Engineering Drawing Motorcycle Engineering (021) Interprets Engineering Drawing (DKK – 4)

Teknologi dan Rekayasa 2 Target of Lesson  Student can know standard angle blocks to draw engineering  Student can draw perspective, projection, view and cross section

Teknologi dan Rekayasa 3 Recognizes Device To Draw Engineering Drawing Paper Drawing Paper Size

Teknologi dan Rekayasa 4 Pencil & Pen Pencil Rapido Pencil Recognizes Device To Draw Engineering

Teknologi dan Rekayasa 5 Jangka Recognizes Device To Draw Engineering

Teknologi dan Rekayasa 6 Ruler Recognizes Device To Draw Engineering

Teknologi dan Rekayasa 7 Screen painting Ruler Recognizes Device To Draw Engineering

Teknologi dan Rekayasa 8 Arc Ruler Recognizes Device To Draw Engineering

Teknologi dan Rekayasa 9 Standardization of Engineering Drawing Standardization of Letter and Numeral  Explains.  Same.  Technical Letter and drawing number always becomes way to show the engineering drawing purposes and objectives clearly its..  Technical Letter and drawing number also becomes decoration for drawing the engineering. On that account position of drawing and also letter and number need to be arranged in such a manner so that easy to read.  the Letter and number can be erect or oblique

Teknologi dan Rekayasa 10 Standardization of Engineering Drawing Standardization of Drawing Line  Drawing Line: To make ridge from form of a substance in drawing  Mirage Line: In the form of dash line with thickness of line 1/2 ordinary line weightses. Applied to make ridge something substance that is is not seen direct by ocular.  Liver Line: In the form of line “ stripe, point, stripe, point “ with thickness of line 1/2 ordinary lines. Applied to show axis a substance drawn.  Scale Line: In the form of trim lines with thickness of 1 / 2 from ordinary line weights.  Secant: This line in the form of line “ strip,titik,titik,strip” with thickness of 1/2 ordinary line weightses.

Teknologi dan Rekayasa 11 Line Usage Standardization of Engineering Drawing

Teknologi dan Rekayasa 12 Line Usage Standardization of Engineering Drawing

Teknologi dan Rekayasa 13 Standardization of Engineering Drawing Squeezing lines If when two lines or more different of its(the type squeezs, hence its the depiction must be executed as according to priority like following).  Drawing line ( Thick line joints, type A)  Line is not seen ( line incises medium, type D)  Secant ( line is having point, which dipertebal its(the noses and place of direction transformations, type F)  Axis lines ( line is having point, type E)  Line assists, measure line and hachures line ( trim lines joints, type B).

Teknologi dan Rekayasa 14 Level of diminution At usage of format DIN, level of diminution to the next DIN format with photocopy is 70,7%, for example from DIN A3 becomes DIN A4. Level of enlargement For enlargement from format DIN to format DIN which is the next larger ones, applied level of enlargement 141,4%, for example from DIN A4 becomes DIN A3. this Diminution and also enlargement arranged automatically at copier. Standardization of Engineering Drawing

Teknologi dan Rekayasa 15 Line width Eligible line width, so that at diminution or enlargement, normal line width wanted able to emerge. Wide in set of mm. Standardization of Engineering Drawing

Teknologi dan Rekayasa 16 Standardization of Engineering Drawing Writes high Writes high also can be written, so that if minimized or enlarged able to be adapted for which we to wish. Height in set of mm.

Teknologi dan Rekayasa 17 Perspective Drawing Perspective with one points loses

Teknologi dan Rekayasa 18 Perspective Drawing Perspective with two points loses

Teknologi dan Rekayasa 19 Perspective Drawing Perspective with three points loses

Teknologi dan Rekayasa 20 Projection Drawing Piktorial Projetion

Teknologi dan Rekayasa 21 Projection Drawing Isometris Projetion

Teknologi dan Rekayasa 22 Projection Drawing Dimetris Projetion

Teknologi dan Rekayasa 23 Projection Drawing Projection of Parallel Incline

Teknologi dan Rekayasa 24 View Drawing Kind of view

Teknologi dan Rekayasa 25 View Drawing European Projection View

Teknologi dan Rekayasa 26 View Drawing American Projection View

Teknologi dan Rekayasa 27 View Drawing Projection Symbol and Dart

Teknologi dan Rekayasa 28 Cross Section Drawing The cross section drawing or function slicing to explain parts of invisible substance drawing

Teknologi dan Rekayasa 29 Cross Section Drawing Placement of Cross section Drawing

Teknologi dan Rekayasa 30 Cross Section Drawing Substances which may not be cut Cross Section of Solid Radius

Teknologi dan Rekayasa 31 Cross Section Drawing Substances which may not be cut Cross section of bushing

Teknologi dan Rekayasa 32 Cross Section Drawing Cross section type Full cross section Half cross section

Teknologi dan Rekayasa 33 Cross Section Drawing Cross section type Cross Section Partly Cross Section of Rotary

Teknologi dan Rekayasa 34 Cross Section Drawing Cross section type Cross Section Branchs or Jumping

Teknologi dan Rekayasa 35 Electrical Symbol

Teknologi dan Rekayasa 36 Electrical Symbol

Teknologi dan Rekayasa 37 Wiring Diagram Ignition System

Teknologi dan Rekayasa 38 Wiring Diagram Charging System

Teknologi dan Rekayasa 39