WIRELESS N300 MULTI-WAN ROUTER DWR-116 WIRELESS N300 MULTI-WAN ROUTER

ACCESSING THE WEB UI To access the Web UI of the DWR-116, connect your computer to the DWR-116 using the ethernet cable provided. Then connect the power cable to the DWR-116. Then simply open a browser window and enter the IP address in the browser address field:

SETUP 3G/4G/LTE CONNECTION Once you have successfully accessed the Web UI of the DWR-116 you will need to go to the following location to configure your 3G/4G/LTE connection settings. SETUP > INTERNET Click on the Internet Connection Setup Wizard button to start the wizard, below we will go through the required settings to setup a 3G/4G/LTE connection.

Click on Next to start the Setup Wizard. It is recommended to setup a new password for your DWR-116. Please enter a new password below. Once you have entered your new passwords click on Next.

It is recommended to configure the Time Zone to synchronise with the Internet Time Servers. Please select your Time Zone, then click Next.

In this example we will be configuring the Internet connection as 3G/4G/LTE. Select 4G LTE / 3G from the selection then click Next.

Please enter your ISP details here, the username and password fields are optional and not required for most connections. If you are unsure of the correct details please refer to the table on the next page for the most common settings for ISPs. Once you have entered the correct details for your connection click Next.

Australian 3G/4G LTE Providers

New Zealand 3G/4G LTE Providers

Click on Connect to make the changes effective immediately.

BigPond - 3G/4G Settings Open an Internet Browser and in the address bar, type in http://192.168.0.1 The default username is admin and the password is left blank.

Select [Manual Internet Connection Setup] under [SETUP] > [INTERNET]

Select [ 4G LTE /3G] under INTERNET CONNECTION TYPE Enter your Telstra Bigpond Username in the email format eg. xxxxx@bigpond.com Enter your Telstra Bigpond Password Dialed Number enter [ *99# ] Authentication select [ Auto ] APN is [ telstra.bigpond ] NOTE: it is case sensitive Ping Code : Some Bigpond SIMs requires a [Level 2 PIN code] also called [PIN2 code] from Bigpond in order to establish 3G/4G connection. You will need to contact Bigpond Support to locate this specific infomation. Reconnect Mode select [ Auto ] Keep Alive choose [ Use Ping ] Ping IP Address type in [ 8.8.8.8] Click on [Save Settings] button to apply the changes.

Optus - 3G/4G Settings Open an Internet Browser and in the address bar, type in http://192.168.0.1 The default username is admin and the password is left blank.

Select [Manual Internet Connection Setup] under [SETUP] > [INTERNET]

Select [ 4G LTE /3G] under INTERNET CONNECTION TYPE Leave both Username and Password blank (nothing) unless specified by your 3G/4G Provider Dialed Number enter [ *99# ] Authentication select [ Auto ] APN is [ connect ] NOTE: it is case sensitive, please refer to the following page for Optus recommended APN settings Reconnect Mode select [ Auto] Keep Alive choose [ Use Ping ] Ping IP Address type in [8.8.8.8] Click on [Save Settings] button to apply the changes.

Telstra - 3G/4G Settings Open an Internet Browser and in the address bar, type in http://192.168.0.1 The default username is admin and the password is left blank.

Select [Manual Internet Connection Setup] under [SETUP] > [INTERNET]

Select [ 4G LTE /3G] under INTERNET CONNECTION TYPE Leave both Username and Password blank (nothing) unless specified by your 3G/4G Provider Dialed Number enter [ *99# ] Authentication select [ Auto ] APN is [ telstra.internet ] NOTE: it is case sensitive Reconnect Mode select [ Auto ] Keep Alive choose [ Use Ping ] Ping IP Address type in [8.8.8.8] Click on [Save Settings] button to apply the changes.

Vodafone - 3G/4G Settings Open an Internet Browser and in the address bar, type in http://192.168.0.1 The default username is admin and the password is left blank.

Select [Manual Internet Connection Setup] under [SETUP] > [INTERNET]

Select [ 4G LTE /3G] under INTERNET CONNECTION TYPE Leave both Username and Password blank (nothing) unless specified by your 3G/4G Provider Dialed Number enter [ *99# ] Authentication select [ Auto ] APN is [ vfinternet.au ] for Postpaid SIM - Please use [ vfprepayMBB ] For Prepaid SIM Reconnect Mode select [ Auto ] Keep Alive choose [ Use Ping ] Ping IP Address type in [ 8.8.8.8 ] Click on [Save Settings] button to apply the changes.

Q & A