Tek-CARE®400 P5 Features & Benefits Power over CAT5 (P5) Updated aesthetics Multicolor LED dome lights Duty station with 4 call LEDs Pleasant call tones from duty station. Flexible wiring Bed interface Large buttons Auxiliary inputs and outputs Resident station for ALF market Check-in station for ILF market Plug-in module quickly converts standard dome lamp into a zone light

NC402TS Master Station Features Easy-to-use intuitive master with small footprint uses minimal desk space Touchscreen color LCD display No PC required Built-in keyboard slides in for a small footprint On-screen volume control Membrane keypad Pleasant call tones Customizable call type labels, dome light colors, flash rates, tone and audio volume

NC402TS Master Station Screen Views Two views available: List View—Calls are displayed in a simple list. A separate column displays staff requests and presence. Icon View—Rooms, zones, masters and systems are displayed as icons. Touch an icon to select that item. There are two views available on the touchscreen. Touch the onscreen Switch View button to toggle between them. Selection Methods—To perform most common master operations, select a subject (a station, a zone, a master, or the system) and then perform an operation on it. The onscreen Selection Indicator box displays the subject that is currently selected System—To select all stations on the system, touch the onscreen SYSTEM button –or– touch the onscreen system icon –or– type the word “system.” Master—To select all stations in this master’s assigned zones, touch the onscreen THIS MASTER button –or– touch the master’s onscreen icon –or– type the word “master” – or– type the master’s number. To select another master (but not its stations), touch the master’s onscreen icon –or– type the master’s number. Clear any selection by pressing the onscreen CLEAR button next to the selection indicator. The box will eventually clear on its own. List View Icon View 4

NC401VFD Master Station Features Best used as nurse workstation master 4×40-character Vacuum Fluorescent Display Four-call display Membrane keypad Pleasant call tones Customizable buttons, call type labels, corridor light colors, tone and audio volume No PC required

IR411P5 Single Patient Station Single DIN-style jack with call LED Large grey reset button UL® 1069 Listed and cUL® Listed Control and power over CAT5 cable Fully supervised wiring to the central equipment Uses pillow speakers or pushbutton call cords No dummy plugs needed to prevent “cord out” call All stations are interchangeable Simplified wiring with plug-in connectors Full-duplex audio

IR412P5 Dual Patient Station Two DIN-style jacks with individual call LEDs Large grey reset button UL® 1069 Listed and cUL® Listed Control and power over CAT5 cable Fully supervised wiring to the central equipment Uses pillow speakers or pushbutton call cords No dummy plugs needed to prevent “cord out” call All stations are interchangeable Simplified wiring with plug-in connectors Full-duplex audio

SF401EX Strain Relief Cable The SF401EX Strain Relief Cable is used to increase the life span of call cords, pillow speakers and room stations. The cable is placed between the call cord or pillow speaker and the room station. If the call cord or pillow speaker is attached to a bed and then the bed is pulled away, the strain relief cable disconnects. This prevents damage to both the room station and the call cord or pillow speaker. UL® 1069 Listed Molded connectors Clean break-away action Increases life of call cords, pillow speakers and room stations

IR418P5 Resident Station 6’ cord for call placement Large reset button Attractive design for all decors UL® 1069 Listed and cUL® Listed Control and power over CAT5 cable Fully supervised wiring to the central equipment All stations are interchangeable Simplified wiring with plug-in connectors Full-duplex audio

IR445P5 Resident Check-in Station Programmable call button can be used for resident check-in 6’ cord for call placement Large reset button Attractive design for all decors UL® 1069 Listed and cUL® Listed Control and power over CAT5 cable Fully supervised wiring to the central equipment All stations are interchangeable Simplified wiring with plug-in connectors Full-duplex audio

IR410P5 Staff Station Three programmable push buttons: Call, reset & emergency (by default) UL® 1069 Listed and cUL® Listed Control and power over CAT5 cable Fully supervised wiring to the central equipment All stations are interchangeable Simplified wiring with plug-in connectors Full-duplex audio

IR415P5 Duty Station Four-LED indication of call level in the station’s zone! Programmable call button. Same pleasant call tones as the master station! UL® 1069 Listed and cUL® Listed Control and power over CAT5 cable Fully supervised wiring to the central equipment All stations are interchangeable Simplified wiring with plug-in connectors Full-duplex audio

IR400P5 Multipurpose Station Support for switches, contact closures, speakers and other call originating devices Attractive design for all decors UL® 1069 Listed and cUL® Listed Control and power over CAT5 cable Fully supervised wiring to the central equipment All stations are interchangeable Simplified wiring with plug-in connectors Full-duplex audio

P5 Peripheral Devices SF340B Emergency SF337C Bath SF339 Emergency pushbutton SF341B Code SF350B Presence, two levels

LI484P5 Corridor Light The LI484P5 Multicolor-LED Corridor Light provides visual indications of calls originating from patient, staff, duty, bath, emergency, presence and code call stations. UL® 1069 Listed and cUL® Listed Simplified wiring with plug-in connections No bulb replacement needed Excellent visibility Fully supervised wiring to the central equipment

PM484ZP5 Zone Lamp Module The PM484ZP5 Zone Light Module, when added to an LI484P5 Corridor Light, provides auxiliary visual annunciation for call activity within the zones and call types to which it is assigned. Patient priority and staff presence are indicated by four programmable LEDs. UL® 1069 Listed and cUL® 1069 Listed Ability to drive secondary lamp without zone lamp module Plug-in connections Inputs for bath & code switches No bulb replacement needed Excellent visibility Supervised connections

System Layout

Integrations

Tek-BRIDGE™ The Tek-BRIDGE™ is the platform for Tek-MMARS®400 software and for software modules that interface to ancillary equipment and the facility’s network. LS486 Tek-MMARS®400 Management, Monitoring and Reporting System software Database logging of Nurse Call Activity HTML-based Reporting Software— accessible via network connection Back-up, Archive and Restore functions

Radio Pocket Paging Both Automatic and Manual radio pocket paging options may be added to the system. By associating rooms with staff or zones, pages for incoming calls include the correct room, bed number and call type. The Custom Paging options is easily handled using the NC402TS Master Station’s touchscreen and slide out keyboard. The user may define preprogrammed messages to speed up the action. Three levels of pagers can be assigned: primary, secondary and tertiary—ensuring that calls are responded to.

LS453 Email Output Interface Nurse call system notifications can now be sent to staff email addresses, adding another means of communication. Set up the mail server settings and add email addresses Once email addresses are added, they can be assigned to staff via the Staff tab—just like a phone, pager, or badge. This allows staff assignments to send nurse call messages via email.

LS452 ADT Interface Our LS452 ADT Interface Software using the HL7 Standard runs on the NC470 Tek-BRIDGE™ which is connected to both the Tek-CARE®400 Nurse Call System and the facility’s network.   The LS452 software receives patient information from the facility’s Admit, Discharge, Transfer system via the facility’s network. Patient name, room/bed number and doctor name are then displayed on NC402TS Touchscreen Master Stations. Programming is quickly done via the included config tool. Accessing a facility’s Hospital Information System maintains a focus on patient census information for use in nurse-call-related activities and on patient and bed data for bed management. Not only does this interface support efficient patient care by providing detailed patient information, but administration will benefit from monitoring and reporting features to ensure the facility is operating at an optimal level.

Media Gateway — VoIP Phone Interface With the NC4654 Media Gateway, staff can use VoIP phones to: place a call to a patient station, automatically answer a patient call, manually clear a routine level call, page all stations or a single zone, set a nurse or aide service request to a patient station, set a STAT request to a patient station, monitor a zone, use nurse attend.

LS451 Versus Tracking Interface Our LS451 Versus® Tracking Interface Software receives tracking badge locations from the Versus® Information System (VIS), and displays it on NC402TS Touchscreen Master Stations. Staff members wearing badges are automatically logged into patient rooms.