ActEyes IP Cam Training Part 2: Basic Camera Features

Camera Features Overview Pan & Tilt control Pan & Tilt control Speed control Speed control 16 customizable camera position settings 16 customizable camera position settings Rotation control Rotation control 3 customizable video pre-sets 3 customizable video pre-sets Still image capture Still image capture Streaming Audio / Video capture Streaming Audio / Video capture Mute control Mute control

Pan & Tilt Controls Each click of the directional buttons will move the camera a certain amount. Each click of the directional buttons will move the camera a certain amount. You can increase or decrease this amount by adjusting the speed setting using the (+) or (-) buttons. You can increase or decrease this amount by adjusting the speed setting using the (+) or (-) buttons. The center circular button returns the camera to its default power on position. The center circular button returns the camera to its default power on position. Note: if the camera is not mounted on a ceiling the movement controls will all be reversed regardless of the rotation of the image.

Camera Rotation Control The rotation button allows for correct viewing of the image regardless of whether the camera is mounted on a ceiling or table. The rotation button allows for correct viewing of the image regardless of whether the camera is mounted on a ceiling or table. The rotation button will not affect the direction of the pan & tilt no will it change he orientation of the still images and video recording. The rotation button will not affect the direction of the pan & tilt no will it change he orientation of the still images and video recording.

Customizable Position Settings The camera can remember up to 16 user defined positions. The camera can remember up to 16 user defined positions. To assign one of these positions: To assign one of these positions: – click (Set) – click any position number – click (Set) again – the position should now be set To test the camera, move the view to a new location then press the preset button. To test the camera, move the view to a new location then press the preset button. These position buttons can be used to program more advanced features later. These position buttons can be used to program more advanced features later. The “Auto” button will move the camera though all presets one-by-one. The “Auto” button will move the camera though all presets one-by-one.

Customizable Video presets The (S), (M), and (L) buttons are used to switch between the 3 custom video quality settings. The (S), (M), and (L) buttons are used to switch between the 3 custom video quality settings. – (L) is for high bandwidth broadcasts – (M) is for lower bandwidth broadcasts – (S) is for mobile broadcasting The bandwidth, frame rate, and other video quality settings can be adjusted in the video streaming options. The bandwidth, frame rate, and other video quality settings can be adjusted in the video streaming options. Note: Changing the video size using these buttons will not affect the video capture or still image capture quality.

Still Image Capture Still images can be captured directly from the cameras optics to a computer that is connected to the cameras web interface. Still images can be captured directly from the cameras optics to a computer that is connected to the cameras web interface. This can be done simply by clicking the camera button on the web interface once. This can be done simply by clicking the camera button on the web interface once. You can select the location you would like the images to be saved to using the folder button. You can select the location you would like the images to be saved to using the folder button. The quality and resolution of the image can be adjusted using the video streaming options which is discussed in the advanced features section. The quality and resolution of the image can be adjusted using the video streaming options which is discussed in the advanced features section.

Streaming Video Capture Streaming video can be captured directly from the cameras optics to a PC. Streaming video can be captured directly from the cameras optics to a PC. Simply click the video camera button once to start capture. Then click the video camera button again to end the capture. Simply click the video camera button once to start capture. Then click the video camera button again to end the capture. All captured video is saved onto the hard drive at the location defined in the folder button option. All captured video is saved onto the hard drive at the location defined in the folder button option. All video is saved using the.AVI file type and encoded using MPEG4 compression. All video is saved using the.AVI file type and encoded using MPEG4 compression. Note: You may need to install the provided audio/video codec on your PC to properly view the saved videos.

Capture Toolbar Demonstration