Connecting to Secure Wi-Fi in QSB Boardroom Locations 01 September 2013

Windows 7 - Check Wi-Fi Connections This set-up applies to the secure Wi-Fi connection at the Queen’s School of Business boardroom locations only. Check you are able to see the wireless connection Take note of the network name: – Queensu_MBA_WPA2 – Queensu_TOR_WPA2 Do Not attempt to connect to the network

Windows 7 – Control Panel Open Start menu – Click on the Control Panel to open it

Windows 7 – Control Panel In Control Panel, select View Network Status and Tasks If you do not see this view, change the View by: to Category view

Windows 7 – Wireless Network Select Set up a new connection or network

Windows 7 – Manually Config Network Select Manually connect to a wireless network Click Next

Windows 7 – Manually Config Network Enter the Network Name that you observed on page 1 – Queensu_MBA_WPA2 – Queensu_Tor_WPA2 Change Security type: WPA2-Enterprise Change Encryption type: AES Select Start this connection automatically Click the Next button

Windows 7 – Manually Config Network Click Change connection settings

Windows 7 – Wireless Network Properties On the Connection tab: Select Connect automatically when this network is in range De-select all other options Select Security tab

Windows 7 – Wireless Network Properties On the Security tab Change Security type: WPA2-Enterprise Change Encryption Type: AES Change Choose a network authentication method Choosing the default Microsoft: Protected (PEAP) will not work – Cisco (PEAP) Select Settings

Windows 7 – PEAP Properties On the Connection Tab De-select Use anonymous outer identity: De-select Validate server certificate Select Enable Fast Reconnect Select User Credentials tab

Windows 7 – PEAP Properties On the User Credentials tab Select Use saved username and password Enter your NetID in to the Username field Enter your NetID password in to the Password and Confirm Password fields Click OK button

Windows 7 – Wireless Network Properties On the Security Tab Select Remember my credentials … if you do not want to enter your NetID every time you use this wireless connection Select Advanced settings

Windows 7 – Advanced Settings De-select Specify authentication mode: De-select Enable single sign on for this network Select the settings tab

Windows 7 – Advanced Settings On the settings tab Select Enable Pairwise Master Key (PMK)caching – PMK time to live = 720 – Number of entries = 128 De-select the other values Click the OK button

Windows 7 – Wireless Network Properties On the Security tab Click the OK button

Windows 7 – Manually Config Network Click the Close button

Windows 7 - Connecting From the System Tray click the wireless icon Select the WPA2 wireless network Queensu_MBA_WPA2 Click the Connect button. Be patient, it may take a few minutes for the connection to complete this first time.

Windows 7 - Connecting Select Public Network

Windows 7 - Connecting You are now connected to the WPA2 network Click the Close button You do not need to disconnect from this network before leaving the facility. If you saved your user name and password this connection should automatically connect the next time you are in the facility.