Scorpion BP

Remote Access Water- Coupled Crawler System

Scorpion BP Non-encoded, water coupled crawler designed to be: Cost effective Simple to set up and use Compatible with any UT set

Scorpion BP Adds remote access thickness measurement capability to existing UT equipment

Scorpion BP Traditional Irrigated Probe Uses water as a couplant 5MHz twin crystal transducer 2.5mm near surface resolution

Scorpion BP Simple pressure based water- feed system supplies a thin film of water over transducer face

Scorpion BP The water reservoir is pressurised using a manual air pump Water output is adjusted so a thin film forms over the transducer face

Scorpion BP No complicated / wasteful pump systems required A full vertical line scan on a 30M tank shell uses only 7litres of water No power supply required

Scorpion BP Simple to setup Easy to use

Scorpion BP Compatible with any UT set UT set connects to Control Module via standard BNC connectors

Scorpion BP Neodymium belly magnets & wheel magnets 13.6KG pull-off force

Scorpion BP Powered by 12V battery Pack Ruggedized for site use Provides 8 hours continuous operation Audible low voltage alarm

Scorpion BP Four independently controlled drive-wheels provide full steering control

Scorpion BP Cost effective Simple to set up and use Minimal training required Minimal water use 30M maximum height

TECHNOLOGY DRIVEN

NOT OPERATOR DEPENDENT