FoamPro Features & Benefits

139 FoamPro Systems 1600 Series 2000 Series 3012 Model AccuMax Series

140 Operates without flow restriction Commences operation immediately Displays flow rate * Displays total water usage * Displays total concentrate * Displays low foam conditions Warning indicators Re-supply foam without interruption Indicates when exceeding foam injection rate * Incremental proportioning Quickly accesses Class A or Class B foam* and default settings Interfaces with CAFS Remote start/stop & Auto- On* FoamPro Features * Not available on 1600 series

141 FoamPro Benefits Unsurpassed features –Design incorporates recommendations from fire fighters worldwide Superior performance –Combining innovative FoamPro patented microprocessor and controls with rugged Hypro and Edwards pumps Unmatched accuracy –Most accurate proportioner on the market –Widest range of performance and options –Improved accuracy translates to: –Reduction in foam concentrate cost –Improved logistics operation for foam re-supply

142 FoamPro Benefits (cont.) Ease of use –Easiest proportioner in the industry to use –Push of the button and system is activated –Automatically monitors water flow and injects the precise amount of foam concentrate Information available to operator –Flow in GPM –Total amount of foam solution or water flow –Foam injection percentage –Total foam concentrate pumped –Indicates when exceeding foam injection rate

143 FoamPro Benefits (cont.) Service testing –Test without injecting foam concentrate into water –Cost and environmental benefit –Pump concentrate to foam tank or outboard for measuring System reliability –All FoamPro designs are SAE tested for: –Low temperature storage and operation –High temperature storage and operation –Thermal shock from low to high temperature –Humidity, corrosion, chemical and steam cleaning test –Shock and vibration test for accelerated life of 5 years/ 50,000 miles

144 FoamPro Benefits (cont.) Foam system installation –Easily installed in new or existing apparatus –Technical and engineering assistance direct from FoamPro Experience –Average fire industry experience of FoamPro personnel is over 20 years! Built for present, designed for the future –Today’s 3% foam concentrates are being replaced by 1%, and today’s 1% will soon be replaced by 0.5% –Precise injection of foam concentrates from 0.1% to 10% –Accurate proportioning of all foam concentrates, even today’s high viscosity foams

145 Commences operation with the push of the RED button… Or throw of a switch Operation

146 Option offers programmable “Auto-Start” System fully armed upon power-up Advanced Feature Controller

147 Digital Display Information Water flow in (gpm) Total foam concentrate injected Total Gallons of water flowed Foam concentrate injection percentage

148 “Lo.Con” display –Selected foam concentrate tank is getting low –If foam concentrate isn’t added within 2 minutes, “no.Con” is displayed “no.Con” display –Foam concentrate pump turns off –Add foam concentrate Low Foam Display Information

149 “HI.FLO” display –Occurs when the water flow exceeds the foam pump capabilities of meeting chosen concentrate injection percentage Exceeding Foam Injection Rate

150 Dual Foam Concentrate Tank (CMS)

151 Controller includes: –Operating instructions –On/Off switch –Injection rate control –Adjustable from 0.1%-1.0% –System Status Light Display Information (1600 Series)