The Metals Game By: Sam Hafner and Kyle Taylor

Arc WeldingLatheSheet MetalGas Welding Mill Mig Welding

Arc 100 Name one type of arc welder? A: Straight, Reverse, or Regular polarity

Arc 200 What is tack welding? A: Small little quick weld to hold your piece together

Arc 300 Name 2 different types of DC current? A: DC positive and DC negative

Arc 400 What is the chipping hammer used for? A: To chip the slag off of your weld

Arc 500 What is the lens shade if the current is ? A: 10

Lathe 100 What is Facing? A: Squaring the end of your piece

Lathe 200 What is Knurling? A: putting grip on your piece

Lathe 300 Explain 3 safety rules for the lathe? A: NO tie, NO loose clothing, ALWAYS pay attention

Lathe 400 What grit sandpaper makes your piece shinny and smooth? A: 240 grit

Lathe 500 What's center drilling? A: Drilling a hole in the center

Sheet Metal 100 What is sheet metal? A: flexible light metal

Sheet Metal 200 What is a scratch awl? A: A pointy piece used for scratching lines in the sheet metal

Sheet Metal 300 What is a hand seamer? A: used for bending the edges of sheet metal

Sheet Metal 400 What’s a sheet metal stake? A: used to bend sheet metal

Sheet Metal 500 What is the brake used for? A: Used for bending the corners of sheet metal

Gas Welding 100 What one important safety item when gas welding? A: Goggles

Gas Welding 200 What are the tip cleaners used for? A: Clean the inside of the torch

Gas Welding 300 What are the 3 different types of flames? A: Nuetral, oxidizing, Carburizing

Gas Welding 400 What's a flashback? A: When the flame is burning inside of the torch

Mill 100 What is the mill best used for? A: Taking off little layers of metal at a time

Gas Welding 500 What occurs when the torch gets to close to the metal? A: Popping

Mill 200 What should always be worn when operating the mill? A: Safety glasses

Mill 300 How do u take the mill bit out? A: chuck keys or Allen rench

Mill 400 What turns the mill on? A: the red button in the operator box

Mill 500 Name one project that can be made on the mill? A: Carpenter square, dice, hammer head, etc.

Mig Welding 100 Does the mig welder have the same qualities as the arc welder? A: no

Mig Welding 200 What is different between a arc weld and a mig weld? A: Arc welds have a stronger look to them and are made for more heavier welding