1 Light OP 504 ex – Project Presentation Luca Invernizzi Design

2 OP 504 ex - 2D Side View Diameter Max = 71 mm Actual Size Length = 250 mm

3 Various Views REAR VIEW FRONT VIEWTOP VIEW SIDE VIEW

4 Internal Light Features NEW inside: Aluminum Housing, with Heat Sink. INTERCHANGEABLE BATTERY MODULE Simply unscrew the Recharge Bushings Recharge Bushing

5 Rear Part Command & Functions Pulse Power Set Magnetic Button Pulse OFF Magnetic Button Ultra Bright White LED Multicolor Information LED Security Slide Security Slide: Switch ON – OFF all light functions Ultra Bright White LED: High Efficiency White LED – 10k mcd Pulse Power Set Magnetic Button: 1 Push = 100% Power – 2 Push = 50% - 3 Push = UB LED 3 sec holding = SOS signal Pulse OFF Magnetic Button: Switch OFF all activate function Multicolor Information LED: - Battery capacity indicator (average) - Charging Status - Alarm Indication

6 Features Tomorrow's lights today. OceanPro lights have found their way into thousands of dive bags over the past two decades, and still have a reputation as one of the brightest, toughest, and most dependable lights around. The new OceanPro 504 EX is an upgrade from the famous OceanPro 502 EX. Advantages of the OceanPro 504 EX over the OP 502 EX. - New design (see the picture). - Two easy magnetic push button to manage all functions. - Ultra Bright White LED with 10k mcd (micro candle) – Low consumption but high efficiency for extra hours security light. - New inside light with aluminum housing and heat sink (see the picture). - Interchangeable battery module that is removed by simply unscrewing the recharge bushings (see the picture). - Special software to optimize the discharge of the Ni-MH battery pack. - Universal input battery charging system that is both small and light weight. Charger information: The new power supply has universal input power (90-260VAC, 50-60Hz). Charging management system is inside the light and the charging status information is shown by the LED in the rear part of the light. Color charging status: Red = fast charge Flashing Red + Green = trickle charge NOTE: The LED in the power supply is green when plugged into an outlet.

7

8

9 Discharge Graphics Profile – Note 1 OP 504 ex OP 502 ex

10 Anodize Color Options Below different combination of possible Housing Anodize color. NOTE: The Natural Gray + Black colors is the inexpensive option Natural Gray + BlackBlack + Black

11 Anodize Color Options Blue + BlackTitanium Blue + Black

12 Anodize Color Options Red + Black