1 Soft Phone Installation and Registration Step by Step Instructions By Prof. Valencia Community College
2 Installing Cisco IP Communicator
3 Network Requirements For Cisco IP Communicator to successfully operate as an endpoint in your network, your network must meet the following requirements: Voice over IP (VoIP) configured on your Cisco routers and gateways Cisco CallManager Release 3.3(3) SR 3 or higher installed in your network and configured to handle call processing If you want Cisco IP Communicator to auto-locate its TFTP server, you also need an IP network that supports DHCP with Cisco Option 150 configured with the address of your TFTP servers.
4 Client PC Requirements Windows 2000 Professional with service pack 3 or later Windows XP Professional with service pack 1 or later Minimum connection bandwidth of 128 Kbps
5 Configuring CIPC Set up manually if the PC where CIPC is installed was configured with a static IP Address The TFTP Server address is the same as your CallManager address
6 CIPC Registration Your CIPC will get a local Directory Number (LDN) Automatically just like your 7960 Phone when Auto-Registration is enabled.
7 Computer Telephony Integration (CTI) in Windows From the Control Panel….
8 Computer Telephony Integration (CTI) in Windows
9 Verifying the CIPC Registration Devices Phones Find Button CIPC gets a Local Directory Number Using Auto Registration Just like Cisco 7960 IP Phone
10 Manual Registration Option Devices Phones Add a New Phone
11 Adding a User
12 Assigning a Device to a User “Device Association” Scroll down and click on “update selected”
13 Confirm Association
14 Restarting the CIPC
15 Changing Internal Caller ID Scroll Up and Click Update You will have to restart the phone afterwards. From the same page click on “Reset Device”/
16 Installing CIPC Admin Tool on CallManager What the admin Tool Does for You.
17 Integrating Directories and Dialing Rules in CIPC Click Next then Choose Auto- Detect after verifying the values
18 Integrating Directories and Dialing Rules in CIPC