Naval Architecture Bureau Veritas Training Course Questionnaire For the benefit of business and people

2 Naval Architecture Questionnaire 1 –What are the main concerns of Naval Architecture?  Ship safety  Ship design  Ship performance  Ship geometry  All of above  Some of above  Naval Architecture

3 Questionnaire 2 – What are the ship types to be considered in terms of navigational areas?  Inland navigation  Sea-going  Non-moving  All of above  None of above  Naval Architecture

4 Questionnaire 3 –What is the definition of Deadweight?  displacement less lightship displacement  mass of water displaced by moulded lines at designed load waterline  displacement of equipped ship ready to go to see but excludes cargo, passengers, crew and consumables  None of above  Naval Architecture

5 Questionnaire 4 – Advantages of the mild steel are:  Relative low cost of production  Good mechanical properties  Easy fabrication  All of above  None of above  Naval Architecture

6 Questionnaire 5 – Disadvantages of high tensile steel are:  Higher working stresses  Save weight  Increased susceptibility to fatigue cracking and buckling  Thinner plates reduces corrosion tolerance  All of above  None of above  Naval Architecture

7 Questionnaire 6 – A welding process must satisfy: Naval Architecture  Remove superficial contamination from the joint faces  Avoid atmospheric contamination  Supply energy to create union  Control of weld metallurgy  All of above  None of above 

8 Naval Architecture Questionnaire 7 – What are the 3 groups considered for reason of structural defects:  Material wastage, deformations and factures  Material strength, water resistance and weather exposure  Weather exposure, deformations and material specific weight  Material wastage, material specific weight and material strength  All of above  Naval Architecture

9 Questionnaire 8 – Type of corrosion are: Naval Architecture  Grooving corrosion  Stress corrosion  Pitting  Erosion  All of above 

10 Naval Architecture Questionnaire 9 – What affirmative is correct? Naval Architecture  The inclination in transverse direction is the trim  The inclination in the longitudinal direction is the list  The inclination in the longitudinal direction is the heel  The inclination in the longitudinal direction is the trim  None of above 

11 Naval Architecture Questionnaire 10 – Items that must be found in a trim and stability booklet are: Naval Architecture  Position of draught marks and standard loading conditions  Hydrostatic curves and cross curves  General description of the ship and tank sounding tables  Intact stability results and lightship data  Instructions on the use of the booklet and general arrangement  All of above 