Made in United States of America EMIT SIM emit.descoindustries.com Rev:

Made in United States of America  EMIT SIM (Smart Ionization & Monitoring) is software designed to monitor and record the activity of EMIT’s line of Smart Products  This list of products includes:  Zero Volt Ionizer(Bench Top and Overhead)  Zero Volt Monitor(Dual Operator and Workstation)  Zero Volt Monitor Solo(Single Operator and Workstation)  Dual Programmable Monitor  Ultra Low Voltage Monitor  EMIT SIM uses serial number tracking to manage re-calibration schedules for each device  All monitoring is done via a 2 wire serial RS-485 daisy-chained bus. Total cable length of each loop must be less than 1,200 meters (~4,000 feet).  Supported Operating Systems: Windows XP, Windows Vista, Windows 7 (32-bit and 64-bit) What is EMIT SIM? EMIT SIM emit.descoindustries.com

Made in United States of America  Unsupervised Reliability  Ionizers and monitors sometimes have alarms which may go unnoticed by the line of workers  EMIT SIM will record and display failures to notify supervisors or engineers when a device needs attention  Eliminates the need to rely on people to physically check the devices every day  Quickly Identify Failure Types  All alarms and exceptions are automatically recorded  Use the logs stored in EMIT SIM to identify any exceptional events that occurred during the assembly of a failed product  Manage Calibration and Maintenance Schedules  Customize your maintenance schedule to automatically display notification when any one group of devices need calibration or maintenance Why EMIT SIM? EMIT SIM emit.descoindustries.com “Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements.” (ANSI/ESD S section 7.3)

Made in United States of America EMIT SIM emit.descoindustries.com  EMIT SIM polls and records the status of all EMIT smart devices via RS-485 technology  Use the “Current Fault” filter to display when failures occur at a workstation  Track the device type, its operator and location, type of failure, date, time and duration Poll and Record Device Activity

Made in United States of America EMIT SIM emit.descoindustries.com  Click the device buttons to see device-specific poll data  Device poll screens display the current status of the selected device type (PASS, FAIL, NOT CONNECTED)

Made in United States of America  Generate reports that list device details and their pass / fail activity  Filter reports by device type, date range and ‘fault only’ data  Reports display event duration, allowing users to quickly identify and address problem areas  Reports can be output in Excel, Word, and PDF formats EMIT SIM emit.descoindustries.com Report Generator

Made in United States of America  Manually or automatically archive data  Auto Archive your data by date or file size  Schedule archives daily, weekly or monthly EMIT SIM emit.descoindustries.com Data Archive

Made in United States of America EMIT SIM emit.descoindustries.com  Use the Calibration Log to manage device serial numbers and their calibration dates  EMIT SIM periodically checks all calibration dates to determine if the device is due for re-calibration  Set calibration frequency settings for each device type (1 -12 months)  EMIT SIM will send an and display an alert when a device is due for calibration Calibration Schedule Management

Made in United States of America EMIT SIM emit.descoindustries.com Calibration Alerts  EMIT SIM contains an Alert feature tied into its calibration tracking module  Automated alerts are sent to a predefined list of supervisors when a device is due for calibration

Made in United States of America EMIT SIM emit.descoindustries.com Hardware Setup – ZVM Solos Only

Made in United States of America EMIT SIM emit.descoindustries.com Hardware Setup – Ionizers Only

Made in United States of America EMIT SIM emit.descoindustries.com Hardware Setup – Monitors and Ionizers

Made in United States of America emit.descoindustries.com Need More Information? For a demonstration contact EMIT for your local sales representative emit.descoindustries.com or emit.descoindustries.com EMIT SIM