Hexagonal Pyramid cut at an angle #1

Slides:

Advertisements

Similar presentations

Graphic Communication

Advertisements

Solids in contact..

Graphic Communication

Graphic Communication

The Gordon Schools Graphic Communication Cut Hexagonal Prism

The Gordon Schools Graphic Communication Technical Department.

7 Auxiliary Views. 7 Auxiliary Views Explain the purposes of auxiliary views. Identify auxiliary views and explain their relationship to regular views.

Solid Cylinder cut at an angle Drawing Abilities Teacher © J Lewis 2004.

Cylinders.  Cylinders are shapes that have a circular cross section and a depth.  They are used in shapes of bottles and their developments are used.

Unit 5 Three-View Drawings

Aberdeen Grammar School

Hexagons & Hexagonal Prisms. Hexagons Hexagons are 6 sided shapes. Hexagons can be dimensioned in 2 different ways. 1. Across the faces. 2. Across the.

It is therefore drawn in the Front View

Pyramid Construction Pyramids Square Rectangle Hex Cone.

Drawing Abilities Teacher

3rd Angle Orthographic Projection

Problem: A vertical cone, base diameter 75 mm and axis 100 mm long,

1 MEL 110 Development of surfaces. 2 Prism – Made up of same number of rectangles as sides of the base One side: Height of the prism Other side: Side.

DEVELOPMENT OF SURFACES Part II

Graphic Communication

Section Plane Through Apex Section Plane Through Generators Section Plane Parallel to end generator. Section Plane Parallel to Axis. Triangle Ellipse Parabola.

Square Pyramid (cut). Cut Square Pyramid - Problem The given views show the Front Elevation and unfinished Plan of a cut square pyramid. Draw the following.

Design and Communication Graphics

Greenfaulds High School Orthographic Views. Orthographic Projection Orthographic projection is the name given to the type of drawing where a 3D object.

f30 G1 G A a F B E C D T F A1 A G G1 B C G A 50 G1 A1

SOLIDS To understand and remember various solids in this subject properly, those are classified & arranged in to two major groups. Group A Solids having.

Divide into meridian sections – Gore development

Graphic Communication

17/02/03Designed by Barry Forbes Graphic Communication Hexagons & Hexagonal Prisms.

The Cut Cone. The given views show the Front Elevation and part Plan of a cut cone. Draw the following views :- Complete Plan End Elevation Development.

Drawing Abilities Teacher

Graphic Communication

Draw the oblique view 20 H 40 R20  15  H1 L1.

Prisms & Cylinders Development with a cut surface 1 J. Byrne 2014.

Menu Interpenetration The drawing shows the part Plan and part Elevation of an interpenetration between two cylinders. Draw :- The completed Elevation.

Graphic st aidans high AUXILIARY PLAN.

Cut Cones. At the end of this unit you will be able to: Identify a Cone and draw orthographic views of Cones with cut surfaces. Project a cut surface.

Auxiliary Plan Two views of a coat hook are shown below. The coat hook is made from Ø40mm aluminium bar and is fixed to the wall through a Ø4mm hole.

Johnstone High School Graphic Communication Rectangular Pyramids

17/02/03Designed by Barry Forbes Graphic Communication Rectangular Pyramids.

SECTIONS OF SOLIDS Part II

Greenfaulds High School Cone Development. Development of surface (1) Mark the position where the apex of the Development will be placed

Design and technology st aidan’s high A pictorial sketch of a wall lamp is shown. The shade is in the form of a cut cone. Draw, from the given.

Menu Cones Cones – What Are They?. Menu Cones Drawing an Orthographic Cone You will be given sheets that will have the following views of a cone. These.

Lesson 7 Development of cones with a cut surface.

Menu Pyramids Cut Pyramids – What Are They?. Menu Pyramids This type of drawing is asked to be drawn as part of a cut, prism, pyramid, cylinder or cone.

Cones.  Cones are shapes that have a circular base and come to one point at the top.

Cones. Cones are shapes that have a circular base and come to one point at the top.

Orthographic Projection Drawing Abilities Teacher © J Lewis 2004.

Isometric Circle using the Ordinate Method

Hexagonal Prisms Developments.  A development is a flat template of a 3D shape that when folded up in the correct way makes the actual shape of the 3D.

Isometric Circle using the Ordinate Method

Hexagonal Pyramid cut at an angle #1

Drawing Abilities Teacher

Solid Cylinder cut at an angle

Deans Community High School

Inclined Surfaces in Orthographic Projection

Auxiliary Views & Development

Deans Community High School

Hexagonal Pyramid cut at an angle #2

10-2 & 10-3: Representations of 3-D Figures and Surface Area of Prisms

Cut Hexagonal Prism Cut Hexagonal Prism - Question

Cut Hexagonal Prisms – What Are They?

Graphic Communication

Graphic Communication

First construct the given elevation, be sure to label points A,B,C which oblique plane cuts through

Graphic Communication

Cylinders – What Are They?

Presentation transcript:

Hexagonal Pyramid cut at an angle #1 Drawing Abilities Teacher Hexagonal Pyramid cut at an angle #1 © J Lewis 2004

Orthographic projection The complete Elevation and partial Plan of a hexagonal pyramid are given below The pyramid is cut by plane AB and the upper section is removed Number the six edges on the Elevation and Plan as shown © J Lewis 2004

Drawing construction lines Draw vertical construction lines from the Elevation to the Plan. The points projected are those where the edges are cut by the plane AB. Where the construction lines cross the same numbered edges on the Plan, points for the Plan are obtained. Elevation of the pyramid before cutting © J Lewis 2004

Completing the Plan view Join the points as shown Plan view after cutting © J Lewis 2004

Starting the End Elevation Construct the outline of the End Elevation. Edge 5 is at the front and the construction lines are as shown Take care that the Elevation shows 3 sides but the End Elevation shows 2 End Elevation – 2 sides ! © J Lewis 2004

Starting the End Elevation Draw the horizontal construction lines from the plane AB to the End Elevation © J Lewis 2004

Completing the End Elevation Join the points as shown – note that where a line is cut in one view, it is cut in the same place in every other view. Elevation End Elevation © J Lewis 2004

Drawing the True Shape Draw construction lines at right angles to the cut surface – this gives the True Length for the surface Draw a Datum line parallel to AB as shown © J Lewis 2004

Drawing the True Shape Draw lines, as shown, which are the same length as 1-3 and 6-4 on the End Elevation © J Lewis 2004

Drawing the True Shape Join the points to generate the True Shape This is the view with the cut surface at right angles to the direction of viewing © J Lewis 2004

Surface Development Mark the various heights on to the right hand edge which is a True Length of side. © J Lewis 2004

Surface Development Redraw the True Length line from the last slide as shown Draw an arc of this radius Step off the 6 sides of the base as seen on the Plan around the arc © J Lewis 2004

Surface Development Swing the various heights from the True Length line on to their respective edges © J Lewis 2004

Surface Development Construct the points on the correct radius as shown © J Lewis 2004

Finished Surface Development Join the points as shown to complete the Surface Development © J Lewis 2004

Completed drawing © J Lewis 2004