Sumitomo Electric Europe SUMITOMO ELECTRIC Sumitomo Electric Europe Limited SUMITOMO ELECTRIC T-201VS Handheld Splicer Vers 1.0Sumitomo Electric © 20131

SUMITOMO ELECTRIC V groove splicer evolution Vers 1.0Sumitomo Electric © Lighter… By more than a half Smaller… By more than a half Easier… LCD nearly double the size The latest developments from 30 years’ experience

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Easy operation On board training videos Touch screen For easy menu navigation on large 3.5” screen Auto Arc Calibration

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Perfect for field use Truly a handheld splicer - Dimensions: 110(w) x 140(d) x 76(h)mm - Weight: 0.63kg excluding battery Removable battery - Continue working whilst battery is charging. Either with additional battery or AC/DC adapter.

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Battery Charge Independent battery charger - Capable of charging 2 batteries at a time - Included in standard kit 2 versions of Li-ion battery - High capacity BU12L 100 splice/oven cycles* - Lightweight BU12S 130g ** *BU12L 230g 100 splice/oven cycles **BU12S 145g 30 splice/oven cycles

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Automated operation Automatic Start Automatic Arc Compensation Automatic oven 

SUMITOMO ELECTRIC Sprung loaded clamp keeps fibre straight during oven process - Prevents macro bends Vers 1.0Sumitomo Electric © Oven clamps 1. Place right hand fibre right hand clamp 2. Pull left hand fibre until right hand clamp moves across 3. Lower left hand fibre into right hand clamp

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Security PIN entry security can be enabled and used to disable the splicer: -Avoid unauthorised use. -Less attractive to thieves

SUMITOMO ELECTRIC Zoom enables closer inspection of fibre and/or fibre offset: –Normal x72 magnification –Zoom x216 Vers 1.0Sumitomo Electric © Splice analysing tools Normal viewZoom view

SUMITOMO ELECTRIC Splice image storage - Internal Memory - Micro SD Vers 1.0Sumitomo Electric © Splice analysing tools cont’d

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Protection from the environment - Dust proof to IP5x - Water resistance to IPx2 - 76cm Drop tested

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Maintenance On board proactive maintenance training videos Mirror less to reduce maintenance No tools required for Electrode replacement

SUMITOMO ELECTRIC Use your PC and the FSMA to: Enable splicer setting to be shared with Sumitomo View Splicer display on the PC screen Update Fusion Splicer software Amend splicer settings via a PC View/download splice data from the splicer. View splicer error log. View/download splice images on a PC. Vers 1.0Sumitomo Electric © Fusion Splicer Maintenance Application Software Application for connecting your T-201 to a PC

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Online Support Fusion Splicer Internet Support System (FSISS) -Software upgrades -Future potential to offer remote fault diagnosis. Fusion splicer Maintenance Centre Send Status Update Software Maintenance Application Maintenance Website (Data Centre) Remotely monitor status

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Data retrieval Connect to PC via USB 2 mini B - FSMA - FSISS Micro SD or SDHC card reader: - Portable storage of data and splice images - Up to 32Gb

SUMITOMO ELECTRIC Small soft case makes for easy carrying Vers 1.0Sumitomo Electric © Practical soft case

SUMITOMO ELECTRIC Cooling tray* Vers 1.0Sumitomo Electric © Accessories V groove brush* 3 hole Jacket remover Large range of fibre holders * Supplied in standard kit

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Specification T-201VST-201M4 Fibre Types splicedSMF ITU-T G652, MMF G651, DSF G653, NZDSF G655 & G656 and BIF G657 MEAN INSERTION LOSS*SM 0.05dB, mm 0.03dB, DS 0.08dB, NZ 0.08 dB Coating diameterFHS um FHS um tight buffer FHS-025LB5 250um or 900um Loose Buffer FHD-1 drop cable holder T-201VS holders plus: FHM-2 2 core ribbon fibre FHM-4 4 core ribbon fibre Splice time12 seconds12seconds single fibre 14seconds 4 core ribbon fibre Heat shrink time**40mm sleeve <35secsFPS-5 ribbon sleeve 40secs Splice & Oven Programs200 splice & 100 oven programs. All non-AUTO programs are editable Electrode Life3000 arcs1500 arcs Splice image storage10000 splicers & 64 images without SD card fitted Operating conditions-10°C to 50°C, <95%non-condensing humidity, max. 3660m, max. 15m/s wind Storage conditions-40°C to 80°C, <95%non-condensing humidity, not including battery * SPLICING NOTE: Insertion loss is for break and remake of identical Sumitomo fibres ** OVEN TIME NOTE:. At 20~25 °C ambient temperature with splicer powered from ADC-1340 adaptor.

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Lynx fusion splice on connectors Compatible with Sumitomo single fibre Lynx fusion splice on connector * Providing field termination of SC, LC, ST and FC in minutes -Reliable field termination without: Epoxy, field polishing and matching gel -Saving space over pigtails no need for additional splice storage *excludes Lynx mini

SUMITOMO ELECTRIC Vers 1.0Sumitomo Electric © Sumitomo fusion splicer range T-71C: Single fibre core alignment T-71M12: 12 fibre ribbon splicer T-201VS: Single fibre fixed V groove T-201M4: 4 fibre ribbon splicer