RPC «REGMIK» 15582, Ukraine, Chernihiv region, Rivnopillya, Gagarin Street, 2B phone.: +38 (0462) , , , , +38 (050) web: skype: Regmik_UA

 Development and manufacturing of temperature sensors, humidity, optical and capacitive sensors, including the customer's individual requirements;  Development and manufacturing of control and measuring devices, devices for process automation (meters and controllers for temperature, humidity, pressure, devices for protection of equipment, information transfer devices);  Implementation of integrated automation projects (construction of automatic control systems);  Development of software of any complexity for PC, as well as for specialized processors and controllers;  Development and manufacturing devices and systems under order using microcontrollers, processors, programmable logic integrated circuit;  Selling of thin-film platinum temperature sensors of company Heraeus Sensor-Technology (Germany);  Supply of electrical products, electronic components;  SMD services.

Thermocouples (temperature sensors)  Resistance thermometers (temperature sensors) submersible and submersible with cable are designed to measure ambient temperature, fluids, gaseous and friable chemically non-aggressive environments and solid surfaces in various industries.  Resistance thermometers (temperature sensors) surface are designed to measure the surface temperature of solids in a variety of industries. Have small sizes, improved indexes of thermal inertia, do not require difficult installation work on object.  Resistance thermometers (temperature sensors) air are designed to measure the air temperature in various industries. Sensors have minimum rates of thermal inertia, do not require difficult installation work on object. Can be used for temperature measurement in ventilation ducts, vaults, etc.  Resistance thermometers (temperature sensors) REGMIK the type of measurement (sensing) elements are divided into: - Resistance thermometers (temperature sensors) – RTC (Pt100, Pt500, Pt1000)​​; - Thermocouple - Type K, J, L; - Semiconductor converters.

Thermocouples (temperature sensors)

Meters-regulators temperature and humidity  Meter temperature are designed to receive and convert the input signals to the value of physical quantity and display measured value on the built-in digital display.  Meter-regulators temperature is designed to receive and convert the signal from thermoelectric transducer (temperature sensor) in temperature value and display it on the built-in digital display. Device automatically controls state of sensor, correctness of entered parameters and calibration of device. Signal "error" is formed on the results of control. Device can be used to monitor the implementation of various technological processes in industry.

Meters-regulators temperature and humidity

Level regulators  Level regulators are designed to automate technological processes related to control and regulation of the liquid level and friable substances; create systems for the automatic maintenance of liquid level in tanks, accumulation reservoirs, etc. Devices are made in the housing for mounting on DIN-rail.  Two-channel level regulators are used to create systems with automatic filling and draining of the tank on hysteresis law. Upper-level sensor should be connected to the input 1 and low-level sensor - to the input 2.  Three-channel level regulators can be used as the main elements of system with automatic filling and draining of the tank on hysteresis law with an additional third input.  Four-channel level regulators with three relays are universal regulators and can operate in one of four modes, four-channel level regulators with four relays can operate in one of two modes.

Level regulators

Time relays  Time relays are designed to count down time intervals and automatically on/off the the executive device on specified intervals. Allow to implement starting and stopping of equipment at certain intervals, to monitor various time processes. The company produces one-channel (RV1), two-channel (RV2), three- channel (RV3), and eight-channel (RV8) time relays. Time relays are available in cases for panel, wall and DIN-rail mount.

Time relays

Portable temperature meters  Devices are designed to measure temperature and humidity, save values ​​at specified interval of time in non-volatile memory of device with ability to transfer data to PC.

Portable temperature meters

Electric heating cathode "Buran"  REGMIK develops and manufactures electric boilers "Buran" designed for home heating, heating system equipped with water or a special liquid (recommended) as coolant. Electric Selection is based on the heat balance of the facility.  Electric boiler - an opportunity to use cleaner sources of non-polluting exhaust harmful substances as a heat source in various systems of direct, accumulated and combined heat and together with accumulation tanks. Electric boiler can be used for hot water tanks indirect heating and can also serve as a backup heat source.  The main elements are electric boiler - heat exchanger, which consists of a tank with reinforced in him the electrodes, power management and regulation. Electric boilers are supplied already Packaged: circulating pump, programmer, expansion tank, safety valve and filter.

Electric heating cathode "Buran"

Cam switches KONCAR  Cam switches load production Koncar (Croatia) are of high switching capacity, electrical and mechanical durability (with high quality insulation materials and contacts with silver alloy) and small size. Can be used as switches in the main and auxiliary elektrolantsyuhah:  Switches engines;  Switches for signaling and measurement of electrical circuits;  Multipoint switches and switches;  Group switches;  Switches returning. Switches may be turning angle 30°, 45°, 60° and 90°. Can be used at ambient temperatures from - 25 ° C to 50 ° C.

Cam switches KONCAR

Our company has earned the trust of companies operating in the fields of:  Iron and steel industry;;  Mining and mining industry;  Food and Beverages;  Production of steam boilers;  Manufacture of machine tools;  Production of non-ferrous metals;  Manufacture of metal products and others.

Main principles of our company are:  Personal approach to each client;  High quality of the products;  Our prices are affordable for EVERYONE.

Legal and postal address: 15582, Ukraine, Chernihiv region, Rivnopillya, Gagarin Street, 2B +38 (0462) (0462) (0462) (0462) (050) (093) (096) Regmik_UA regmik.npf RegMikNPF