Journal bearing, Ball bearing

Slides:

Advertisements

Similar presentations

6 STATICS ENGINEERS MECHANICS CHAPTER Lecture Notes:

Advertisements

Thrust bearings  Support the axial thrust of both horizontal as well as vertical shafts  Functions are to prevent the shaft from drifting in the axial.

8.6 Frictional Forces on Collar Bearings, Pivot Bearings and Disks

ROLLER BEARINGS. Bearings are used to support rotating shafts and are classified according to the direction of the main load: Axial bearings are designed.

Mechanical Engineering Dept.

A test rig for evaluation of thrust foil bearings and/or face seals

On the Advanced Efficiency Analysis for Half Toroidal CVT -The Efficiency Analysis Considering Deformation of CVT Components - Masayuki Ochiai Kinji Yukawa.

Analysis of Various Parameters Associated with Oil Lubricated Journal Bearings By: Paul Wolfinger.

Design of Shaft A shaft is a rotating member usually of circular cross-section (solid or hollow), which transmits power and rotational motion. Machine.

Summary Description Selection characteristics Advantages/Disadvantages

Lectures 7 and 8 Machine elements D.Sc Harri Eskelinen

Lubrication Of Plain Bearings. Plain Bearings are the oldest Types of Bearings Roman building crane with pulley block and human power drive. (500 B.C.)

MAGSEAL 101. Rotary face seal that utilizes magnetic attraction force to positively mate the optically flat seal faces. Magnetic attraction force variation.

Products made from rolling

Outline Hydrodynamic/Journal/Sleeve Bearings Rolling-Element Bearings

Rolling Contact Bearing

/www2.chicago-rawhide.com Chapter 14 Bearings.

Chapter Outline Shigley’s Mechanical Engineering Design.

Lecture 6 – Bearings and Bushings

CHAPTER 14 Wheel Bearings and Service

In the analysis of a tilting pad thrust bearing, the following dimensions were measured: h1 = 10 mm, h2 = 5mm, L = 10 cm, B = 24 cm The shaft rotates.

How to support a shaft? The motor just turns the shaft. It doesn’t provide any support.

FINITE ELEMENT MODELING OF THE EFFECT OF WEAR ON THE LOAD-CARRYING CAPACITY AND MAXIMUM OIL PRESSURE OF A PLAIN JOURNAL BEARING Marc Desjardins and Ernesto.

Bearings, Lubricants and Couplings

New Mexico FFA Agricultural Mechanics Career Development Event Engine Power.

Timken Learn and Lead Customer Training 5/17/2007Radial Ball Product Overview1 Radial Ball Bearing Product Overview Part B Narrated by David Beach Motion.

Practise questions Answers later.

DESIGN OF MACHINE ELEMENTS

AIR BEARING SYSTEM.

Chapter 9 Bearings Topics Introduction to bearings Types of bearings

416 書名： Essentials of Mechanical Engineering Design, 1/E 作者： Shigey Mischke Budynas 書號： MX0398.

Radial Ball Bearing Product Overview

Engineering Mechanics: Statics

PRINSIP TRIBOLOGI DRY SLIDING FLUID-FILM LUBRICATION -Hydrodynamic Lubrication - Squeeze Film Lubrication - Pressurized Lubrication ELASTODYDRODYNAMICS.

14-6 LOAD/LIFE RELATIONSHIP

Rolling-Contact Bearings

1 Teaching Innovation - Entrepreneurial - Global The Centre for Technology enabled Teaching & Learning, N Y S S, India DTEL DTEL (Department for Technology.

1 Teaching Innovation - Entrepreneurial - Global The Centre for Technology enabled Teaching & Learning, N Y S S, India DTEL DTEL (Department for Technology.

Bearing Use in Design. Bearing Terminology BearingRacewayRolling ElementsCage Lubricant Seal=

World-Class Manufacturer & Solution Provider in Custom and Commodity Bearings.

Design of Bearings. Introduction A bearing is a machine element which support another moving machine element (known as journal). It permits a relative.

Lesson 6 Rolling Contact Bearings. The concern of a machine designer with ball and roller bearings is fivefold as follows: (a) life in relation to load;

Bearings Types Plain Rolling Element Ball Roller Jewel Precision

Chapter 11 Rolling-Contact Bearings Lecture Slides The McGraw-Hill Companies © 2012.

BEARINGS Suported by. Introduction Different types of bearing are used extensively throughout our machines to join stationary part to a moving part. Suported.

AKHILESH KUMAR PRODUCTION ENGINEERING . 14UPE054

Design of Slider Bearing

Qs. 1 on VI The coefficient of dynamic viscosity values for a high grade oil and a low grade oil at 40 oC are 15 cp and 60 cp respectively. It is required.

The thrust bearing outer runner rubbing with bearing housing

D-Lab 2: Spindle March 17th 2008.

Shafts – Definition Generally shafts are members which rotate in order to transmit power or motion. They are usually circular in cross section, and that’s.

Applications of Friction in Machines

Shafts Shafts: A rotating Member.

Comparing Rolling to Journal

UNIT - V DESIGN OF BEARINGS.

Date of download: 10/29/2017 Copyright © ASME. All rights reserved.

Analysis Of A Full Journal Bearing and the Effect of Wear on Performance By: Marc Desjardins.

Bearings Rolling Contact Bearings – load is transferred through rolling elements such as balls, straight and tapered cylinders and spherical rollers. Journal.

Rolling Contact Bearings

ME 251 Anupam Saxena Professor Mechanical Engineering

By: Aldo Lopez-Negrete

The Fundamentals of Bearings

UFMF Design and Electromechanical systems

Design and Electromechanical systems

Prof. H. D. Mhatre BELT DRIVE Prof. H. D. Mhatre Prof. H. D. Mhatre.

Chapter 13 Rolling-contact Bearings

Journal bearing, Ball bearing

Bearing Use in Design.

DR. IMADUDDIN HELMI WAN NORDIN

Presentation transcript:

Journal bearing, Ball bearing Experiment 7 Journal bearing, Ball bearing

Journal bearing and Ball bearing

Lubrication oil Lb-sec/in2

Journal bearing

Revolutions per second Petroff equation viscosity Radius of bearing Friction force Revolutions per second Length of the bearing Radial clearance

Average pressure in the bearing Hydrodynamic theory of lubrication Sommerfeld number Average pressure in the bearing

Example 1 A shaft runs at 1800 rpm in a 2x2 in2 bearing at a stable temperature of 150oF. The oil used is SAE 20, the load is 2000 lb, and Cr =0.001in. Find friction force and hp. Sol. From Fig. 8.11(b), fr/Cr=3.6 from Fig.8.11(a) h0/Cr=0.44. therefore, h0=0.00044in.

Ball and roller contact bearing

Static and dynamic load

Note: The reliability for C10 is 0. 9 Note: The reliability for C10 is 0.9. a=3 for ball bearing, 10/3 for roller contact bearing

Combined Radial and thrust Loading

Example 2 A single roll deep groove ball bearing( d=20mm, D=42mm, B=12mm.) running at 700 rpm, the load is 10 kN and in radial direction. Find the life of the bearing. Sol. From the catalog the bearing has a dynamic rate load of 9.4kN.

Mounting and enclosure

Experiment 7-1 Determine the power need to overcome the friction of the journal bearing for a optical disk spindle motor. The internal diameter of the bearing is 0.1 in, length is 0.2 in. and the clearance is 0.0002in. The lubrication oil is light turbine oil. The rotating speed is 8000rpm. If the operating temperature is 140oF, find the power needed to overcome the friction of the bearing.

Experiment 2 If the break of a motorcycle has a bearing which loaded by a dynamic force. The style of the bearing is TPI d=12mm,D=32mm. The required life of the break is 10000 hr, find the maximum design load of the bearing. Please Draw a cross section (with dimensions) of the assembly of the bearing (including the mounting arrangement).