1.How can we input data satellite and receiver satellite setting? 2.Using multifeed for the data satellite how we figure out dish connection ? 3.How we use favorite channel menu? Important Note : When you use data satellite while receiver under EMU ON functions,you must push to zero key four times on the remote control and close EMU ON and turn on EMU OFF. If you open EMU OFF function,then receiver will work faster. TWIN RECEIVER PROGRESS OF INSTALLATION !!! WARNING : Please read this user guide manual before the using receiver. Diseqc switch Receiver tuner input Eurobird 33 degree or Eutelsat w degree Data tuner input Turksat Hotbird Astra Hellas Twin tuner input How we must do data satellite and receiver satellite setting?

Data Tuner Input Receiver discrambled the coded channels while connecting data input tuner. Data communication is made by two satellite. a) Eurobird satellite or, b) Eutelsat w6 satellite You must select of dish antenna from which satellite get data. Then you enter KEY code at first line on the BISS menu. a) Reference for Eurobird satellite You can use below frequency for setting your dish. “11110mhz, Horizental, 3124 symbol rate ”. 33 degree Eurobird satellite are between Turksat and Astra Satellite. After you set up to Eurobird satellite dish, you connect “Data Tuner Input”. For using key code is below to Eurobird satellite. 1A 19 AC B 09 1B 1A BA 8E E For Eurobird satellite, frequency must be on first line of BISS Key. b)Reference for Eutelsat W degree satellite. You can use below frequency for setting your dish. “11325mhz, Vertical, symbol rate”. Key code for Eutelsat w6 A7 A7 70 BA C6 CC CB A7 B0 A9 A A7 28 E6 ATTENTION : To edit the key values please push the RED button on the RCU end enter the keys for the satellite which you want to use for data download. For Eutelsat w6 satellite, frequen must be on first of BISS key.

When you use multifeed for Turksat and Eurobird or Hotbird and W6 satellite,you can set up only 1 dish as picture. To get data from Eurobird satellite,you must focus your dish to Eurobird. After than using multifeed, you can set up Turksat satellite. Also you can follow same procedure for Eutelsat W6 data satellite. Eurobird LNB Turksat LNB Using multifeed for Data Tuner Input without additional dish How we can use favorite channel menu ? You can see the Channels, which you want to watch on the satellite receiver on the Favorite Channel List as a group. When you press FAV key on remote control,then FAV menu will open in the screen as picture. When you choose the group which you want on the menu, then you can see those channel list.Then you can select channel by OK button. You can watch that channel..