Cold Chain Solutions

ShockWatch Cold Chain Solutions Increasing Value to Customer Intelligent Monitoring System TrekView ColdMark2 WarmMark2 Real-time Monitoring Performance Multi-use recorder Single use Low cost Go – No/Go Data Recorders ColdMark WarmMark Chemical Indicators Price

WarmMark®2 and ColdMark®2 Temperature Indicators

WarmMark2 & ColdMark2 Single-use, single temperature threshold indicators Field-armable Easy-to-read with a definitive color change Accurate & affordable Identifies out-of-tolerance temperature conditions

WarmMark2 Features Best-in-class ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the exposure. 1. Field-armable with button push 2. Temperature sensitivity 3. Unique identifiers for enhanced shipment tracking 4. Shows “ON” to indicate the device is armed 5. Blue appears at exposure times 6. Part number

WarmMark2 Features Easy to Read and Use Accuracy Field-armable The word ON appears when device armed Traceability Unique identifiers assist tracking Product is lot-traceable Accuracy Temperature accuracy of +1°C No false activations from human handling Quality Certificate of conformance with every shipment Heat-sealed to prevent bleeding Tamperproof Release documents available upon request

Standard WarmMark2 Sensitivities* Blister on Top (BOT) – Armed from the front of device. Allows smaller increments of time/temp exposure to be shown. Blister on Bottom (BOB) – Armed from the back of device. Allows for longer run-out times. *Based on isothermal temperature of 2°C above threshold temperature. Higher temperature exposure will speed run-out

How WarmMark2 Works Inactive: liquid in blister before arming Armed: blister squeezed, RED in arming window confirms product is armed Breach: after exposure to temperatures over the threshold temperature, blue dye will appear in the breach window for the time specified

ColdMark2 Features 1. Field-armable with button push 2. Unique identifier for enhanced shipment tracking 3. Indicates the device is armed 4. Turns red when exposed past threshold 5. Temperature sensitivity 6. Part number

ColdMark2 Features Easy to Read and Use Accuracy Field armable - requires no special packaging or overnight shipping Window on device shows it has been armed Traceability Unique identifiers assist tracking Product is lot-traceable Accuracy Temperature accuracy of +1°C Accurate response time Quality Certificate of conformance with every shipment Tamperproof Release documents available upon request

Available ColdMark2 Sensitivities Temperature Thresholds Activation Time 0°C / 32°F 60 minutes or less 1.5°C / 35°F 30 minutes or less

How ColdMark2 Works Inactive: liquid in blister before arming Armed: blister squeezed, RED in arming window confirms product is armed Breach: after exposure to temperatures below the threshold temperature, red dye will appear in the breach window

WarmMark and ColdMark Temperature Indicators

WarmMark & ColdMark Single-use temperature threshold indicators Identify out-of-tolerance temperature conditions Accurate & affordable WarmMark Short-Run WarmMark Long-Run ColdMark WarmMark Duo

WarmMark Overview Ascending time-temperature indicator alerts users of exposure to unacceptably high temperature conditions and the cumulative amount of time of the exposure. 1 3 1. Field-armable with pull tab 2. Temperature sensitivity 3. Black stripes show product armed 4. Breach windows turn red when exposure above the activation temperature occurs 4 2 WarmMark Short-Run 3 2 2 3 2 WarmMark Long-Run WarmMark Duo

WarmMark Short-Run Run Out Time Window 1 Window 2 Window 3 -18oC / 0oF Ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the exposure up to 8, 12, or 48 hours depending on the temperature sensitivity. WarmMarkTM SR Response Temp Run Out Time Window 1 Window 2 Window 3 -18oC / 0oF 2 hours 3 hours 12 hours 0oC / 32oF 48 hours 5oC / 41oF 30 minutes 8 hours 8oC / 46oF 10oC / 50oF 20oC / 68oF 25oC / 77oF 30oC /86oF 37oC / 99oF Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.

WarmMark Long-Run Run Out Time 10oC / 50oF 31oC / 88oF Line 1 12 hours Ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the exposure up to 7 days. WarmMarkTM LR Response Temp Run Out Time 10oC / 50oF 31oC / 88oF Line 1 12 hours Line 2 30 hours Line 3 60 hours (2.5 days) Line 4 110 hours Line 5 168 hours (7 days) (7 Days) Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.

WarmMark Duo Run Out Time 10oC / 50oF 34oC / 93oF Window 1 3 days Indicates the duration of temperature exposure at two different activation temperature levels. Monitor for longer excursions above 10°C and for brief excursions above 34°C WarmMarkTM Duo Response Temp Run Out Time 10oC / 50oF 34oC / 93oF Window 1 3 days ----- Window 2 8 days Window 3 14 days Window 4 Within 30 minutes Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.

ColdMark Overview Descending, single-use temperature indicator that provides accurate, irreversible evidence of a below-temperature deviation Turns from clear to violet when the temperature goes below a predetermined threshold Activated

ColdMark Sensitivities ColdMark is available for the following activation temperatures: -3°C/26°F 0°C/32°F 2°C/36°F 5°C/41°F 10°C/50°F

TrekView ® Temperature Recorders

TrekView Temperature Recorder Download data in a few seconds Connectivity: RF plus USB Activate tags, check temperatures without opening the package Visual indication of high / low temperature excursions for quick go / no-go decisions Footprint: size of a matchbook (minimizes package design considerations) Reusable for up to 26 on/off cycles Optional integrated probes for application-specific monitoring Optional handheld or desktop reader Unique Tag ID Number On/Off Button Status Button Low Excursion Display Window Active Display Window High Excursion Display Window * RF signals cannot read through metal packaging ** For handheld reader

TrekView USB External or internal USB options Provides access to temperature data without readers Fast data downloads using universal USB port on any PC Use this picture

TrekView Probe Units Stainless steel probe Ribbon probe Monitors core temperatures Ideal for food products Ribbon probe Used in validated pharmaceutical packaging Ideal for containers with metal components or large containers

TrekView DMS Overview Web-based application that assists in monitoring your cold chain 24/7 access to data from any internet-enabled device No software to install and little or no IT involvement required Analyze supply chain performance, create reports, and identify problem areas Simple menu structure for easy setup and configuration of recorders

TrekView DMS Overview Configure the TrekView temperature recorder settings in the easy-to-use TrekView Interface Application, and it is ready for use When shipment has reached the end of its journey, the TrekView recorder can be scanned in a matter of seconds and uploaded Detailed reports can be generated, but access to the information can be limited, ensuring that the information is seen by only those who need it

Security & Compliance FDA 21 CFR part 11 compliant, fully validated Data housed at a Tier 3 data center Password-protected User access levels limited by assigned roles

TrekView Desktop Software Intuitive interface for simplified tag configuration At-a-glance graphs and charts Detailed, customizable reports Quick identification of out of tolerance conditions

TrekView Readers Handheld Desktop Download data in seconds Open loop – USB Closed loop – reader, reader enables speed Handheld Desktop Download data in seconds No optical lens to clean or pins to align on readers

Target Where to Scan Mount the TrekView target label to match the location of the data recorders TrekView TrekView Scan here

Remote Monitoring Facilities and In Transport

Remote Monitoring Wireless temperature and humidity sensors for real-time monitoring in storage and in-transit Environmental data is collected from each sensor Data is transmitted to a centralized data repository Multiple frequencies available – WiFi, 900 MHz, 418 MHz

Portal – Reports

Portal – Graph

Portal – Transport

ShockWatch Cold Chain Services

Cold Chain Services Cold Chain Services Temperature Mapping Product Calibration Gap Analysis Cold Chain Services Shipping Studies Validation Services Services – goal is to become more consultative in the sales approach. Hardware sales follows when you have the confidence of the customer Package Design

For additional information email info@shockwatch. com or visit www For additional information email info@shockwatch.com or visit www.shockwatch.com