Form 5 ™ Malleable Iron Conduit Outlet Bodies Crouse-Hinds Training Module

Outline z Applications z Features z Certifications and Compliances z Body Configuration z Covers z Creating a catalog number z Marketing Materials Form 5 ™ Malleable Iron Conduit Outlet Bodies

Applications Form 5 Conduit Outlet Bodies are used in conduit systems to: Act as pull boxes for conductors being installed Provide openings for making splices and taps in conductors Act as mounting outlets for lighting fixtures and wiring devices Form 5 ™ Malleable Iron Conduit Outlet Bodies

Applications (continued) Connect conduit sections Provide taps for branch conduit runs Make 90°bends in conduit runs Provide access to conductors for maintenance and future system changes Form 5 ™ Malleable Iron Conduit Outlet Bodies

Features Form 5 ™ Malleable Iron Conduit Outlet Bodies Malleable iron construction provides high impact resistance and ductility Available threaded for rigid / IMC conduit Built-in rollers on 1 1/4” to 4” Type C and LB bodies to facilitate wire pulling Available in SnapPack Pre-packaged body, cover and neoprene gasket

Features Form 5 ™ Malleable Iron Conduit Outlet Bodies Interchangeable with Appleton ® Form 35 ® and O-Z/Gedney ® malleable iron conduit outlet bodies Smooth and rounded integral bushings for protection of wire insulation Appleton and Form 35 are registered trademarks of EGS/Appleton Electric. O-Z/Gedney is a registered trademark of EGS/O-Z/Gedney.

Certifications and Compliances UL Standard 514B CSA Standard C22.2 No. 18 Form 5 ™ Malleable Iron Conduit Outlet Bodies

CLBLLLR Available in seven body types: Form 5 ™ Malleable Iron Conduit Outlet Bodies T TBX

Neoprene Gaskets Sheet Steel Covers Domed for additional cubic capacity Stainless steel self retaining cover screws Perforated center that can be easily removed Form 5 ™ Malleable Iron Covers

Available in ½” – 4” ½” through 2” covers are a flat design 2½” through 4” are domed design. Captive, stainless steel screws for attachment of cover to body. Certified to UL and cUL standards. Form 5 Cast Covers

Form 5 ™ Malleable Iron Covers Integral Gasketed Covers The Sheet Steel cover features a raised dome supplied with stainless steel screws supplied with nylon washers and gasket Simplifies installation, reduces inventory and labor cost UL and cUL listed and are NEMA 4 rated Available in ½” – 4”

Creating a catalog number LB 75 M Body Type 50 = 1/2” Malleable iron C 75 = 3/4” LB100 = 1” LR125 = 1-1/4” LL150 = 1-1/2” T200 = 2” TB250 = 2-1/2” X300 = 3” 350 = 3-1/2” 400 = 4” Form 5 ™ Malleable Iron Conduit Outlet Bodies SnapPack is available for the following configurations: LB, LR, LL, C & T ½” – 2” Simply add CG suffix to the part #

z New Form 5 ™ Brochure z Competitive Cross Reference z z Samples Marketing Materials Form 5 ™ Malleable Iron Conduit Outlet Bodies