© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard ReliaTel Operator Training Release Performance Dashboard 1 Training - Version 1.0

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard About the Performance Dashboard Reports on device performance, based on preselected criteria Open from Dashboard tab at top Dashboards available for both centers and entities Each view (center or entity) comprised of multiple portlets Default layouts provided for centers and entities; portlets preselected and positioned Operators can modify portlet selection if given the permission ‘Extended View’ Centers display alarm-relevant data Total alarms by severity Evaluation of entities by alarm count and severity Time to ACK and time to CLR statistical analysis Alarm List for that center Entities display performance related data Data determined by type of entity being monitored Alarm List for that entity Alarming can be initiated, based on performance metrics 2

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard Center View - Default 3

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard Using the Center View – What you should know Roll over graph areas with your mouse pointer to view details Alarm List Portlet Same functionality as available in the Alarm List Synchronizes between the Alarm List in the Alarm Module and this view ‘Dual’ direction synchronization 4

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard Using the Center View – What you should know Alarm Response Time Distribution heat map Measures response time to acknowledge and clear alarms Three alarm severities measured – CRI, MAJ, MIN For each severity the ‘time to respond’ criteria for measuring is preset New alarms Identifies the alarm that has been in a New state the longest without being acknowledged and notes the time Displays the average time it takes to acknowledge new alarms Acknowledged Alarms Identifies the alarm that has been in an Acknowledged state the longest without being cleared and notes the time Displays the average time it take to clear acknowledged alarms 5

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard Entity View - Default 6 Pre-defined, default layout view

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard Entity View – Things you should know Gauge display – with alarming and without Alarming Thresholds are default configurations, included in deployment ReliaTel administrator may modify these default settings 7 Metric gauge with alarm thresholds Metric gauge without alarm thresholds

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard Entity View – Things you should know Graph Roll-over tool-tip Graph line filtered Chart settings configured 8

© Copyright 2013 TONE SOFTWARE CORPORATION. Confidential and Proprietary. All rights reserved. ® Operator Training – Release Performance Dashboard Managing Dashboard Views Operators with Extended View permission (granted by the ReliaTel Administrator) are able to manage dashboard views; if you see this feature you have Extended View permission. Add, remove, rearrange portlets and save the new view Create a private, default view for a class of entities Operator’s views are private, not shared 9 Save view as…after rearranging, adding, removing portlets you can save that view, to be recalled later. User Default - Selected views can be set as user default views for entities; all entities of that class will inherit this default view. Delete view – personally created views can be deleted Clear all – pertains to views that have been pinned to entities – this option clears all pinned views Save view – allows you to save a customized view if you have made further changes to it.