Cell Phone Terminal

Setting up your cell phone How to do a transaction

Select Your Service Provider: As every phone is unique, some of the options may not work on all handsets. Choose based on the criteria below: WAP Enabled – Any internet enabled cell phone USSD – Any cell phone or network MTN SMS – Only MTN Users with a 32/64K SIM Card

Dial *170*1# and press the ‘Call’ button A pop-up will appear – Please do not access the MTN Menu until “Download Complete” SMS has been received. PLEASE NOTE: If you have used the services before and already have MCredit on your cell phone, you might need to reload the software. To see whether your software is up to date, go into the Mcredit Menu. -If the screen shows “Powered by Vwire” and then “Process Card”, your software needs to be upgraded. Dial *170*1# to reload the software. Switch Phone Off and On. -If your MCredit Menu Shows “Powered by “Baytek/Click2Pay”and then gives the option “Mobile Cash/Click2Pay” or “LinqPay”, you can skip the instructions to download the software and start transacting on Mobile Cash/Click2Pay.

3: An SMS will come through with the same message 4:You will Receive a “Download Complete” SMS. Switch the phone off then on again. 5: You should then have MCredit under the MTNMenu which can be found in your Main Menus, or Applications, Tools, Organiser, Entertainment or Programmes Menus. To find the menu on a blackberry, look under the Setup Menu or Main Menu. To find the menu on an iphone, look under Settings, Phone Settings, SIM Applications. How to do a transaction

Go to the Web /Browser /Internet Menu Select “Bookmark” Choose the ‘New Bookmark’ or ‘Add Bookmark’ option

Call the bookmark “WAPPoint” Enter the following address (For Smart Phones) or If you have made use of our services before, ensure that you have the correct bookmark address. Edit if necessary.

Go the MTN Menu Choose MCredit

On the “Powered by…” screen select OK You might also have the option to select Mobile Cash/Click2Pay and Linqpay. Select Mobile Cash/Click2Pay Choose “CreditCard Processing” option

Your “ PIN code” is the Last 4 digits of your cell phone number backwards but may vary depending. Please call us to obtain your correct pin. When entering the amount Use a ‘*’ for decimal point

Enter the card number Enter the expiry date - mmyyyy

CVV is the Last 3 digits on the back of the card. Choose “Straight” or amount of months for “Budget”.

In the reference field, enter Cardholder’s initial and surname. Enter Cardholder’s CELL PHONE number

Ignore the ‘Auth Code’ field and press OK A pop-up and an SMS will be sent that will say if the transaction has been approved. Write down the Reference number. Eg: ‘14938: ’, the reference number will be after the colon; is the batch number.

Go to your Internet M enu on your cell phone (Web/ Browser/ Services Menu) Select the ‘WAPPoint’ bookmark that you created, and connect to the wap site. This is only available on newer cell phones and only if the SIM card is not compatible with our SMS software

On the Mobile Cash Login Screen Enter your Mobile number in the international format. (starts with 27 and leave out the ‘zero’ Eg: will be ) The Pin Code is the last 4 digits of your cell phone number backwards but may vary depending. Please call us for your correct pin. Select “Login”

Enter the amount in cents (eg = R548.00) Enter the Card number Expiry date - mmyy CVV is the Last 3 digits on the back of the card

In the “Reference field” enter Cardholder’s initial and surname The cardholder’s CELL PHONE number The Manual Auth Code field – Ignore and press OK

Choose “Straight” or amount of months for “Budget” Process Confirm – Yes Declined/ Approved (Write down Trace Number) Options - Exit

Dial *120*5729# in the home screen of the phone. Then press the ‘Call’ button For easy access each time you need to transact, save this number as a contact in your phonebook

Your “PIN code” is the Last 4 digits of your cell phone number backwards When entering the amount use a ‘*’ or ‘.’ for decimal point

Enter the card numberEnter the expiry date - mmyyyy

CVV is the last 3 digits on the back of the card. In the reference field, enter cardholder’s surname.

If the amount exceeds R300.00, choose “Straight” or amount of months for “Budget”. Enter Cardholder’s CELL PHONE number

A pop-up and an SMS will be sent that will say if the transaction has been approved. Write down the Reference number. Eg: ‘

Please note you can also download your Invoices and Statements from our website. Contact us for further support