How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas.

Slides:

Advertisements

Similar presentations

Making connections with Cat5 Way cool!

Advertisements

How to wire Ethernet Cables. Tools Required CAT 5 Cable - bulk Category 5, cable RJ45 Ends Crimper for RJ45 Wire Cutters - to cut and strip the cable.

How to Make a Straight-through Cable

Crimping Get the pinouts for the desired connector and application. 2.Identify the proper connector and the associated pins for your application.

CABLE CRIMPING AND TESTING. TYPE OF CABLE STRAIGHT CABLE CROSSED CABLE.

HOW TO MAKE UTP CAT-5/5e CABLE

Computer Networking Department of Computer Networking Application CHAPTER 8 TRANSMISSION MEDIA 1 The first section 2 Exercises 3 Online lecture.

Building a T568B Network Cable Examples of good and bad cables Identification of components Critical areas of cable.

+ Straight-Through Cable Construction Lab 4. + Data Transmission In data transmission system, the transmission medium is the physical path between transmitter.

Instructor & Todd Lammle

Physical Transmission Media 8 5/9/ Modified by: Brierley.

Hands On: Cutting and Connectorizing UTP Chapter 3a Panko’s Business Data Networks and Telecommunications, 6 th edition Copyright 2007 Prentice-Hall May.

Chapter 32 Serway & Jewett 6 th Ed.. 9/22/04 What happens when we close the switch? I t I = 0I = I o R E B.

Network Cabling. Introduction Cable is the medium through which information usually moves from one network device to another. There are several types.

The making of Ethernet Standards For the Ethernet Cabling & PoE (power-over-Ethernet).

Router. Switch Repeater Cable is the medium through which information usually moves from one network device to another. It used to connect one network.

CCTV SMART CABLING Twisted Pair Transmission System

Crafting a Cat5e Cable Scott H. Bowers. Materials Raw Cat5e cable ~50 feet. Wire Cutter/Cable Stripper RJ-45 Crimper Ethernet tester RJ-45 terminators.

1 PATCH CORDS BASIC TELECOMMUNICATIONS. 2 Telecom Cabling Even with the advent and deployment of wireless technology, with its inherent problems of size,

Day 1 Sritrusta Sukaridhoto. UTP 5e cable/patch Straight-through.

The Saigon CTT Semester 1 CHAPTER 5 Le Chi Trung.

Crossover Cable Construction

Modern Ethernet Chapter 6. Contents Define the characteristics, cabling, and connectors used in 10BaseT and 10BaseFL Explain how to connect multiple Ethernet.

Copper Media Describe the specifications and performances of different types of cable. Describe coaxial cable and its advantages and disadvantages over.

PREPAIR BY :  MOHD SHARIFUDDIN B SAHABUDIN  12DEP11F11006  IMAN BT ABDULLAH  12DEP11F1002  MUHAMMAD MUIZZUDDIN BIN ZAINOL ABIDIN  12DEP11F1003 

Module 3: Networking Media Safe Handling and User of a Multimeter Voltage Measurement Resistance Measurement Series Circuits 3.1.9a.

Making and Testing Cat 5 Cables. EIA/TIA-568A and 568B Straight Through and Crossover Cables EIA/TIA-568 Commercial Building Telecommunications Wiring.

Ethernet Physical Layer Topology: Order in which stations receive bits Ethernet hubs use a bus topology –Signal is broadcast –All stations receive.

MOCK LECTURE in COMPUTER NETWORKS TRANSMISSION MEDIA.

BIX In-Building Cross Connect system BIX Installation Guide ELCM 254 Updated December 2013 gmail.com 1 Most of the images and some text for.

Mr C Johnston ICT Teacher BTEC IT Unit 05 - Lesson 13 Routine Network Management Tasks.

Project On Ethernet Cable Building & Video Recording James Maclean & Stephen Craig.

Ethernet Cable. Straight Through Connection  I went ahead with the Straight through connect for my first few cables, using the T-568A wiring standard.

Page 1 - © Richard L. Goldman RJ-45 Termination ©Richard L. Goldman June17, 2002.

Network Anatomy By: Roland J. Boutte. Ethernet Cable cable used to connect computing devices together directly. two hosts or two switches to each other.

Cross-Over Cable Steps to a successfully terminated end!

1 LAN Wiring, Physical Topology, and Interface Hardware.

Chapter 5a. 5a-2 Single Twisted Pair Jacket Four pairs (each pair is twisted) are enclosed in a jacket. Copyright 2011 Pearson Education, Inc. Publishing.

Network Tools and Cabling. Network Tools RJ means "Registered Jack" This is a plastic connector that looks like a large telephone-style connector. Used.

How to Create RJ – 45 Wire.   To create the RJ – 45 cable or better known as the Cat wire it is very simple all you need to do is follow my simple instructions.

BTEC NAT - UNIT 5 - NETWORKING UNIT 27 - NETWORKING CABLING & CONNECTORS.

Wildland Fire Information and Technology Making and Testing Cat 5 Cables.

David Rodriguez.  Use protective glasses  Be careful of sharp tools  Have first aid-kit near by  Familiarize yourself with surroundings.

T. Hajer Brahim & T. Rania Alakazalah U.Y: 1435/1436 H.

UTP cabeling. Introduction This document shows how to properly construct a Crossover network cable. This cable can be used to directly connect two computers.

Copyright © 2006 Heathkit Company, Inc. All Rights Reserved Introduction to Networking Technologies The Ethernet 10BaseT LAN.

Lecture 2 unit 1.

© ExplorNet’s Centers for Quality Teaching and Learning 1 Use appropriate tools for network cabling and connections. Objective – 2%

Physical Transmission Media Chapter 8. Objectives In this chapter, you will learn to: Identify the characteristics of wireline transmission Describe the.

How to wire Ethernet Cables. Tools Required CAT 5 Cable - bulk Category 5, cable RJ45 Ends Crimper for RJ45 Wire Cutters - to cut and strip the cable.

ETHERNET CABLE TYLER THORNBURG LTEC STRIPPING AND CUTTING First you will need to strip the wire. I used scissors to cut off the rubber around.

Fatima Alibrahim Intro. to Telecommunication MISY3312

Lab#1 UTP cables.

CREATING A 568A, 568B, OR CROSSOVER CABLE Creator:Dennis Groseclose

How to wire Ethernet Cables

Transmission Media (Coaxial Cable and Twisted Pair) Khaled Al Otaishan

Cat 6 & Cat 6A Cables - How Are They Different?

Networking TRANSMISSION MEDIA.

Chapter 2 Ethernet Networking and Data Encapsulation

Hands On: Cutting and Connectorizing UTP

BIX In-Building Cross Connect system

Networking Fundamentals

Chapter 2 The Physical Layer.

Hands On: Cutting and Connectorizing UTP

Cabling The Tie that Binds.

Lab#1 UTP cables.

Ethernet Cable Local Area Networks.

Fundamentals of Computer Networks

Hands On: Cutting and Connectorizing UTP

LESSON NO:11 Network Cabling Making connections with Cat5 Way cool! SMI-Lecturar Samreen Javed.

Presentation transcript:

How to Build an Ethernet Cable ASIF ISLAM LTEC 4550 University of North Texas

Introduction First commercially introduced in 1980, Ethernet cable is the still the most popular way of networking for home and office. Ethernet cabling technology was invented by Xerox Park and it’s very secure to network. And most importantly, it’s most the compatible networking cable ever invented There are six different types of Ethernet cable: Category or Cat 3, 5, 5e, 6, 6a and 7 and they differ for their transmission speed and interface. In this illustration, I will explain the steps in building the most popular and used Category 5e Ethernet Cable.

What We Need 1. Unshielded twisted pair (UTP) cable (Cat 5e) 2. RJ45 Connector (Modular Connector) 3. Crimping Tool 4. Cable Tester Islam[Personal Screenshot]. July 21, 2014

Standards of Wiring Ethernet Cable There are two standards of building Ethernet cable. 1. T568A 2. T568B We care going to use the most popular T568B Chart. [Online Screenshot].

Step 1 We will strip the cable jacket on one side; approximately 1.5 inch down from the end. Step 1, Islam[Personal Screenshot]. July 21, 2014

Step 2 We will spread the four pair of twisted wire apart. If needed pulling the string will bring down the jacket more for convenience. Step 2, Islam[Personal Screenshot]. July 21, 2014

Step 3 Next we will need our T568B standard chart handy. We will untwist all four pairs of wires and align them according to our chart. Step 3, Islam[Personal Screenshot]. July 21, 2014

Step 4 Then we will cut the edge of the wire as straight as possible. (this step is very important before insertion) Step 4, Islam[Personal Screenshot]. July 21, 2014

Step 5 Now we will push the aligned wires all the way inside the connector. (very important to push them in their appropriate guides) Step 5, Islam[Personal Screenshot]. July 21, 2014

Step 6 We will push the connector in the crimping tool and squeeze all the way down Step 6, Islam[Personal Screenshot]. July 21, 2014

Step 7 Now we can repeat step 1 to 6 for the other end of the cable Step 7, Islam[Personal Screenshot]. July 21, 2014

Step 8 [Our cable is built] To ensure the proper data flow between each end, we can use a network cable test to check both end. Step 8, Islam[Personal Screenshot]. July 21, 2014

By following step 1-8, I made two network cable Islam[Personal Screenshot]. July 21, 2014