Engineering 1182 College of Engineering Engineering Education Innovation Center Extracting Drawings - DEMO Although most demos are implemented with word documents, this demo employs slides so that more details can be shown to the students as the drawing is constructed. Rev: , AJPExtracting Drawings1

Engineering 1182 Today’s Objectives Formal Drawing Components: –Exploded View –Extracted Drawings SW07 In-Class Activity SW07 Out-of-Class Homework Assignment

Engineering 1182 Formal Drawings Formal Drawing Components: Demo with Wind Turbine Assembly from SW-07 EEIC website 1.Extracted Drawings Explode View Bill of Materials Balloons Definition: First page of a Working Drawing Set – see SW_08

Engineering 1182 Formal Drawings Formal Drawing Components: 1.Extracted Drawings Extracted Views Dimensioned Features Title Block 2.Dimensions Size and Type of Features Rev: , AJPExtracting Drawings4 Definition: Detailed multi- view representations of a finished part

Engineering 1182 Extracted Views Rev: , AJPExtracting Drawings5 Purpose: create 2D engineering drawings from solid models Base ViewRight View Top View Isometric View Part File to Drawing File Place Base View Project Top, Right Isometric View

Engineering 1182 Rev: , AJPExtracting Drawings6 Detailed Features Automatically Aligned Features Hidden Lines Orthographic Views NOT on Isometric Views (unless necessary) Circular Features Centerlines Center Marks

Engineering 1182 Rev: , AJPExtracting Drawings7 Title Block Specific to Company Part Name Scale Units Author Date Any Other Necessary Information

Engineering 1182 The OSU Title Block Template Rev: , AJPExtracting Drawings8 Drawing Title Drawn By Scale Instructor Hour Units Seat Drawing No. Date TOP ORTHO FRONT ORTHO RIGHT SIDE ORTHO ISOMETRIC ISOMETRIC SCALE NOTE

Engineering 1182 Load Files from SolidWork-7 EEIC website Extracting Drawings9 Place the following files in your SolidWorks folder: Extracting_Drawing_Demo_Part.SLDPRT Extracting_Drawing_Demo_Drawing.SLDDRW The following slides are intended to be used as an Instructor led demonstration with the students replicating the shown operations. Note that the drawing created in this Demo will be used in the following Dimensioning Demo. Rev: RCB

Engineering 1182 SolidWorks: Drawing File Extracting Drawings10 Select the correct part file from open documents or using the “Browse..” button to select closed files Open the Extracting_Drawing_Demo_ Drawing.SLDDRW and use the “Model View” button to place a base view. Extracting_Drawing_Demo_Part Rev: RCB

Engineering 1182 SolidWorks: Model View Options Extracting Drawings11 Choose base view (usually front view) Rev: RCB Display hidden lines for orthographic views Select "Use custom scale" and choose appropriate scale (1:2 for this demo)

Engineering 1182 SolidWorks: Extracted Views Extracting Drawings12 Insert base view by left clicking once at the correct location Place projected views by left clicking in the appropriate directions and spacing Press “Esc” when finished Rev: RCB

Engineering 1182 SolidWorks: Changing Options Extracting Drawings13Rev: RCB The size of all the views can be changed by selecting the base view and changing the scale A scale note can be added using Annotation and A Note The isometric view can be selected in order to change it’s display properties to a solid part without edge lines

Engineering 1182 SolidWorks: Circular Features Extracting Drawings14Rev: RCB The current version of SolidWorks adds Center Marks automatically. If additional Center Marks are required, they can be added using the Center Mark option Centerlines must be added to define circular features in Orthographic views by sequentially clicking on the vertical hidden lines defining the holes. Grab existing Center Marks to create an extended Center Line

Engineering 1182 Sometimes SolidWorks does not do Centerlines very well! Extracting Drawings15 Click on Centerline Left click on blue square and pull it down Adjust blue square up release Rev: RCB

Engineering 1182 Extracting Drawings16 SolidWorks: Title Block Right click ON Sheet Format1 (or anywhere on the drawing) and select “Edit Sheet Format” Rev: RCB Right click and select Edit Sheet or left click on icon in upper right screen to restore the drawing Double click item to edit Title Block Text Click on the RED X to accept the text and hit Esc key. Complete all blocks. Finished Drawing

Engineering 1182 Save the Extracted Part Drawing for use within the following Dimensioning Demo Rev: , AJPExtracting Drawings17 If the student has successfully completed the Extracting Demo, use File Save As and name the file: My_Dimensioning_Demo_Drawing* If the Extraction Demo drawing is incomplete, a completed version is available within the Dimensioning Demo on the SW_06 page on the EEIC website. (Dimensioning_Drawing_Demo_Drawing.S LDDRW). * Note that the completed extraction may be optionally submitted as the in-class assignment.

Engineering 1182 Extracting Drawings Wrap Up Extracted Views Part file to drawing file Detailed Features Aligned Hidden Circular Title Block Author Units Scale Rev: , AJPExtracting Drawings18 Homework Assignment Problem 6.4 (qq) Model part and create 2D Drawings with all necessary formatting (to be used in next class)

Engineering 1182 In-Class Assignment Rev: , AJPExtracting Drawings19 Open this part file and use it to extract 2D drawings. Add all necessary formatting. (Hint: Centermarks and Centerlines) Open this part file and use it to extract 2D drawings. Add all necessary formatting. (Hint: Centermarks and Centerlines)

Engineering 1182 End of Presentation Rev: RCBExtracting Drawings20 The following slide provides an alternative method for retrieving the correct OSU drawing template. The recommended method is to download the Drawing_Template.SLDDRW from the SolidWorks-6 EEIC website page as illustrated on slide 6.

Engineering 1182 SolidWorks: OSU Title Block Rev: , AJPExtracting Drawings21 The OSU Title Block is already loaded on the First Year Engineering Computers and is the same as what is in the EEIC Templates folder on the course drive To locate uncheck the “Only show standard formats” box and scroll to the bottom of the list