Name: Hussain Abbas Qassim Ashoor ID: Supervisor: David Krause Senior Project 2014

Index Project objectives Introduction Tasks reviews Gantt Chart Difficulties and recommendations

Project objectives Making a prototype to demonstrate a separation system plant. Implementing what was learned Designing a PCB circuit Write a PLC code program and Mbed

Introduction The project idea Company conflicts Improving the project idea

PFD (Process Flow Diagram)

Oil Well Pump Oil Well Pump is a part of the gas separation system and operated by Tatweer Petroleum.

Separation system plant Where the gas separates from oil and sent to stores.

Stores Here were stores the oil and gas to be deliver to the Companies Banagas Store Bapco Store

Boiler Boiling the un wanted water

Company conflicts PLC used in the Company is Rslogix 500 There are no budget Limited equipment No workshop in the Company for students

Improving the project idea Simulation Mbed program Ultrasonic sensor, Temperature sensor, Level sensors and Gas sensor Control panel and SCADA program.

Planning Solid works Designing any mechanical part Ms Visio Designing the PFD process flow diagram MS project Doing the Gantt chart (what to do) Ms Power Point Designing the Control Panel

Boiler Tank Designed at Solid Works Built in Building 34

Ventilation 3D Concept

Control Panel 25 %

Building (Fabrication)

7-segment circuit

Mbed, Comparator and switch regulator Circuit

PCB

Relay Circuit and PCB

PCB before soldering

PCB soldered

Relay PCB in the project

Connection and teaching mode

Programming PLC Program (RSlogix5000) Mbed Program (Micro Controller) Factory Talk View (SCADA)

Separation System Block Diagram Control Panel SCADA Fans Pumps LCD Level Sensor Ultrasonic Sensor Temperature Sensor 7-segment Buzzer PLC Mbed

SCADA Stands for (Supervisory Control and Data Acquisition)

MS Project

Old Gantt Chart

New Gantt Chart

Difficulties Recommendation The company conflicts Building the project on my own budget Ultrasonic sensor Using better PLC module which could produce more than 205mA Adding various sensors such as (pressure sensor and flow meter), also use better equipment to make the project with high quality