BCT 102 Residential Printreading Foundation Plans Basic Information Provided

Foundation Plan Basic Information Horizontal cut plane at 12", section cut location and direction All exterior dimensions “should be” measured from the foundation outside wall. Plan shows footing (hidden lines) and stem wall location. ( not relative to property lines) Shows interior footings, size and location: large load point, small pier pad, fireplace. Foundation vents, low point drain, crawl access Under floor beams (girders), beam pockets Floor joist/beam size, spacing and direction.

Typical Foundation Plan

Typical Basement Foundation Plan

Dimensions from outside stem wall Small pier pads Dimensions Brick Veneer Load Bearing Point Footing Air Vent Beam pockets Dimensions from outside stem wall

Dimensions from outside brick veneer? Floor joists Brick Veneer Dimensions from outside brick veneer?

Post & Beam Foundation vents Outside footing Beam pockets Foundation wall Inside footing Crawl Access

Footing size Footing pad spacing Fireplace footing Beam spacing Section cut

Drawing Notes Footing notes Steel reinforcing bar Dimensions Typical Means ?

Notes Slab / Fill & Steel Floor Joist Dimensions Foundation wall Footing Dimensions Foundation wall

Sheathing, girder, post, pier pad, wood to concrete barrier via notes

Mechanical Location AC WH Beam Pocket Footing Steel notes

Rough in Plumbing Beam size Joist direction

Page Information: Scale, Plus Drawing object Page 1 of 6 drawing scale