For PROLiNK TA8 Honeycomb 3.2 Upgrade Download Tool SOP For PROLiNK TA8 Honeycomb 3.2 Upgrade August 08, 2011 1
Tools and Software Required TA8 Android Tablet 01 x Micro USB cable 01 x Safety Pin (or pointed pin with 1mm diameter) 01 X PC (Win XP and above) Download Nvidia driver and Honeycomb 3.2 image from this link http://www.prolink.com.sg/download/nvidia_driver_hc3.2.zip
Boot-recovery Driver Installation Download the Duke Update Utilty and the firmware from the Download section of www.ekoore.com Install android_tegra_250_FroyoOV5650v1.msi , to your PC Double click the “android_tegra_250_FroyoOV5650v1.msi”
Boot-recovery Driver Install Click the “Next” to continue
Boot-recovery Driver Install Select “I accept the terms in the License Agreement” Click “Next” 1. 2.
Boot-recovery Driver Install Click the “Typical”
Boot-recovery Driver Install Click the “Install”
Boot-recovery Driver Install Click the “Finish”
Boot-recovery Driver Install After the installation, you can find the APX driver in C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1\usbpcdriver
Boot-recovery Driver Install Select and copy all the files under the Driver > Patch folder
Boot-recovery Driver Install Paste all the files to “C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1” folder Copy and Replace all the conflicts files
Boot-recovery Driver Install Power off the tablet Connect up the PC and tablet with the Micro USB cable Press the Recovery button with the safety pin + Power button at the same time for 3 secs and let go Check if there is an USB device named “!APX” detected on your PC device manager
Boot-recovery Driver Install Right click “!APX” and select “Update driver” > Browse my computer for driver software > C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1\usbpcdriver > Next
Boot-recovery Driver Install After installation, a USB device named “NVIDIA USB Boot-recovery driver for Mobile devices” would be found on your PC Device Manager
Outline Boot-recovery Driver Install Image Download
Image Download Power OFF the tablet Connect up the PC and tablet with the Micro USB cable Press the Recovery button with the safety pin + Power button at the same time for 3 secs and let go A USB device named “NVIDIA USB Boot-recovery driver for Mobile devices” would be found on your PC Device Manager
Image Download Open 0.J05401.00501GEN-enFR.110804.0 folder Double click on the “nvflash.bat”
Image Download Press any key to start the image download