode, execute, and store. Instruction Cycle (I-cycle): The first two steps of the machine cycle (fetch and decode), in which instructions are obtained and translated. Execution Cycle (E-cycle): The last two steps of the machine cycle (execute and store), which produce processing results.

31 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Processing Sequence The Machine Cycle

32 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall The Processing Sequence Registers Register: A temporary storage area in the processor that can move data and instructions more quickly than main memory can, and momentarily hold the data or instructions used in processing as well as the results that are generated. Four types: –Storage Registers –Address Registers –Accumulators –General-Purpose Registers

33 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Definition Millisecond: One thousandth of a second Microsecond: One millionth of a second. Nanosecond: One billionth of a second. Picosecond: One trillionth of a second.

34 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Definition (Continued) Millions of Instructions per Second (MIPS): The number of instructions the processor can execute per second – a measure of processor speed. Megaflops: Millions of floating point operations per second – a measure of how many detailed arithmetic calculations the computer can perform per second.

35 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed Four elements: –System Clock –Bus Width –Word Size –Available Memory

36 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued) System Clock: A circuit that generates electronic impulses at a fixed rate to synchronize processing activities. –Megahertz (MHz): Millions of electric pulses per second – a measure of a computer’s speed. –Gigahertz (GHz): Billions of pulses per second.

37 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued) Bus Width –Input/Output (I/O) bus: A bus (electronic circuit) that moves data into and out of the processor. –Data Bus: A bus that moves data between the central processor and memory. Word Size –Word: The number of bits a computer can process at one time.

38 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued)

39 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued) Cache Memory: A form of high-speed memory that acts as a temporary holding/processing cell. Coprocessors: A special-purpose chip mounted on a processor board; it is designed to handle common functions quickly and efficiently. Accelerator Boards: An add-in circuit board that increases a computer’s processing speed.

40 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued) Reduced Instruction Set Computer (RISC) –Complex Instruction Set Computing (CISC): A computing instruction set that moves data to and from main memory so often that it limits the use of registers. –Microcode: The instructions that coordinate the execution of the instructions to move data and from memory. –Reduced Instruction Set Computing (RISC): A computing instruction set that takes data for the execution of an instruction only from registers.

41 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued) Pipelining: A computer starts processing a new instruction as soon as the previous instruction reaches its next step in the processing cycle.

42 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued)

43 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued) Parallel Processing: Processing in which a computer handles different parts of a problem by executing instructions simultaneously. –Sequential Processing: Processing in which the execution of one instruction is followed by the execution of another. –Single Instruction/Multiple Data (SIMD) method: A parallel-processing method that executes the same instruction on many data values simultaneously. –Multiple Instruction/Multiple Data (MIMD) method: A parallel-processing method that connects a number of processors that run different programs or parts of a program on different sets of data.

44 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued)

45 Senn, Information Technology, 3 rd Edition © 2004 Pearson Prentice Hall Processor Speed Determining Processor Speed (Continued) Grid Computing: A process that harnesses idle time on computers and then uses them to provide processing for an application that needs more speed and capability than may be available on a single computer, or even on a supercomputer.