FSTS Leak Rate Qualification Procedure J. Botelho Direito EN/CV/PJ 29/11/2012 FSTS - Leak Rate Qualification Procedure.

Slides:

Advertisements

Similar presentations

13 mm (1/2) PRO-FLO X ORIGINAL METAL UL 79 LISTED PUMP.

Advertisements

TROUBLESHOOTING. 5WSS TROUBLESHOOTING ERROR CODEFAULTY INDICATION E1ROOM SENSOR CONTACT LOOSE E2INDOOR COIL SENSOR CONTACT LOOSE E3WATER OUTLET SENSOR.

PRESSURE TEST Hook tester up to tank inlet line. Pump tester up to 10psi (.7 bar) The line and carb should hold pressure for 1-min. Checks for leaks at.

FSTS “water hammer” Running mode Pressure profile of the “water hammer” pulse – Joukowsky Equation FSTS Running worst case scenario : – instant closing.

6/3/2015Auke-Pieter Colijn1 C3F8 NIKHEF Design Compare Does it work?

Elevation It gets colder the higher in elevation you go. As air rises, it expands because of lower air pressure. As the air expands, it cools. When air.

Spiral Condensors. Working Principle The Spiral Condensor consists of two sheets stainless steel strips which have been wounded from the centre.

Given Connections Solution

Thermosyphon - Free Cooling

Condenser supply contract report Jose Botelho Direito EN/CV/DC Thermosyphon cooling workshop §5 Thursday, October 20, 2011.

Colligative Properties

Theodore Todorov Pixel mechanics november 8th Inner detector upgrade / IBL Activities on cooling LAPP LAPP team Jacky Ballansat, Patrick.

M. Battistin – 1 st September 2009 EN/CV/DC 1 M. Battistin (EN/CV/DC) 1 st October 2009 ATLAS cooling Group - Thermosiphon solution for ATLAS ID cooling.

CO2 cooling pressure drop measurements R. Bates, R. French, G. Viehhauser, S. McMahon.

1 Air Conditioning Pressure Switches. 2 High Pressure switch Used to protect the compressor When condensing temp gets too high Reads High Side Pressure.

Some results of vacuum stand investigation.. 1. Restoration of turbopump inlet valve V1 tightness The inlet turbopump valve of the first pump station.

Pierre Bonneau EN/CV/DC

Tracker Thermal Control System 2015年9月13日星期日 2015年9月13日星期日 2015年9月13日星期日 1 AMS-TTCS Status Report AMS-TIM meeting, CERN, Oct.28 th, 2008 ZH He On behalf.

Detector Cooling Project Thermosiphon Project Status Report

1 Liquid Hydrogen R&D test report Video Conference – 23/08/12 S Watson P Warburton M Courthold.

The Smarthome in Europe Belgium: Engelen Mathias, Profeta Alessio, Verbiest Sam HEATING AND AIRCO.

F-595 Chiller contract report Jose Botelho Direito EN/CV/DC Thermosyphon cooling workshop §5 Thursday, October 20, 2011.

WEL COME TO COE RAC SECTOR ITI UTTARSANDA. MODULE :-V COMPUTER AWARNESS AND COMMERCIAL REFRIGERATION.

PIMS IN INSTITUTE FOR NUCLEAR STUDIES Brazing Andrzej Soltan Institute for Nuclear Studies.

Lesson 2 How do electric circuits work?. Electric Circuits You know that electric circuits only work when the circuit is closed. OPEN.

REFRIGERATION SYSTEMS

Some notes about liquid Hydrogen target 1.How it operates 2.Modification Target length, empty mode 4.Status.

J. Direito - M. Battistin – 28 th May 2010EN/CV/DC J. Direito, M. Battistin (EN/CV/DC) 28 th May 2010 Detector Cooling Project III Thermosiphon Workshop.

Full Scale Thermosyphon Design Parameters and Technical Description Jose Botelho Direito EN/CV/DC 19 November, th Thermosyphon Workshop.

LHCb-VELO Microchannel fracture safety system and evaporator concept 26 June 2015 Bart Verlaat 1.

Fabrication and measurement of RF components for CLIC study

Cooling plant upgrade Jose Botelho Direito, Michele Battistin, Stephane Berry, Sebastien Roussee 2 nd SPD Cooling Workshop 30/11/201112nd SPD.

SP05 SP04 SP03 SP02 SP01 SP11 SP10 SP09 SP06 SP07 SP08 BRAZING JOINT DETAILS Brazing joint no Joint Name /Description SP01Suction to valve joint SP02.

Rankine Cycle for Power Generation By P M V Subbarao Mechanical Engineering Department I I T Delhi An appropriate amalgamation of Theory and Practice.

Armaan Tejpal and Yugansh Sehrawat 5-c. Definition Evaporation is the vaporization of a liquid Evaporation is the reverse of condensation Liquid molecules.

1 Liquid Hydrogen R&D test report CM34 – 17/10/12 S Watson P Warburton M Courthold.

Cryogenic scheme, pipes and valves dimensions U.Wagner CERN TE-CRG.

Thermosiphon Project for ATLAS ID C 3 F 8 Evaporative Cooling - Status Report ATLAS ID Week CERN – Geneva October 28 th, 2013 M. Battistin & all TS team.

Refrigeration What's Refrigerated? What makes up a system?

110 th November 2010EN/CV/DC Detector Cooling Project - advancement status of Work Package N3 Thermosiphon project Michele Battistin 18 May 2011.

Thin Film Technology - Student Talk Sophie Chauvin 02/02/16 Leak Detection method for Vacuum Systems 1.

 A. The air pressure is lower  B. The volume is lower  C. The volume is higher  D. The air pressure is higher.

Cloud Formation Do Now: Science Trivia Pressure Song 3 times.

SIS 100 Vacuum chamber Recooler String system Components

By: Marie-Tres,Demi . and Dáire

He Plant, LN2 Systems and Commissioing

Design of the thermosiphon Test Facilities 2nd Thermosiphon Workshop

A question of science Circuit Symbols

Compressible Flow Turbines

ATLAS Thermosiphon Readiness Review 17th March 2016

Tracker cooling loop “check out” draft for discussion

Mathieu, Gabriel, Max, Spyros, Guillaume

Distillation First the mixture is heated up.

ATLAS Thermosiphon Electrical Distribution and Run Modes

International Union for Vacuum Science, Technique and Applications

Pressure oscillation and the damper function

Made and presented by Kieran Hancock

ולידציה מול כיול-השונה והדומה

LEGEND High press Low press Liquid vapour mixture

Peanut Butter and Jelly

Instructions: Adding refrigerant fluid to system

Day 9 - Humidity Science 10 Weather.

The Heat Pump-pumps heat from a cold area to a warmer area.

Rifat Kangi Bled, Slovenia

Characteristics of Ideal Working Fluid in Vapour Power Cycle

3 3 R2 R2 R1 R1 RM R3 R3 R4 R v0 v0 Problem 1 (100%)

A study on Loviisa NPP (VVER-440) dose rate measurement's ability to detect small primary-to-secondary coolant leaks A. Ketolainen ISOE European Symposium.

Vacuum System Design for the Target Monolith System

Presentation transcript:

FSTS Leak Rate Qualification Procedure J. Botelho Direito EN/CV/PJ 29/11/2012 FSTS - Leak Rate Qualification Procedure

Leak Rate Qualification Process 29/11/2012 FSTS - Leak Rate Qualification Procedure

Maximum Leak Rate for the FSTS He Leak Rate [mbar.l/s] (inlet pressure of 0.1 mbar) Number of connections (or locations to be tested) Maximum leak rate per connection Condenser3.47x x10 -4 Vapour line5.62x x10 -4 Liquid line3.22x x10 -6 Brine Circuit1.53x x /11/2012 FSTS - Leak Rate Qualification Procedure

Validation Pressure Test 29/11/2012 FSTS - Leak Rate Qualification Procedure Thermosyphon Circuit – Return LineThermosyphon Circuit – Condenser

Validation Pressure Test 29/11/2012 FSTS - Leak Rate Qualification Procedure Thermosyphon Circuit – Liquid LineBrine Circuit