VeriFire Tools Network Diagnostic Utility

Overview Allows user to check various statistics and software versions of panels and DVC’s. Only available in online mode

Network Statistics Shows a view of all the traffic within the network as your selected node sees it.   When you initiate this service, you have the option to view the entire network or one other selected node through this "node’s eye view".   Checking the "Reset All Nodes" option clears all previous network responses in the statistics screen. NOTE: This services requires a network node be designated as a point of reference before you monitor the network.

NUP Port Statistics Displays the total number of messages transmitted to and from an individual node on the network. Contact NOTIFIER Technical Services to use the information in both of these services to diagnose problems that may occur within your network.

NUP Port Statistics

Software Versions Displays version numbers of software currently installed on either a selected node or all nodes in the network.   Incompatible or out-of date software is highlighted.  

Software Versions

Software Versions

VDSL Statistics Opens the HS-NCM VDSL Statistics Service to view network traffic statistics.

VDSL Statistics

Ethernet Statistics Opens the Ethernet Statistics Service screen, displaying Ethernet statistics to verify integrity and troubleshoot network wiring.   Available for high-speed (HS-NCM) networks only.

Export All Statistics Exports all statistics, except for the DAP statistics, to an Excel spreadsheet

Export All Statistics

Export All Statistics

Export All Statistics

Network Test Runs a communication test between selected nodes on the network.   The test procedure will be aborted if a real event occurs anywhere on the network. There should be no activity on the network before performing the test.

Network Test Software Versions need to be correct Network needs to be in style 4 Verfire needs to be connected to an end node MUST know the network layout (which node is connected to which) Can debug by building network out or breaking network down

Network Test Make sure the wire is good before replacing parts For the worst case scenario build a network out node by node A network is not considered reliable if the network test fails All nodes on the network should pass the network tests Errors are only caught if they occur while a test is in progress.

Network Test

Network Test

Network Test

Network Test

Network Test

Network Test

Network Test

DAP Statistics Displays current network statistics of the DAP communications between DVC and attached Digital Audio Loop (DAL) devices.

Only available on DVC V4.0 and above DAP Statistics Only available on DVC V4.0 and above

Export All DAP Statistics Exports DAP statistics to an Excel spreadsheet, with a separate worksheet for each DVC node.

? Blah,Blah,Blah, Blah,Blah,Blah. What was he talking about ? Z z z z z z z z z z Questions, Comments, Ideas ? Basic Fire Alarm Technology