Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook For Marine Engineers 2., Pomorski fakultet, Rijeka 2009. LUZER, J., SPINČIĆ, A., Gramatička.

Slides:



Advertisements
Similar presentations
Heating, Ventilation, and Air-Conditioning (HVAC) Systems
Advertisements

Energy Efficient Steam Systems
Engine Cooling And Lubrication
Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
ADX 150 – Engine Repair ADX 170 – Climate Controls
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
I.C. ENGINES LECTURE NO: 14 (5 May 2014).
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 4th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For.
Energy Efficient Steam Systems. Steam Systems Steam systems most widely used type of process heating Advantages of steam: –Heat carrying capacity of steam.
Objective of the session.
Cooling As working temperatures rise, the strength of metals used reduces. This in turn will force manufacturers to use superior metals/alloys, which can.
Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 5th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook.
Essential reading: SPINČIĆ, A., An English Textbook For Marine Engineers I., Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička vježbenica.
Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Section 16.3 Using Heat.
ENGINE ROOM LOG.  During the watch a log is kept of the various parameters of the main and auxiliary equipment. This may be a manual operation provided.
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
LESSON FOURTEEN. WATER COOLING SYSTEM 1.HEAT SOURCES.
Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook For Marine Engineers 2., Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
WATER COOLING SYSTEM.  The water cooling system for a slow speed diesel engine consists of two separate circuits: one for cooling the cylinder jackets,
Unit 206: Domestic hot water systems
2 July Turbine Condensate System
Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook For Marine Engineers 2., Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Marine Engine Systems Merchant Marine Training Centre.
Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 5th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook.
Essential reading: SPINČIĆ, A., An English Textbook For Marine Engineers I., Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička vježbenica.
STEAM CONDENSERS.
HEATING AND AIR-CONDITIONING
Fuel Oil Systems Fuel Oil Systems consist of: Storage Tanks Pumps
Hydronic Mechanical Controls
TURBINE & COOLING SYSTEM Presented By – AVIJEET PRATAP 07ME12 IET AGRA
Diesel Power Plant Mr.B.Ramesh, M.E.,(Ph.D) By
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
The Cooling System.
Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Plan 2 – Dead-end Seal Chamber Optional Jacket
Air Conditioning in tropical climates Presented by Ranjeet Kumar Nayak.
Essential reading: SPINČIĆ, A., An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička vježbenica.
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Essential reading: SPINČIĆ, A., An English Textbook For Marine Engineers I., Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička vježbenica.
© Goodheart-Willcox Co., Inc. Permission granted to reproduce for educational use only.
Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 5th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook.
WATER COOLING SYSTEM. 1.HEAT SOURCES  Burning of fuel  Heat developed by compression of air  Frictional heat.
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 5th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For.
LESSON THIRTEEN LUBRICATING OIL SYSTEM. 1.PRIMARY PURPOSE OF LUBRICATION To keep a clean layer of lubricating oil film / luboil film between the contacting.
Section 3 Using Heat.
Heat engines played a key role in the development of the modern industrial world. Steam locomotives were an important early use of the steam engine. Electric.
Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 5th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook.
Essential reading: SPINČIĆ, A., An English Textbook For Marine Engineers I., Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička vježbenica.
The Cooling System.
First Law of Thermodynamics  The first law of thermodynamics is often called the Law of Conservation of Energy.
The Cooling System (Reasons for)
Chapter 39 Cooling System Fundamentals.
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
Manoj kumar 2009JE0406 Mining machinery engineering.
REFRIGERATION SYSTEMS Er. Gagandeep kaur Associate Prof., Electrical Engg. PTU Giani Zail Singh Campus, Bathinda. Id:
Chapter 37: Fluid Containment
Fluid Statics/Dynamics
Unit 37: Fluid containment Dr
air cycle cooling systems
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
Hot water Systems Heaters.
Hot Water Systems Cylinders and Systems.
______________ Combustion Engine
Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.
Presentation transcript:

Essential reading: SPINČIĆ, A., PRITCHARD, B., An English Textbook For Marine Engineers 2., Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička vježbenica engleskog jezika za pomorce, Pomorski fakultet, Rijeka Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 5th Semester

Lesson 14 WATER COOLING SYSTEM

Lesson 14 – Water cooling system KEY WORDS turbo-blower- turbopuhalo, turbopunjač contamination (n.)- zagađivanje, miješanje vode s uljem piston cooling gland- brtva, brtvilo circulating pump- protočna / cirkulaciona pumpa header tank- kolektor, sabirnik expansion tank- ekspanzioni spremnik venting (n.)- odzračivanje, odušivanje, otplinjavanje water make-up- dodavanje vode engine discharge- odvod, ispust iz motora pump suction line- usisni vod pumpe cylinder cover- poklopac cilindra exhaust valve cage- skidljivo kućište ispušnog ventila supply tank- dobavni tank drain tank- ispusni tank piston distribution manifold - sabirni kolektor vode za hlađenje klipa

Lesson 14 – Water cooling system KEY WORDS return (n.)- povratak, vraćanje inspection tank- kontrolni tank steam coil- parni zagrijač sa spiralnim cijevima raw water- sekundarna rashladna voda inhibit (v.)- spriječiti, kočiti scale deposit- talog kamenca, naslaga water treatment- obrada vode, pripremanje vode extract pump- pumpa kondenzata feed pump- napojna pumpa soot (n.)- čađa contrivance (n.)- naprava, aparat accessory (n.)- pomoćni uređaj, pribor sleeve for soft material- košuljica, čahura, cijevasti element impurity (n.)- nečistoća

The water cooling system for a slow speed diesel engine consists of two separate circuits: one for cooling the cylinder jackets, cylinder heads and turboblowers; the other for piston cooling. A separate piston cooling system is used to prevent any possibility of contamination from piston cooling glands. The water cooling system for a slow speed diesel engine consists of two separate circuits: one for cooling the cylinder jackets, cylinder heads and turboblowers; the other for piston cooling. A separate piston cooling system is used to prevent any possibility of contamination from piston cooling glands. Water cooling system

The jacket cooling system is a closed circuit. Water passing from the engine returns through a cooler to the circulating pump and then to the engine. A header or expansion tank is placed at a sufficient height to allow the venting and water make-up in the system. This has connection from the engine discharge and to the pump suction line. A heater is included with by-pass to warm the engine prior to starting by circulating hot water. The jacket cooling system is a closed circuit. Water passing from the engine returns through a cooler to the circulating pump and then to the engine. A header or expansion tank is placed at a sufficient height to allow the venting and water make-up in the system. This has connection from the engine discharge and to the pump suction line. A heater is included with by-pass to warm the engine prior to starting by circulating hot water. Water cooling system

Water enters at the lower end of the jackets, passing up to the cylinder covers and then to the exhaust valve cages, if these are fitted. Some water is taken from the discharge and passed through the turbo-charger turbine cooling spaces, before returning to the main discharge. Water enters at the lower end of the jackets, passing up to the cylinder covers and then to the exhaust valve cages, if these are fitted. Some water is taken from the discharge and passed through the turbo-charger turbine cooling spaces, before returning to the main discharge.

The piston cooling system pump draws from the supply (or drain) tank passing water to the piston cooler and then to the engine piston distribution manifold. The return from these flows by gravity to the supply tank. Arrangements may also be included for the return of any leakage from the glands. This must first pass through an oil separator and inspection tank. A steam coil is fitted in the piston cooling water supply tank for preparing the engine for sea. The piston cooling system pump draws from the supply (or drain) tank passing water to the piston cooler and then to the engine piston distribution manifold. The return from these flows by gravity to the supply tank. Arrangements may also be included for the return of any leakage from the glands. This must first pass through an oil separator and inspection tank. A steam coil is fitted in the piston cooling water supply tank for preparing the engine for sea.

All fresh water coolers are circulated with the salt (or raw) water and have by-pass valve fitted. Thermostatic valves are provided to regulate the flow of either the fresh water or sea water and so control the temperature of water passing through the engine. Fresh water pressure should always be greater than that of the salt water to prevent any possibility of salt water entering the engine system. To reduce the corrosive action and inhibit the formation of scale deposit in the system it is usual to provide some form of water treatment. All fresh water coolers are circulated with the salt (or raw) water and have by-pass valve fitted. Thermostatic valves are provided to regulate the flow of either the fresh water or sea water and so control the temperature of water passing through the engine. Fresh water pressure should always be greater than that of the salt water to prevent any possibility of salt water entering the engine system. To reduce the corrosive action and inhibit the formation of scale deposit in the system it is usual to provide some form of water treatment.

Both jacket and piston cooling systems must have alarms fitted to give warning of loss in pressure, high or low tank level or, in some cases, excess of temperature. Both jacket and piston cooling systems must have alarms fitted to give warning of loss in pressure, high or low tank level or, in some cases, excess of temperature. On most engines the fresh water and sea water pumps are both of the centrifugal type. They may be engine driven or they may be separately driven by electric motors. On most engines the fresh water and sea water pumps are both of the centrifugal type. They may be engine driven or they may be separately driven by electric motors.

1.Which parts of the diesel engine require cooling? 2.Why is cooling necessary? 3.How is cooling for a slow speed diesel engine carried out? 4.When is a cooling system said to be of a closed type? 5.Why is the water cooling system fitted with a header tank? 6.What is the purpose of the heater? Exercise 1 – Answer the following questions:

7.Is the water for piston cooling also drawn from the header tank? 8.Is the sea water the primary cooling medium in the system? 9.What are the thermostatic valves provided for? 10.Why must cooling water be adequately treated? 11.What alarms should the cooling system be supplied with? 12.What are the fresh and sea water pumps driven by? Exercise 1 – Answer the following questions:

I. I. Complete the sentences by choosing the correct ending: In a closed cooling system the water leaving the engine jacket is:   not returned to the engine at all.   recirculated without exposure to air.   Exposed to air before being recirculated In the cooler salt water pressure should always be   lower than fresh water pressure.   equal to fresh water pressure.   greater than fresh water pressure The secondary cooling medium used to extract heat from the primary coolant by passing through the heat exchanger is   air.   fresh water.   raw water A centrifugal or axial flow type pump that supplies cooling water to mwchinery is known as the:   extract pump.   circulating pump.   feed pump The hard deposit that forms on inside of boilers, water- pipes or on exposed ferrous metals is named:   rust.   scale.   soot The contririvance that diverts the circulation of a fluid (water, oil, or gas) as in the water cooling system where part of the hot water off the engine is returned to the inlet piping to supply the engine with water at a controlled temperature is the:   regulating valve.   by-pass system.   feed piping. Exercise 2 – Comprehension

A a.Acessory that adjust the engine cooling water to a constant operating temperature. b.Sleeve of soft material used to secure a tight packing on a piston. c.A unit that transfers heat from one fluid to another, as from water or oil to water or air. d.A container connected to an engine cooling system, generally at the highest point, partly filled with water for venting and make up. e.A device used to remove water and other impurities from lubricating and fuel oils. f.A turbine driven air compressor powered by the exhaust gas. B 1.DRAIN TANK 2.HEADER 3.HEATER 4.HEAT EXCHANGER 5.GLAND 6.THERMOMETER 7.THERMOSTAT 8.TURBO-BLOWER 9.DISTRIBUTION MANIFOLD 10.OIL SEPARATOR Exercise 3 – Match the statements in Column A with the right terms listed in Column B: