Overvoltage damage caused by Electrical Surge CAN BE ELIMINATED.

Slides:



Advertisements
Similar presentations
Solar PV On-Site Guide Solar PV On-Site Installers Guide.
Advertisements

A guide to Real Power Protection
The Electrical GuruTM Paul W. Abernathy,CME
2014 NEC Code Changes Ted “Smitty” Smith E Light Electric.
1 SOLAR SYSTEMS BASICS.  National Electric Code (NFPA # 70) for Photovoltaic Systems  Mechanical Code of New York State for Thermal Systems  Plumbing.
Tap Conductor Rules.
Computer Maintenance Power Quality and Protection Copyright © Texas Education Agency, All rights reserved. 1.
Circuits. 1.Identify a parallel circuit. 2.Determine the voltage across each parallel branch. 3.Determine the current across each parallel branch. 4.Apply.
EET Survey of Electronics
Proposed Design and the Operation of a Disconnecting Device for Small EG Installations Prepared by Hendri Geldenhuys.
© 2011 Ericson Manufacturing, Willoughby, Ohio
AGENDA INTRODUCTION CELLS AND COMPONENTS PV PERFORMANCE PV APPLICATIONS CODES AND STANDARDS EMERGENCY RESPONSE.
PowerPoint ® Presentation Chapter 12 Utility Interconnection Distributed Generation Generators Inverters Interconnection Codes and Standards Interconnection.
How do I protect my home? Tutorial SA3 With surgeassure™ Whole Home Surge Protection.
Freedom Combi Inverter
Coal Mine Connections Lessons from Experience. Why are we talking about Coal mine connections Because we had a situation where the customer wanted a service.
PC Care Tips. Computers need air circulation to keep them cool. As they continue to get faster, they use more voltage and therefore run hotter. Don't.
As a group What is electricity made of?
Protection Against Transient Overvoltages
Vidhyadeep Institute Of Management & Technology, Anita, Kim Electronics & Communication Department Guided by Mr. Vicky Paperwala.
Power Quality Understanding Effective Solutions Presented by YOUR NAME HERE.
1 Power Quality Mary Santori, P.E. Senior Engineer September 12, 2013.
Using a DVOM.
PSerc Lightning Protection: A Stroke of Luck? Theory and Application: Customer Side Low Voltage Systems Ward Jewell Wichita State University APPA 2005.
What makes substation work?
Electric Circuits Part Two: Current and Voltage Learning Goals  Explain how current flows in an electric circuit.  Define voltage and describe how.
Module- optimizer ECOD. Feigin Electric solution-Module Optimizer “ECOD” New product which allows you to optimize the voltage within the norms laid down.
Circuit Master Circuit Master™ uses three PROVEN technologies* – Capacitor (reduces DEMAND) – Harmonic Filter (harmful frequencies) – Surge Protection.
Electrical Materials Continued. Powering your home Homes in Ontario now have Smart Meters, these meters keep track of how much you use and when. The idea.
Assumption University Thailand EE4503 Electrical Systems Design Main Circuit 1.
NGfL CYMRU GCaD ELECTRICAL WORKS DISCLAIMER Neither WJEC or NGfL accepts any responsibility whatsoever for any injury, however caused,
Lesson 6 Voltage Do we need to MEASURE it? OR Do we need to DETECT it?
UNIT FIVE: Electricity and Magnetism
MNM Fatal Electrical Accident Electrical Accident October 10, 2010 (Oklahoma) October 10, 2010 (Oklahoma) Granite Operation Granite Operation Contract.
ELECTRIC CHARGES AND CURRENT. WHAT IS THE DIFFERENCE? Static Electricity and Electrical Current is made of the same thing, electrons. However, in static.
What is POWERGRID??? The Power Grid Corporation of India Limited (POWERGRID), is an Indian state-owned electric utilities company headquartered in Gurgaon,
SAFETY FIRST LAST & ALWAYS Core Safety Values. Mechanical Lifting/Suspended Loads I will never place myself or others under a suspended load.
A PRESENTATION OF PRACTICAL TRAINING ON “400KV GSS “ \
SERVICE ENTRANCE EQUIPMENT
ELECTRICAL SAFETY FOR INSTRUMENTS SECTION. Electrical measurement safety Understanding hidden hazards and new safety standards.
C-12 ELECTRICAL CW3 RIESE 18 APRIL DC SYSTEM -24V, 34 AMP HOUR NICKEL CAD BATTERY A 30V DC STARTER/GENERATORS -AN EXTERNAL DC POWER SYSTEM.
Shore Power System General Location. Shore Power Power comes on to the vessel in the form of 480 Volt, Three Phase, 60 Hz Alternating Current (A/C) electricity.
What makes substation work?
MCB Connor, Sunny, Kia. What does it do? A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from.
Mitsubishi I-MiEV Isolation Procedure.
Cleaner power, building and equipment protection and a minimum kilowatt reduction of 10% (savings). No out of pocket cost option, trial period, easy installation.
STUDY OF ELEMENTS OF A 220/132/33KV SUBSTATION
Electrical Safety.
Sub Station.
Radio Base Stations Sited on Power Line Towers
IP-based 8-port Switched Power Manager
POWER FACTOR CORRECTION
© 2004 Refrigeration Training Services - Refrigeration Categories v1.1
Mastering Autodesk Revit MEP 2016 CHAPTER 14: Circuiting and Panels
Circuits Electrical Wiring.
THREE-PHASE GROUND-FAULT BASICS
ELECTRICAL INSTALLATION AND MAINTENANCE (EIM) 5 INSTALL ELECTRICAL PROTECTIVE DEVICES FOR DISTRIBUTION, POWER, LIGHTING, AUXILIARY, LIGHTNING PROTECTION.
Smart battery management
Chapter Six Ground-Fault Circuit Interrupters, Arc-Fault Circuit Interrupters, Surge Protective Devices, Immersion Detection Circuit Interrupters, and.
Lightning Induced Surge
AGENDA INTRODUCTION CELLS AND COMPONENTS PV PERFORMANCE
Calculations: Transformers and Service Conductor Calculations
AGENDA INTRODUCTION CELLS AND COMPONENTS PV PERFORMANCE
MAIDA DEVELOPMENT COMPANY Recommended Products for the Lighting Industry (757)
Electrical components and systems
2019 ECR Presentation “HOT SKIN”
Presentation transcript:

Overvoltage damage caused by Electrical Surge CAN BE ELIMINATED

The Silent Slave overvoltage elimination system (SURGE) is inexpensive, easy to install and has 30 year proven track record with over 30,000 systems installed world wide. This system can be installed as a complete facility protection or it can be designed to protect the more surge prone areas. Expanding the system is as easy as adding more units. Every unit added increases the level of protection. A small investment in a Silent Slave System now will eliminate the unpredictable reinvestment of replacing damaged equipment in the future.

 Silent Slave will save you money and down time by keeping your equipment safe from lightning induced surge damage.  Silent Slave is installed at each electrical panel.  The distributed installation will take care of overvoltage conditions regardless of where they enter.  The faster they are suppressed the less the time to cause damage.

 Silent Slave is designed as a modular device.  The level of protection can be increased by adding units. Every electrical panel within a facility can be protected by adding units. The over all facility protection is increased with each unit.

 The values applied to protective ampacity and joules at each main or sub panel are accumulative to facility protection.  They all work in the isolated area as well as simultaneous operation during catastrophic events.

 Determine Location of Units.  Determine Types of Units.  Determine Number of units  Compare to System Requirements Chart.

 Locate all Main and Sub Electrical Panels, Disconnects and Contactors.  List the VOLTAGE and AMPS of each. NOTE: If intentions are to first protect problem areas, list the panels that feed these areas. The protection of total facility can build in stages. The more units installed the greater the overall level of protection.

DETERMINE ELECTRICAL PARAMETERS MODEL CHART  Meter AC or DC voltage between circuit conductors.  i.e. line/line, line/neutral, line/ground, neutral/ground  NOTE: An electrical network operating at 380ac would require the 4803 model. Use a 4803 on the high or wild phase of a 24oVac delta.

 The installation must be performed by a licensed electrician.  Time to install will vary by location of each unit. In an electrical panel, main or sub it takes approximately 30 minutes per unit. This allows for opening the panel and getting ready to install. NOTE: Always meter the power before installing to double check you have the correct units.

 For complete instruction of installing the Silent Slave go to technical support and down load the manual.  Always install units with cap pointing up or down. Never install unit where it can be used as a step or handle. Always point away from traffic.