Australian Monitor Products Here is a look the AMIS product line & some of our other products from AM Pro & AMAV

Clever Features, Contractor Friendly

Entry level mixer amp range 3 dual balanced mic/ line inputs Overall bass and treble controls 100V and 4 ohm outputs Vox muting on channels 1 Facility for optional Bell, Pre Announce, Evac and Alert tone board Balanced XLR 700mV output for connection to multiple power amplifiers Tape Output AMC Series Mixer Amplifiers 30/60/120/250 Watts

4 dual balanced mic/ line inputs Overall bass and treble controls 100/70V and 8 ohm outputs Vox muting on channels 1 and 2 Bell, Pre Announce, Evac and Alert tones in-built Phantom power on all mic inputs (defeatable by rear switch) VCA Remote Master Level Control Insert Point Vox Triggered Relay Output 6 zone speaker selector with ‘all call’ Balanced XLR 700mV output for connection to multiple power amplifiers Tape Output 240V AC/24 DC operation AMIS60/120 Mixer Amplifier 60 & 120 Watts

8 dual balanced mic/ line inputs Selectable Input Sensitivity Overall bass and treble controls 100/70V and 8 ohm outputs Vox muting on channels 1,2 and 3 Bell, Pre Announce, Evac and Alert tones in-built Phantom power on all mic inputs (defeatable per channel by rear switch) VCA Remote Master Level Control Insert Point Vox Triggered Relay Output Balanced XLR 700mV output for connection to multiple power amplifiers Tape Output 240V AC/24 DC operation and 2RU AMIS120XL Mixer Amplifier 120 Watts

6 dual balanced mic/ line inputs Overall bass and treble controls 100/70V and 8 ohm outputs Vox muting on channels 1 & 2 Bell, Pre Announce, Evac and Alert tones in-built Phantom power on all mic inputs (defeatable per channel by rear switch) Insert Point Balanced XLR 700mV output for connection to multiple power amplifiers Tape Output 240V AC/24 DC operation and 2RU Vox triggered relay outputs & Remote VCA Master AMIS250 Mixer Amplifier 250 Watts

Balanced XLR line level input with parallel outputs Signal Present LED Rear panel level control Current limiting 100/70V, 4 and 8 ohm outputs 240VAC / 24V DC and 2RU AMIS120P/250P 120 & 250 Watt Power Amplifier

Balanced XLR line level input with parallel outputs Signal Present LED Rear panel level control Current limiting protection 100/70V, 4 and 8 ohm outputs per amplifier 2 RU 240VAC/24V DC AMIS1202P 2 x 120 Watt Power Amplifier

Balanced XLR line level input with parallel outputs Signal Present LED Rear panel level control Current limiting protection 100/70V, 4 and 8 ohm outputs per amplifier 2 RU Linking switch to link each input through to the next amp 240 VAC or 24 VDC operation Bi colour status LED per amplifier Balanced XLR line level inputs Dual speed fan AMIS480P 4 x 80 Watt Power Amplifier

6 Mic/Line AMS standard Inputs XLR switch able between Mic & Line level Bi colour signal present LED indication per input +/- 15 dB of gain trim per input Overall Bass and Treble EQ Phantom Power Record Output Balanced XLR Output 240v AC/ 24v DC / 1RU Optional remote Master VCA Control Optional Muting and Tone Generator Modules MX61 Mono Mixer

8 Mic/Line switchable XLR inputs 6 with dual RCA line input Dual colour status LED per input +/- 15dB gain trim per input Bass and Treble EQ per Channel Individually switchable Phantom Power per input Record Output Balanced XLR Output 240v AC/ 24v DC / 1RU Remote Master VCA Control Optional Muting and Tone Generator Modules MX81 Mono Mixer

8 Zones (expandable to 16 zones) Remote Paging Stations on CAT-5 Cable Remote Source Selection and Volume Control on CAT-5 Cable Muting and Tone Generator Built-In Bass and Treble per zone 240V AC/ 24V DC Digipage Background Music and Page Routing System

Mic/Line inputs which are ‘local’ inputs –one per zone and just for that zone: 6 Mic/Line inputs routable to any of the 8 zones (or 16 when a slave unit is added) 1 SUM input which has total priority over all other inputs The SUM input has it’s own level control. 4 CAT-5 ports which are used to connect to remote zone paging microphones and the remote source/volume selectors which are daisy-chained on CAT-5 cable

The DigiPage Wall Panels allow users to select up to six program inputs and adjust volume in their zone. Both the microphone stations and wall panels are easily connected in a daisy chain format via CAT-5 cable. The DigiPage Microphone stations come in 8 zone or 16 zone versions. Both the microphone stations and wall panels are easily connected in a daisy chain format via CAT-5 cable. The DigiPage Microphone stations come in 8 zone or 16 zone versions. Both the microphone stations and wall panels are easily connected in a daisy chain format via CAT-5 cable. Digipage Accesories

The ZM 3 is a high audio quality 1 RU stereo zone mixer 4 stereo input sources & 2 mic/line inputs, each individually selectable to each of the 3 stereo output zones Remote Volume & background source selection will also be available from remote wall panels Each zone will have a bi-color signal present/overload LED on the front panel as well as remote enabled LED Each zone will have 5 stage EQ with a security cover A zone paging mic will be available to page into individual zones or all call A sum input (mono) will have shared priority with mics/line inputs over programs sources One Program input will have priority over the other program inputs (this will be internally One Program input will have priority over the other program inputs (this will be internally defeatable per zone) Zone Mix 3

Internal switchable Vox muting for mics over line sources High audio spec for foreground (loud) music systems Wall panel wiring per zone to determine whether wall panel volume controls music only or mic as well Internal stereo/mono link for each zone ( both zone outputs get the same feed in mono mode) Addition of a link output on the rear panel for linking program sources to a second Zone Mix 3 Bi colour status LEDs per output Global 18v phantom power 24 VDC operation Remote VCA master control per output

1 RU multi zone assignable mixer 6 Mic/line inputs Each input individually assignable to any or all 4 line outputs LEDs for each output assign switch Bi colour status LED per input Treble & bass control per input ZRM4 Zone Routing Mixer

8 Zone, 100 Volt Line or low impedance Monitor Panel Connects to 100v Output or low impedance output of up to 8 Amplifiers Includes Speaker and Volume Control Level Indication Signal Present LED per Channel 2RU 240v AC MP8 Monitor Panel

2 Balanced XLR mic or dual RCA line inputs 6 Balanced XLR outputs with variable output level 4 Segment LED metering per input 24v Phantom power available for each input Simple input assign switches for each output Extremely low noise, high audio spec AMIS26 Distribution Amplifier

3 models available – Dual CD/MP3 player, Dual AM/FM Tuner, CD/MP3 player & AM/FM Tuner MP3 compatible CD player with optional IR control AM/FM tuner with 10 presets Programmable Single CD player up to 20 tracks 1 RU chassis Stereo outputs for CD & Tuner Priority output AMIS BGM Series Dual Program Source

The Australian Monitor Pro Series is a range of low impedance audio products aimed at the entry to mid level live sound/hire/installation market. As with our AMIS range we aim to give the contractor the best sound quality & reliability for reasonable price. The AM Pro range includes; Speaker systems Dual channel & multi channel amplifiers Mixing consoles Audio processors Cables & connectors Maximum Performance

So there you have the quick AM product overview Remember if you need design assistance or any technical enquiries we are only an away.