Intro The Zeta Group *Electronic Vehicle Control Systems *Solar Lighting Solutions *LED Lighting and Display

ZETA LED Behind LED the Technology What is an LED? LED = Light Emitting Diode A Specially doped crystalline material that emits light when a current is passed through it.

Practical History of LED First Introduced as a practical component in 1962 producing a red light which was quite weak. In the 1970s additional colours and wavelengths became available and we saw yellow and orange light and started being used in calculators, digital watches and test equipment It was not until late 1980s when the rapid growth of LEDs began due to increased technology and better assembly methods. The brightness was 10 times higher than standard LEDs and the Voltage had decreased creating complete power savings. LEDs started being used in digital message displays, medical equipment and bar code scanners In the 1990s LEDs were replacing traditional lighting in traffic signals, automotive application and variable message signs increased in functionality and decreased in price By 2004 the cost – brightness ratio had rapidly reduced due to the volume increasing allowing for new innovative lighting solutions – Zeta LED Launch a range of direct replacement and high powered LED lighting solutions

LED Facts LEDs must be driven by carefully controlling current and not using a fixed Voltage. LEDs are very efficient but still generate a small amount of heat The essential factor when estimating the lifetime of an LED is the ability to extract the heat from the LEDs. Successful heat dissipation will result in a longer lifetime and a brighter output. LEDs have a power rating from 60milliamps up to several 10's of watts.

Advantages of LEDs Lower Power consumption Carbon emission reductions Increased Lifetime Slower degradation of Light(NB.50000hours)* Ability to dim and colour change Improved Colour Rendering Index (CRI) for some light sources (sodium replacement)

Safety Issues No UV No Mercury No Infrared Street lighting replacement = better CRI when replacing SON fittings CCTV – truer colours that allow subjects to be identified accurately Voltage reduced down to 12v meaning a safer application and installation.

Manufactures There are now a number of quality reliable LED manufacturers including: Nichia Osram Cree Phillips Seoul semiconductor

Thermal Design Many Early LED lamp failures were due to the lack of understanding surrounding heat management with LEDs. This lack of knowledge resulted in a lifetime of around 2000 hours and not the predicted 50,000 hours. Thermal Design is the single most important consideration when designing LED Luminaries

Power Supply technology Power supply's must provide a well regulated constant current to LEDs. Power supply lifetime must match the LED lifetime rating otherwise the luminaries will fail to achieve the full running time. Low cost LED solutions can use power supply's that are only rated at 5000 hours and therefore fail even though the LEDs are rated at 50,000 hours.

Mis leading Information LED technology has been surrounded by misleading information that has contributed to the poor reputation attracted in early 2000 White Light lifetime of 100,000 hours this is untrue – red LEDs can last for up to 100,000 hours. Replacing epoxy with silicone can increase a white LED lifetime to 100,000 (Cambridge University 2009) LEDs are direct replacements for traditional fittings – This is misleading as an assessment is required to ensure the lighting distribution and intensity required is matched once this has been carried out they can be direct replacements.

Slow Progression As all new technologies when the first LEDs became available the price was extremely high and the performance was relatively mediocre. Improvements in materials, assembly and the understanding behind the physics of degradation has lead to an increase in performance and reliability of modern LEDs. This combined with an increase in market penetration lead to a rapid price reduction by approximately a factor of 5 in the last 5 years.

Flexibility LEDs have the ability to be more flexible than their traditional counterparts as:  They are smaller in size allowing for design possibilities involving different shapes sizes and angles.  They come in a variety of colours and not just standard red, blue, white etc – colours can be mixed to generate a company specific colour i.e. shades of blue and green.  They have the ability to be completely controllable in colour and in brightness.

Situational When using LED Lighting it is necessary to ensure the light being provided will substitute the traditional source. To ensure you get the correct lighting effect you must Have a full site survey including luminaire height and light distribution Select the correct lighting and and number of fixtures to light the area. Trial the area to witness the change in lighting and benefits If task lighting is needed add this at a energy cost as little as 3w to increase specific lighting.

Feature, Task and mood Lighting As well as general lighting LED light sources can be used as feature, task and mood lighting as the light can be designed into flexible strips, concealed water proof units and specific directional fittings. Feature lighting includes – LED building up lighters reducing energy consumption as much as 700 watts. Also strip lighting that can be used to illuminate internal and external features that is as small as 15mm wide with a thickness of 5mm. Mood Lighting – RGB (red,green,blue) LED are easily manufactured and controllable with the option of now replacing a 60W incandescent with an 8w wireless controllable LED RGB lamp (Zeta LED). Task Lighting – task lighting has become a popular way of illuminating office areas, shops and even homes using Gu10 and MR16 bulbs rated at between 25 – 50W these can now be replaced by as little as 3w – 5w of LED lighting (taking situational factors in to consideration).

Disposal, reliability and health issues Disposal – when disposing of a traditional light fitting there are a number of issues to be addressed p wee charge – disposal cost 2. Mercury content – unable to dispose of through normal waste procedures Reliability – When using a Zeta LED by using the latest LED technology offer 50,000 hr lifetime to 40% reduction in output Health Issues: 1. NO Ultra Violet (UV) 2. No Mercury 3. No Flicker 4. Helps prevent SAD – Seasonal Affective Disorder

CSR Corporate Social Responsibility – The triple bottom line in business defined as: People, Planet and Profit. Maximising the efficiency of these 3 is what a business should be looking to do. LED lighting fits into all 3 of these categories: People – a healthier light offering no UV, eliminating flicker, no mercury and prevention of Seasonal Affective disorder. Planet – reducing energy consumption and Carbon emissions by up to 70% when replacing traditional fittings. Profit – energy consumption reduced and therefore energy bills reduced directly. The longer life of the products also requires less maintenance and therefore less administration, replacement, labour costs.

Zeta Zeta LED offer internal and external solutions for new build and retrofitting. Focusing on: 1. Energy Savings 2. Carbon Emission Reduction 3. Lighting Levels to match or exceed traditional luminaire illumination levels With 7 years of LED luminaire design, testing and installation experience Zeta LED believe it has some of the markets best alternatives to traditional inefficient lighting. Holding patents for a number of the world first LED direct replacements Zeta is at the forefront of LED and design Technology.

Zeta Products High powered floodlight replacement: Using Zeta Technology we can replace a 500W Halogen floodlight with a 60W LED solution that is brighter and more efficient (see product 1) Low powered LED tube replacements – replacement of energy intensive Fluorescent tubes with Zeta LED tubes can save over 50% in energy.(see product 2) LED ceiling panels that offer a larger LUX reading at desk and floor level that 4 fluorescent tubes. ( see product 3) LED Light Guide Panels – used in road signs, advertising signage and for low level lighting. ( see product 4) For more examples of LED solutions visit

Zeta Products Product 1:60W LED Flood LightProduct 2: LED Tube replacement Product 3:40W LED ceiling panelProduct 4: LGP

Common Room Trial Replacement lamps:- 155xMR16 5w replacing 50w halogens 25x led tubes 22w replacing 70w fluorescents 8x led bayonet6w instead of 40w incandescent. Cost of replacements-£5500+installation See savings!!

Common Room Savings ANNUALEnergy saving£4580 Carbon Saving28Tonnes Maintenance£3800 ANNUAL Total£8380 LIFETIMEEnergy? Carbon? Maintenance? Total Breakeven In year 1

What Can You do to save energy? 1)Have a Zeta “brief” review of options. 2)Survey and cost/saving proposal 3)Review funding options available 4)Save energy, save maintenance, save money, Save the Planet!! Remember:- Corporate Social Responsibility- People,Planet & Profit!