ALLEN & TORX WRENCHES NUT DRIVERS

NUT DRIVERS SCREWDRIVER HANDLE WITH A SOCKET BUILT ON NOT MUCH TURNING POWER WORKS WELL FOR SMALL NUTS OR SCREWS THAT AREN’T STUCK

USING A NUT DRIVER JOB SHEET #1 STEP #13 ARMATURE & COIL ASSEMBLY AIR VAIN GOVERNOR

TURNING SCREW COUNTER CLOCKWISE TO LOOSEN. REMEMBER RIGHTY TIGHTY, LEFTY LOOSEY. LEFT RIGHT CLOCKWISE COUNTER CLOCKWISE

NUT DRIVER SIZES 1/2” 3/8” 5/16” 3/16” 7/16” 11/32” 1/4” SAE SIZES WE HAVE IN THE TOOL ROOM. ALSO COME IN METRIC SIZES WHICH WE DON’T HAVE. HANDLES ARE C O L O R COORDINATED WITH SIZES PUT BACK IN TOOL ROOM CORRECTLY!

NUT DRIVERS SOME SOCKET SETS COME WITH NUT DRIVER HANDLES THAT YOU CAN PUT DIFFERENT SOCKETS ON. COVER WITH SOCKET REPORT

NUT DRIVERS MAINTENANCE AND SAFETY DON’T HAMMER ON THE HANDLES ONLY TURN WITH HANDS, NOT PLIERS KEEP CLEAN

ALLEN WRENCHES

SOME TIMES CALLED HEX WRENCHES 6 SIDED TOOL MADE SEVERAL WAYS –T HANDLE –FOLD UP SET –BITS USUALLY USED TO TURN SET SCREWS

SET SCREWS USED TO “SET” OR HOLD OBJECTS EXAMPLE: HOLDING A PULLEY ON A CRANKSHAFT. ALLEN WRENCH INSERTED INTO SET SCREW

ALLEN WRENCH SIZES SAE COME IN FRACTIONS OF AN INCH METRIC COME IN MILLIMETERS BOTH MEASURED BY THE DISTANCE ACROSS THE HEX.

ALLEN VARIATIONS BITS OF DIFFERENT LENGTHS T HANDLES APPROXIMATELY $50 BALL ENDS FOLD UP SETS APPROXIMATELY $10

BALL END ALLEN WRENCHES USED WHEN YOU DON’T HAVE A STRAIGHT SHOT AT THE SET SCREW. –CAN COME IN AT AN ANGLE NOT AS STRONG

TORX WRENCHES

ALSO A 6 SIDED WRENCH LIKE THE ALLEN BUT SHAPED MORE LIKE A STAR. USED TO TURN SCREWS AND SMALL BOLTS WITH TORX HEADS

TORX SIZES TORX ARE SIZED BY NUMBERS THAT START WITH A “T” –T10 SMALLEST –T15 –T20 –T25 –T27 –T30 UP TO –T60

TORX SCREW HOLDING HEADLIGHT IN NOTICE BUG GUTS FOR THAT REAL EFFECT!! T 15 HEADED SCREW T 15 TORX DRIVER

TORX VARIATIONS BITS OF DIFFERENT LENGTHS REVERSE TORX THEFT DETERRENT TORX NOTICE HOLE IN THE MIDDLE. FITS SCREWS THAT HAVE A BUMP THAT FITS UP IN THE MIDDLE

ALLEN, TORX WRENCHES & NUT DRIVERS QUESTIONS?