Safety Testers (plus more) from Dranetz and Gossen Metrawatt General Presentation

Introduction Dranetz partnered with Gossen Metrawatt presenting world renowned SAFETY TESTERS along with other highly regarded testers and meters. NOT Rebranded

Safety Testers Multifunction Electrical Safety Testers Insulation, Grounding, Low Ohm Testers Installation Testers

Electrical Safety Tester – What? Universal instrument for testing the electrical safety of portable electrical equipment in commercial and medical applications. When evaluating electrical safety, tests are performed for: – protective conductor connections –insulation resistance –leakage current

Electrical Safety Testing – Why? Human SAFETY !!! Liability

Multi-Function Safety Testers Secutest Series – over 50,000 sold The Standard for all other Safety Testers Proven – Rugged – Portable IEC testing High Voltage / Ground Bond / Leakage High Voltage Test up to 6kV Ground Bond Test with 200mA, 10A, 25A

Protective Earth Resistance Test

Protective Earth Leakage Test

Target Groups for EST Appliances Power Tools IT equipment Medical Devices –Medical, Optical, Dental, Veterinary Hospitals –Biomed –Clinical Engineering –Facilities Manufacturing Type Testing (R&D) Manufacturing Production Line Testing Service - after repair Field Service - PM

Applications for Electrical Safety Testers (EST) High Voltage Testing - HiPot – Insulation Protective Earth Leakage Ground Bond Testing Insulation Resistance Medical Device Applied Part Leakage Testing to meet International Standards Medical Devices to IEC & Electric Power Tools & Appliances Tests are guided by IEC Electrical Equipment for Measurement, Control and Laboratory Use to IEC Information Technologies Devices to IEC 60950

EST USP’s (Unique Selling Points) Menu driven test sequences 200mA, 10A and 25A Ground Bond testing 6KV HV testing 10+2 Applied part testing Data storage up to 125 tests RS232 interface PC software / automatic test reports 50,000 sold world-wide

Insulation Tester – What? An insulation tester can be used to determine the integrity of windings or cables in: –Motors, transformers, switchgear, and electrical installations. Insulation testers measure the insulation’s ability to resist the escape of an electrical current –high resistance indicates little loss of current –low resistance indicates a significant amount of current is leaking somewhere along the insulation

Insulation Testing – Why? Human SAFETY !!! Liability

Insulation Testers – Why? Insure public and personal safety Eliminate the possibility of having a life-threatening short circuit or short to ground Testing the system against miswired and defective equipment: –it will insures a high quality installation –customer satisfaction –protects against fire or shock.

Insulation Tester - Metriso G500, G1000 & G1000+ Battery powered, digital Insulation Resistance Testers Test Voltages 50V – 500V/1000V Power Supply with 8x AA batteries Voltage Measurement in any switch position Very low resistance measurement capability 10MΩ Calibration Terminals built-in Backlit LC Display

Insulation Testing

Target Groups for Insulation Testers R&D Type Testing Final Inspection Routine Testing Quality Control PM Manufacturing Motors / Generators Electrical Machines Appliances Consumer electronics Service contractors

Applications for Insulation Testers Insulation integrity of motors, generators, transformers, anything with electrical wiring Safe, efficient, loss-free operation Fire prevention Ascertain environmental and/or physical effects on electrical systems

Insulation Tester USP’s Compact, rugged and ideally suited for field use Cable length offset function Integrated 10Mohm test resistor Functional User Interface

Insulation Testers Other GMC-I Models Metriso 5000D Metriso 5000A Metriso C MetraHit ISO

Installation Tester – What? Tests all measurements for effectiveness of safety measures in electrical systems required by international standards. Assures the user his installation complies with all applicable regulations, and functions reliably.

Installation Testing – Why? Human SAFETY !!! Liability

Installation Tester – ProfiTest Master DKD Calibration Certificate standard CAT III 600V, CAT IV 300 V for industrial applications 4 Wire measurement => Automatic Measurement Cable Compensation => High accuracy => Best Instrument to ensure safe installation! User friendly handling and one hand operation Easy reading with large display Integrated memory of objects, free selection Electrical Testing Center PC Software RISO with rising test voltage 10 to 1000V Bidirectional data exchange with RS232 to USB

Other Testers MetraHit Energy Photovoltaic ProfiTest PV

MetraHit Energy Power and Energy Measurement Systematic Power Quality Analysis Harmonic Analysis User Safety and Overload Protection Memory Mode Operation

PROFITEST PV Peak power measuring instrument and curve tracer for PV modules and strings (measurement at capacitive load)

PROFITEST PV Measurement of characteristic I-U curve at PV modules and strings Generator voltage of up to 1000 V DC, current of up to 20 A DC Acquired characteristic I-U curve is highly accurate thanks to steady measurement at the capacitive load.

PROFITEST PV Automatic conversion of momentary measured values to STC Power and temperature measurement with four-wire measuring method for error-free results Measurement of : –short-circuit current ISC –open-circuit voltage UOC –instantaneous peak power of a solar cell Pmax –internal series resistance RS –internal parallel resistance RP