DARIM SeeHawk5.1 Software Quick Guide 1.SeeHawk Software Installation. 2.Connection. 3.Monitoring. 4.Sensor Setting. 5.Image memory. 6.PTZ Control. 7.Audio Control.

1-1. Software Download( ftp://darvision.com/pub/seehawk/software/seeHawk5.1/sh5160.exe ) from darvision FTP site.ftp://darvision.com/pub/seehawk/software/seeHawk5.1/sh5160.exe 1. SeeHawk Software Installation Software download from Darvison FTP Softwae Install Methode and information Software execution and exit. Double Click

1-2. Install configuration setting Software Installing… 1. Start install 2. Click 3. Installing 4. Click

1-3. Software Execution and Exit. Exit Icon does click. SeeHawk Icon in windows background screen does Double Click. Connection Ready(status edit) SeeHawk Software execution. At early, Software is Disconnect state. Exit Double Click Default is Disconnect State. Exit Button

2. Connection 2-1. Direct RS232 Connection PSTN Line Connection Direct RS232-Connection 4. Password 5. Click 1. Click 2. Com Select. 3. Port Select.

2-1. PSTN Line Connection 1. Click 2. Click 3. PC MODEM 4. Password 6. Click 5. SeeHawk Phone number

3-1. Live Monitoring… 3. Monitoring 3-1. Live Monitoring Callback Monitoring Camera Selection. 3. Click “O.K” 1. Click 4. Channel Start/Stop 5. Image Size Zoom 6. AVI Capture 7. JPG Capture 8. Quality Select. 9. Image setting.

3-2. Callback Monitoring… 1. Click 2. CallBack Properties 3. CallBack Phone Number(PC) 4. Click 5. Sensor Select. 6. Save(Click) 7. Click 8. Click “O.K” 9. Click 10. Sensitivity Setting. 11. Click(into the Callback Mode) 12. CallBack Mode icon 13. Receive Video Data after automatic connection by Callback. 14. Live Mode (Ready Mode)

4-1. Digital Input setting. 4. Sensor Setting… 4-1. Digital Input Setting Relay Output Setting. 4. Check… 3. Check… 6. Check… 8. Check… 5. Number Image of Capture 7. Save(Click) 9. Alarm Image 2. Click 1. Click

4-2. Relay Output setting. Do On/Off by Click. Direct Relay On/Off 4. Automatic On/Off 1. Click 2. Click 3. Click

5. Image memory. 5. Image Memory. 1. Click 2. Click Snapshot Images 4. Select 3. Click From SeeHawk5. 1 Image Size

6. PTZ Control. 6. PTZ Control 1. Click 2. Select 3. Select 4. Control

7. Audio Control 7. Audio Control. 1. Click 2. Select (Line-in/mic) 3. Click Mic/Line On/Off 4. Click Spk On/Off 5. Sh5.1 spk On/Off 6. Sh5.1 Mic On/Off 7. AGC/AEC On/Off Full-Duplex Audio In/Out