Counter EMF (also known as Back EMF) When the current through an inductor changes, the magnetic field also changes. This changing magnetic field causes.

Slides:



Advertisements
Similar presentations
Counter EMF (also known as Back EMF)
Advertisements

CHAPTER 5: TRANSFORMER AND MUTUAL INDUCTANCE
Energy Storage Devices
CHAPTER 32 inductance 32.1 Self-Inductance 32.3 Energy in a Magnetic Field.
Inductors and Inductance A capacitor can be used to produce a desired electric field. Similarly, an inductor (symbol ) can be used to produce a desired.
First Order Circuit Capacitors and inductors RC and RL circuits.
Chapter 12 Electromagnetic Induction Permission granted to reproduce for educational use only. © Goodheart-Willcox Co., Inc. Objectives  Demonstrate.
Lesson 14 – Capacitors & Inductors. Learning Objectives Define capacitance and state its symbol and unit of measurement. Predict the capacitance of a.
Copyright © 2009 Pearson Education, Inc. Lecture 9 – Electromagnetic Induction.
ECE 201 Circuit Theory I1 Physical Characteristics of Inductors.
AHBMH DEE2113 : Chapter 5 - Transformer & Mutual Inductance 1 CHAPTER 5: TRANSFORMER AND MUTUAL INDUCTANCE Review of Magnetic Induction Mutual Inductance.
1 Electronics Inductance Copyright © Texas Education Agency, All rights reserved.
Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 14.1 Inductance and Magnetic Fields  Introduction  Electromagnetism  Reluctance.
Inductor.
CHAPTER 6INDUCTORS & INDUCTANCE & INDUCTANCE End of the lessons, students should be able to ; Understand inductors and inductance types of inductors.
Ch. 30 Inductance AP Physics. Mutual Inductance According to Faraday’s law, an emf is induced in a stationary circuit whenever the magnetic flux varies.
Inductors Chap 11.
Chapter 11 – Inductors Introductory Circuit Analysis Robert L. Boylestad.
Inductance and Inductors
Chapter 29 Electromagnetic Induction and Faraday’s Law
1 DC ELECTRICAL CIRCUITS INDUCTANCE. 2 DC ELECTRICAL CIRCUITS When current travels down a conductor it creates a magnetic field around the conductor,
-Self Inductance -Inductance of a Solenoid -RL Circuit -Energy Stored in an Inductor AP Physics C Mrs. Coyle.
Inductance Self-Inductance A
AP Physics C Montwood High School R. Casao
C H A P T E R   22 Electromagnetic Induction.
CHAPTER 6: TRANSFORMER BAKISS HIYANA ABU BAKAR
Basic Electronics Ninth Edition Basic Electronics Ninth Edition ©2002 The McGraw-Hill Companies Grob Schultz.
electronics fundamentals
Chapter 30 Inductance. Self Inductance When a time dependent current passes through a coil, a changing magnetic flux is produced inside the coil and this.
Unit 14 Magnetic Induction. Objectives: Discuss magnetic induction. List factors that determine the amount and polarity of an induced voltage. Discuss.
Chapter 10 Inductance. 2 Objectives –After completing this chapter, the student should be able to: Explain the principles of inductance. Identify the.
Electromagnetic Induction
Introduction to Electromechanical Energy Conversion
Chapter 13 Principles of Electric Circuits, Conventional Flow, 9 th ed. Floyd © 2010 Pearson Higher Education, Upper Saddle River, NJ All Rights.
Chapter 22: Electromagnetic Induction Essential Concepts and Summary.
Chapter 32 Inductance L and the stored magnetic energy RL and LC circuits RLC circuit.
DC/AC Fundamentals: A Systems Approach
Intro to AC. AC Alternating Current Flows in two directions. It can reverse many times per second. Intro to AC.
When the switch is closed, the current does not immediately reach its maximum value Faraday’s law can be used to describe the effect As the source current.
Chapter 29 Electromagnetic Induction and Faraday’s Law
Inductors An inductor is essentially a coil of wire with an iron core.
Chapter 32 Inductance. Self-inductance Some terminology first: Use emf and current when they are caused by batteries or other sources Use induced emf.
Chapter 13 Principles of Electric Circuits, Conventional Flow, 9 th ed. Floyd © 2010 Pearson Higher Education, Upper Saddle River, NJ All Rights.
Today Course overview and information 09/16/2010 © 2010 NTUST.
Copyright © 2009 Pearson Education, Inc. Chapter 32: Inductance, Electromagnetic Oscillations, and AC Circuits.
Counter EMF (also known as Back EMF) When the current through an inductor changes, the magnetic field also changes. This changing magnetic field causes.
Chapter 30 Lecture 31: Faraday’s Law and Induction: II HW 10 (problems): 29.15, 29.36, 29.48, 29.54, 30.14, 30.34, 30.42, Due Friday, Dec. 4.
Copyright © 2012 Pearson Education Inc. PowerPoint ® Lectures for University Physics, Thirteenth Edition – Hugh D. Young and Roger A. Freedman Lectures.
MAGNETIC CIRCUITS Electrical current flowing along a wire creates a magnetic field around the wire, as shown in Fig. That magnetic field can be visualized.
An inductor is a wire coil usually wrapped around an iron core
Inductors ? circuit diagram symbol.
Copyright © 2009 Pearson Education, Inc. Chapter 30 Inductance, Electromagnetic Oscillations, and AC Circuits HW8: Chapter 28:18,31,40 Chapter 29:3, 30,48.
Chapter 21 Magnetic Induction and Chapter 22.9: Transformers.
Chapter 11 Electronics Fundamentals Circuits, Devices and Applications - Floyd © Copyright 2007 Prentice-Hall Chapter 11.
Electronics Technology Fundamentals Chapter 10 Inductors.
Lesson 11: Capacitors (Chapter 10) and Inductors (Chapter 11)
MAGNETICALLY COUPLED CIRCUIT
14.1 Introduction Earlier we noted that capacitors store energy by producing an electric field within a piece of dielectric material Inductors also store.
Warm-up Why do loops of wire in a motor rotate?
Current flowing out Current flowing in 14-1
11/13/2018.
Electric Circuits Fundamentals
UNIT 2 Magnetic Circuits
Chapter 32 Inductance 32-1 Self-Inductance 32-3 Energy of a Magnetic Field.
19 Inductance Chapter Topics Covered in Chapter 19
Chapter 32 Inductance 32-1 Self-Inductance 32-3 Energy of a Magnetic Field.
Chapter 32 Inductance 32-1 Self-Inductance 32-3 Energy of a Magnetic Field.
INDUCTORS, CAPACITORS AND ALTERNATING CURRENT
ElectroMagnetic Induction
MAGNETICALLY COUPLED CIRCUIT
Presentation transcript:

Counter EMF (also known as Back EMF) When the current through an inductor changes, the magnetic field also changes. This changing magnetic field causes there to be an induced voltage across the terminals of the inductor. This induced voltage’s polarity is in a direction opposite to that of the original voltage applied. This is basically Lenz’s law in a nutshell.

Current through inductors in a DC circuit when switch closes

What do you think voltage across an inductor looks like in a DC circuit when the switch is closed?

Voltage through inductors in a DC circuit when switch closes Inductance has it greatest effect only when there is a change in current.

What would happen in this circuit?

Inductance Summary Inductors react against changes in current by dropping voltage in a polarity necessary to oppose the change When an inductor is faced with an increasing current, it acts as a load, by dropping voltage. (series opposing) When an inductor is faced with a decreasing current, it acts as a source, by dropping voltage. (series aiding) The ability of an inductor to store energy in the form of a magnetic field (and consequently opposing changes in current) is called inductance. The unit of inductance is the Henry – H (Denoted as the letter L on a schematic)

Random Video of the Day

Inductor Schematic Symbol Typically, the range of inductors are from micro-Henry’s to milli-Henry’s (  H to mH)

In the picture of the inductor below, since current takes the path of least resistance, why wouldn’t the current just bypass all the turning and jump straight across the tops of all the coils? Because there is a clear enamel coating on the wires that acts like an insulator

18.3 Inductance Factors Affecting Coil Inductance

The design of the inductor is most important in determining the value of inductance. 1. The amount of turns in creating the coil affect how much voltage can be linked between the turns. In a later equation, this figure is denoted by (N). N

Coil Inductance Factors (cont.) 2. The diameter of the coil affects inductance. A larger diameter core results in more magnetic lines of force than compared to a smaller diameter coil. Denoted by (A) for area=πr 2. r A

Coil Inductance Factors (cont.) 3. As the length (l) of the inductor grows, the distance between turns increases, which causes the magnetic field to get weaker. Denoted by l, for length in meters, not I for current! l l

Coil Inductance Factors (cont.) 4. And finally, inductance is affected by the core material in which the coil is wrapped around. Higher permeability enables more flux to form. More flux means more inductance. This is denoted by (µ) pronounced “mju”, not known as micro in this case. Table 16.2 from book Material Permeability, µ (H/m) Relative Permeability, µ r (No Units) Air or Vacuum1.26 x Nickel6.28 x Cobalt7.56 x Cast Iron1.1 x Machine Steel5.65 x Transformer iron core6.9 x Silicon Iron8.8 x Permalloy ,000 Supermalloy1.26 1,000,000 µ

Inductance equation L= µN 2 A l L= Inductance in Henrys, H µ=permeability of core, µ 0 µ r µ 0 = 1.26 x (The absolute permeability of air) µ r = relative permeability of core material, refer to Table 16.2  N= number of coil turns A= area of cross-section of coil wire, πr 2. l= length of core material (m) Table 16.2 from book Material Permeability, µ (H/m) Relative Permeability, µ r (No Units) Air or Vacuum1.26 x Nickel6.28 x Cobalt7.56 x Cast Iron1.1 x Machine Steel5.65 x Transformer iron core6.9 x Silicon Iron8.8 x Permalloy ,000 Supermalloy1.26 1,000,000

Inductance problem worked out Given: l=10cm r=1.5cm N=200 turns l=.1m r=.015m N=200 turns It’s an air core that we’re dealing with. So relative permeability is µ r =1. L= µN 2 A l L= (µ 0 µ r ) (200) 2 [π( )].1 L= [(1.26 x )(1)] (40000) ( ).1 L= L= H or µH

Another Inductance problem! Given: l=15cm r=.02m N=500 turns Machine Steel Core Find Inductance Value

Another Inductance problem! Given: l = 15cm r =.02m L = 3mH Nickel Core Find the number of turns

Measuring the induced voltage across an inductor Equation 18.1: This equation says that the higher the change in current, and the faster that change occurs, the higher the voltage across the inductor will be.

How much self-induced voltage occurs across a 4H inductor when the current going through it changes by 10Amps in 1 second?

How much self-induced voltage occurs across a 4mH inductor when the current going through it changes by 10Amps in 1ms? = 400V 1ms)

Calculating total inductance L T What is the total inductance of this circuit? 62H Calculating the total inductance in a circuit is done the same way as calculating the total resistance

Calculating total inductance L T What is the total inductance of this circuit? 6H Calculating the total inductance in a circuit is done the same way as calculating the total resistance

Calculating total inductance L T What is the total inductance of this circuit? L T = 15H Calculating the total inductance in a circuit is done the same way as calculating the total resistance

However! There is a subtle difference in calculating L T that you don’t have to consider when calculating R T What if the magnetic field from one inductor interferes with the magnetic field from the inductor next to it? In other words, if the magnetic field from one inductor cuts the across the coils of the inductor located physically next to it, then extra inductance will be introduced, (or some inductance will be cancelled out.) THIS IS CALLED MUTUAL INDUCTANCE

MUTUAL INDUCTANCE

Mutual Inductance

Calculating total inductance if there is mutual inductance involved In the circuit above, if the inductor’s magnetic fields didn’t interfere with each other, aka have no mutual inductance, then the total inductance is just 13H. However, suppose the inductors magnetic fields were completely overlapping each other, then we would have to consider this.

k is the coefficient of coupling and it is a number ranging from 0% to 100% If the coils of 2 inductors were wrapped around each other, then the magnetic fields of each have no choice but to couple themselves to the other inductor. In this case the coefficient of coupling, k, is 100%. If the inductors’ magnetic fields are not coupled, then k = 0.

MUTUAL INDUCTANCE k =.9 k =.3 k = 0

Calculating total inductance if there is mutual inductance involved Suppose the inductors were connected in a series aiding arrangement with a coefficient of coupling of 90%.

Calculating total inductance if there is mutual inductance involved Suppose the inductors were connected in a series opposing arrangement with a coefficient of coupling of 90%.

2 coils have inductances of 8mH and 4.7mH. If the coefficient of coupling between them is.82, what is the mutual inductance? L T = 8mH mH mH = 17.73mH (If in series aiding arrangement) L T = 8mH mH mH = 7.67mH (If in series opposing arrangement)

Types of Inductors Put table from lecture notes here

Stray Inductance Talk about stray inductance

Go over Cap/Inductor HandoutHandout