The Electronics Kit TEE2O1 Mr. Payne’s Period 5 Room S111

Contents of the Kit This is the Kit ! Each group will be responsible for maintaining the contents of 1 kit.

The Electronics Kit Identify the Parts in Each Bag You should be able to identify the contents of each bag. Make sure each bag is kept separate from other bags. Note the unbagged: Parallel Port Wire 1m Wire strippers/cutters 1 Pliers 1 Wire - 5 colours hookup wire 25'

Bag One Resistors, LEDs, Transistors and Capacitors 110 ohm resistors ohm resistors 16 1K ohm resistors 4 2K ohm resistors 1 LEDs (red) 16 LEDs (green) 2 LEDs (yellow) 2 1N4001 (transistor) 6 2.2uF capacitor 1

Bag Two Motors and 25 pin parallel port connector kit. PN2222A 4 PN V-12V DC motor 1 stepper motor 1 DB25 Plastic Hood 1 DB25 D-sub connector - crimping style 1

Bag Three More Resistors 10K ohm resistor 8 51K ohm resistor 1 100K ohm resistor 1 510K ohm resistor 1 1.5M ohm resistor 1

Bag Four Wire for 25 pin connector Male crimp pins 16 Wire - 5 colours hookup wire 25 inches Parallel Port Wire 1m

Bag Five Buttons and Integrated Circuits 74LS bit Bi- directional shift register 1 74LS to 16 de- Multiplexer 1 Push button 8

Bag Six 8 Segment Display and Integrated Circuits 74LS245 - Transciever 1 74LS bit addressable latch Timer 1

Bag Six More Integrated Circuits 74LS00 - NAND 1 74LS02 - NOR 1 74LS04 - Inverter 1 74LS08 - AND 1 74LS32 - OR 1 74LS Segment decoder/driver 1 74LS74 - Dual D flip- flop 1 74LS86 - XOR 1

The Big Cahuna The Power Board and Switches and Input / Output Lights The electronic experimenter box is where you provide power and ground to your circuits.

How It Works See the upcoming Powerpoints on Labs and 4.2.2

How It Works

Next Steps Be sure that you know where all parts belong before you use them to make circuits. Remember to replenish your kit for the next class! A full parts list for the kit is available at