Cut twill tape

Mark seam allowance and then pull 1 cm as shown

Pin twill tape in place on FRONT shoulder incline Hand baste to shoulder As you can see the twill tape will pull the shoulder incline and needs to be eased into twill tape

Machine stitch through all thicknesses

Shoulder incline Machine stitch in place and press open Shape with dressmakers’ ham

Adding collar As you can see the collar will fit it’s space perfectly Baste in place from point A to point A on the other side all seams should go together nicely Point A Point A Centre back Point A

Collar shown on both sides with pins Point A Centre back

Once collar is stitched this is what the jacket should look like