NeSSI™ Connectivity Discussion Pico (M8 Ø8)Euro (M12) Style Snap-on SpeedLock Screw-on Wire size & pinsReceptacles PCB Leaded Right Straight Daisy Chain Junction

Pico (M8 Ø8) 2-wire + drain wire 24AWG, foil shield 4A 125VAC/VDC (Pin rating) (other pin and wire configurations possible but not relevant to FF) Style Ø8 - Snap-on (minimal applications at less than 0°C) Snaplock material POM (nylon) Overmold body – PUR M8 - Screw-on Collars – Nickel platted brass, or 316SS Overmold body – PUR (M8 Ø8) Available in Right or Straight body Note: a new pin convention and wire standard would be required by FF

Female Picofast® fieldwireable connector Male Picofast® PCB right angle connector Male Picofast® straight leaded end connector

Daisy Chain Picofast ®

Junction Picofast ® drops Eurofast ® trunk

Eurofast® M12 (Pin convention already established by FF) 2-wire + drain wire 18AWG, foil shield 2-wire + drain wire + local ground wire 18AWG, foil shield 2-wire + drain wire 24AWG, foil shield 2-wire + drain wire + local ground wire 24AWG, foil shield Style M12 – Speedlock® (Being release now, no experience at low temperatures – will be backward compatible) M12 - Screw-on Collars – Nickel platted brass, or 316SS Overmold body – PUR Note: a new wire standard would be required by FF for 24AWG

Female Eurofast® fieldwireable connector Male Eurofast® PCB right angle connectorMale Eurofast® straight leaded end connector

Daisy Chain Eurofast ® 2-wire + drain wire 24AWG, foil shield 2-wire + drain wire + local ground wire 24AWG, foil shield VBR Splitter Body

2-wire + drain wire 18AWG, foil shield 2-wire + drain wire + local ground wire 18AWG, foil shield or 2-wire + drain wire 24AWG, foil shield 2-wire + drain wire + local ground wire 24AWG, foil shield VB2 Splitter Body

Junction Eurofast ® drops Eurofast ® trunk

Sampling of M8 & M12 receptacles and cordset