Security Systems BU Communication SystemsDCN ST/SEU-CO 1 DCN MPCC SD MPCF Multi PC-Control functionality  Maximum four PC’s in one network can be used with all Application Software Modules running on all Control PC’s. Maximum ten PC’s in one network can be used with maximum two Application Software Modules on each Control PC active.

Security Systems BU Communication SystemsDCN ST/SEU-CO 2 DCN MPCC SD MPCF PC’s with Ethernet Link

Security Systems BU Communication SystemsDCN ST/SEU-CO 3 DCN MPCC SD MPCF PC’s with Ethernet Links Server PCClient PC-1Client PC-9 50 Ω Server PCClient PC-1Client PC-9 UTP HUB UTP Server PCClient PC-1 UTP

Security Systems BU Communication SystemsDCN ST/SEU-CO 4 DCN MPCC SD MPCF Installed Application Software Modules in a Multi PC Control system local area network Client PC Server PC S 1S 1 M 2M 2 M 2M 2 S 1S 1 Off 1 M 4M 4 M 1M 1 M 1M 1 M 4M 4 Off 2 M 5M 5 S 4S 4 M 3M 3 M 2M 2 S 2S 2 M 2M 2 S 4S 4 M 5M 5 S 4S 4 M 3M 3 M 2M 2 S 3S 3 M 1M 1 M 1M 1

Security Systems BU Communication SystemsDCN ST/SEU-CO 5 DCN MPCC SD MPCF Installed Application Software Modules in a Multi PC Control system Master applications are only available if installed M 1=Master with full functionality on all PC’s where this application is installed. M 2=Master with full functionality on one PC only. M 3=Master with full functionality for Parliamentary or Multi -Voting on one PC only. M 4=Master with full functionality on one PC only and no slaves possible. M 5=Master with full functionality on Server PC only and no slaves possible. Slave applications are only available if installed and if the Master application is running S 1=Slave with limit functionality. S 2=Slave for monitoring only. Extra Printout and file saving. S 3=Slave for monitoring only.Extra Printout facility. S 4=Slave for monitoring only. Off 1=No slave function possible. Off 2=No slave function possible.This application can only set as Master on the Server PC.

Security Systems BU Communication SystemsDCN ST/SEU-CO 6 DCN MPCC SD MPCF DBPATH in a Multi PC Control system Server PCClient PC local area network DBDPATH=\\SERVER\C-DCN\DCN\DBS\ MPCPath=\\SERVER\C-DCN\DCN\ SYSPATH=C:\DCN\ MPCPath=C:\DCN\ DBDPATH=C:\DCN\DBS\ GUI LocalDBDPath=C:\DCN\DBS\ SYSPATH=C:\DCN\ GUI

Security Systems BU Communication SystemsDCN ST/SEU-CO 7 DCN MPCC SD MPCF DBPATH in a Multi PC Control system Server PCClient PC local area network DBDPATH=\\SERVER\C-DCN\DCN\DBS\ MPCPath=\\SERVER\C-DCN\DCN\ SYSPATH=C:\DCN\ MPCPath=C:\DCN\ DBDPATH=C:\DCN\DBS\ LocalDBDPath=C:\DCN\DBS\ SYSPATH=C:\DCN\ Data

Security Systems BU Communication SystemsDCN ST/SEU-CO 8 DCN MPCC SD MPCF Multi PC-Control functionality End of section  Robert Bosch GmbH All rights are reserved. Reproduction or passing on to third parties in whole or in parts is prohibited without the written consent of the copyright owner.