View IP camera over NAT network CVPP/CVPL Configuration Internet Surveillance Cam Viewer Plus Copyright © PLANET Technology Corporation. All rights reserved.

2 / 12 Case Study Scenarios explain : Assuming we have 3 different LAN with 3 routers and now we want to view all the cameras on one of LAN host with CVPP/CVPL. What do we needs to change ? Please carefully follow the instruction step for more understandings. LAN 1 Why does my camviewer plus not have image ? LNA 2 LAN 3 Network : :

3 / 12 A. First of all, we have to establish the firewall policy of router, in LAN-2 we using Virtual Server to forward all the camera port access, please see below indicated. 1 2 Case Study

4 / 12 Case Study B. After configured the router, please successively begin setup the Network setting of IP camera according with previous firewall policy for IP Address and HTTP Port. 3 4

5 / 12 Case Study C. Go back to CVPP/CVPL host of LAN-1 manual insert the account information of remote IP camera into the camera list Name : ICA-H312 Address : Port : 81 Account : admin Password : admin Vendor Name : PLANET Device Name : ICA-HM312

6 / 12 Case Study D. To change the video profile for RTSP/HTTP protocol, and later CVPP/CVPL will to capture streaming by http port. 8 9 Before connecting to IP camera, the video profile will shows a blank, please wait a moment and try again.

7 / 12 Case Study E. After completed above settings, you could begin monitoring remote station by CVPP. a)If you want to monitoring many IP camera with CVPP/CVPL over different LAN, please be sure check your network bandwidth whether enough for this case. b)The mentioned parameters and network settings in this sample are according to our network environment, please carefully to modify meet your real-world application.