SQXF Instrumentation wires and connectors. Instrumentation & Quench heaters wires March 2014 J.C. Perez2 Instrumentation wires: AXON reference HH2619.

Slides:

Advertisements

Similar presentations

HV Cable Suitable to sustain up to 15 kV Cable characteristics: 1.According CERN safety instruction IS 23 2.Single conductor- = 0.16 mm 3.Conductor resistance.

Advertisements

Fessia Paolo, David Smekens and the whole TE-MSC-MDT section Insulation strategies and materials for incoming SC magnets.

DC electronics. Resistance Because electrons have mass and are held in place by polarity “bonds” – energy is consumed to dislodge electrons Resistance.

Parts list 1 – 8’ 2” OD stainless steel pipe, chamfered at both ends 1 –7’ 4” PVC pipe 2 – 4” PVC end caps, with appropriate holes 1 – heater (model#=Omegalux.

Current, Conductors and Insulators. Current Current: Current refers to electricity that moves through a circuit.

Coil working group video-meeting P. Ferracin, J. C. Perez, S. Izquierdo Bermudez, X. Sarasola February 4th, 2014.

TE-MPE –TM, 16/05/2013, Mateusz Bednarek, TE/MPE-EE ELQA testing during and beyond LS1.

TF Joint Voltage Drop Instrumentation Robert Marsala (609) Hans Schneider (609) Engineering Operations August 7, 2003 TF_JOINT_Final_Design_Review.ppt.

1 Hypertronics connectors at VMTF L series modular Hypertronics connectors in use at Fermilab/VMTF since fabrication of the LHC IR quadrupoles More than.

HQ TEST CERN by Marta Bajko CERN TE-MSC TF For Hi Lumi and LARP the 16 th of November 2011 CERN.

HQ02b : Test plan overview Test plan overview: Main elements and Open questions H. Bajas TE-MSC-TF H. BAJASUpdate meeting on HQ02b assembly and test plan02/05/2014.

Susana Izquierdo Bermudez. With many contributions from Juho Rysti, Gerard Willering and all the people involved in the manufacturing and test of the magnet.

Coil parts & Instrumentation issues for LQ/HQ coils tested at Fermilab HQ/LHQ coil parts task force.

Coil working group video-meeting P. Ferracin, J. C. Perez, S. Izquierdo Bermudez, X. Sarasola January 29, 2014.

1 QXF heater parameters G. Chlachidze, M. Marchevsky March 13, 2014.

Electrical Power Power is the rate at which work is done or energy is expended. –Unit is Watt = Joule / second –( James Watt worked on steam engines and.

Design Features: still to be determined and open questions P. Ferracin 4 th Joint HiLumi LHC-LARP Annual Meeting November 17-21, 2014 KEK, Tsukuba.

RPC (Barrel) Cabling summary. Signal cable specifications Signal Cables (two possibilities): –Loose pair round and twisted pairs (with flat zone for crimping.

Parts list 1 – 8’ 2” OD stainless steel pipe, chamfered at both ends 1 –7’ 4” PVC pipe 2 – 4” PVC end caps, with appropriate holes 1 – heater (model#=Omegalux.

Brookhaven - fermilab - berkeley US LHC ACCELERATOR PROJECT LHC IR Quad Heaters.

Support structure working group video- meeting P. Ferracin, D. Cheng, H. Felice, M. Juchno, J.C. Perez July 15th, 2014.

Eucard-WP7-HFM 9 th Collaboration Meeting at Warsaw University of Technology Status on SMC & RMC Models J.C Perez on behalf of SMC collaboration team.

HQ01e CERN test preparation update CERN Team: H. Bajas, M. Bajko, A. Chiuchiolo, G. Deferne, O. Dunkle, J. Feuvrier, P. Ferracin, L. Fiscarelli, F. Flamand,

Basic Electrical Circuit Materials Colts Neck High School Applied Technology.

Subscale quadrupole (SQ) series Paolo Ferracin LARP DoE Review FNAL June 12-14, 2006.

NCSX David Johnson August 18, 2004 Discussion of Co-Wound Flux Loops.

Test Program and Results Guram Chlachidze for FNAL-CERN Collaboration September 26-27, 2012 Outline Test program Quench Performance Quench Protection Magnetic.

BRUKER HTS tape measurement John Himbele, Arnaud Badel, Pascal Tixador 1.

Circuit Protection: Progress and Challenges at HL-LHC B. Auchmann (WP 7) on behalf of many people in WPs 3, 6, 7, 11 and Mr. Circuit.

A. BallarinoLASA, Milano,18/09/2012 High-Tc Superconducting Link Status of Task 7.5 FP7 Meeting at LASA-Milano A.Ballarino, CERN for the Task 7.5 Collaboration.

Electricity Lesson 2 Electrical Charge Carriers. A. A material in which electrical charges do not move freely from place to place is called a Insulator.

1 QXF / SQXF heater design update M. Marchevsky (12/03/13)

 The opposition of a material to the flow of charge through it.  Measured in ohms (  ).

Heat Flow Mockup - Status J. Rutherfoord 2 June 2014.

1 MQXF(S) Magnet Interface Document MQXF(S) magnet interface document will describe electrical connection between the magnet and the header assembly Scope.

Protection heater design for MQXF outer layer *Using long Super- Heating Stations for ensuring quenhces at low currents* Tiina Salmi, Tampere.

D. Arbelaez for the LBNL LCLS SCU team Mar. 3,

1 PST Heater Panel Design The PST heater panels are internally redundant resistive circuits printed onto a Kapton sheet with an aluminum backing. They.

Dan Cheng, Xiaorong Wang 12/15/2015 MQXFA Connectors Discussion Part II.

-1- Steve Virostek (LBNL) and Li Wang (SINAP) Instrumentation for the MICE Coupling Coil Steve Virostek Lawrence Berkeley National Lab February.

MQXFS01 instrumentation, Projecting towards MQXFA D. Cheng, S. Myers, H. Pan, X. Wang 10/14/20151.

Acknowledgements: This Research was sponsored by ONR Funds: N Study on the Electrical Performance and Aging of Polymer Insulation S. Grzybowski.

J.C. Perez, S. Izquierdo Bermudez 11T Dipole models instrumentation.

FNAL Workshop, July 19, 2007 ILC Main Linac Superconducting Quadrupole V.Kashikhin 1 ILC Main Linac Superconducting Quadrupole (ILC HGQ1) V. Kashikhin.

ECAL LED monitoring system upgrade status 04/09/20131.

Ranko Ostojic AT/MEL 1.Beam heat loads 2.Magnet design issues related to heat loads.

Superconducting Coils for Application

Superconductng cable for CBM magnet

Massimo Sorbi on behalf of INFN team:

MQY-30 Test Result Report

Coax cable for NFWS Technical requirement: Core: Copper

ESAC Review February 2013 CEA Saclay

Unit 3 Lesson 2 Electric Current

C. J. Kovacs, M. Majoros, M. D. Sumption, E. Collings

Protection of FCC 16 T dipoles

Heat shrink solder sleeving

Quench Protection Measurements & Analysis

CEA Nb3Sn quadrupole magnet : test results and future

The Quench Detection-Wire-Feedthrough Plug-In of W7-X

Natural Sciences and Technology Grade 6

Jeremy Weiss & Danko van der Laan Chul Kim & Sastry Pamidi

Hilumi WP3 meeting, 1 October 2014

Electrical Quality Control (QC): coil to coil parts

FRESCA Facility for the REception of Superconducting CAbles

Unit 3 Lesson 2 Electric Current

MQXFS1e – PH-to-Coil hipot tests

HL-LHC Long term behaviour of magnets Test facility limitations

Hi-pot results summary

Presentation transcript:

SQXF Instrumentation wires and connectors

Instrumentation & Quench heaters wires March 2014 J.C. Perez2 Instrumentation wires: AXON reference HH2619 LH Conductor diameter mm (0.15 mm 2 ) Conductor composition: Copper silver plated External wire diameter: 0.95 mm Wire insulation: polyimide tape wrapped (glued with a thin layer of fluoopolymer) Nominal voltage : 1000V AC Axon voltage test: (2*U N )+1000V= 3 kV Approx. price: 2220 €/km Quench heaters wires: AXON reference H 1619 L Conductor diameter 1.5 mm (1.34 mm 2 ) Conductor composition: Copper silver plated External wire diameter: 1.8 mm Wire insulation: polyimide tape wrapped (glued with a thin layer of fluoropolymer) Nominal voltage : 600V AC Axon voltage test: (2*U N )+1000V= 2.2 kV Approx. price: 4500 €/km

From Vladimir Ivanovich Datskov “Today I tested quench heater white wire with CLIQ pulse current at SM18. With CLIQ Cbox1 (C=28 mF) I did total 10 current pulses 387 A, 770 A and 1 kA via Q-heater wire 1 m long (R=12.9 mOhm). After 387 A pulse the wire temperature was not changed, only after 1 kA pulse the temperature was C.” March 2014 J.C. Perez3

SM18 cryostats connectors March 2014 J.C. Perez4 Burndy, 40 pins connectors for Vtaps and QH 3M, 40 pins connectors using twisted pairs of wires for strain gauges