Release 01/10/051 ASSEMBLY INSTRUCTIONS DUCOSUN F MULTIFIT

Release 01/10/ Part list Multifit base 40 (100711) Connection set Aerofoil 200 F (101191) Connection set Aerofoil 350 F (101521) Multifit fork 60/40 (100721) Connection set Aerofoil 250 F (101861) Connection set Aerofoil 400 F (101211) Multifit fork 80/40 (100731) Connection set Aerofoil 300 F (101201)

Release 01/10/053 Part list Multifit base 80 (100781) Multifit fork 80/80 (100801) Multifit fork 60/80 (100791) Multifit fork 80/120 (100821) Multifit base 120 (100811) check nut M5 DIN 985 (100347)

Release 01/10/054 Part list Open bearing MCM MM washer M8 (100346) L50/75/5 (702901) hexagon head bolt M8x10 DIN933 (100337) rectangle thin nut M8 (101196) hexagon head bolt M8x20 DIN933 (101198)

Release 01/10/055 Part list hexagon head bolt M8x70 DIN 933 (101209) check nut M8 DIN 985 (100312) Hexagon socket button head cap screw with flange M8x12 ISO 7380MF (101216) countersunk allanheadscrew M5x20 RVS A2 T-bolt M8x20 (733101) washer M5 DIN125 RVS A2 (100339)

Release 01/10/056 Part list Countersunkhead thread forming screw M6x30 (102007) self-drilling countersunk screw Ø4,8x25 (101199) countersunk screw M5x55 DIN 7991 (100348)

Release 01/10/057 ONDERDELENLIJST Coverplate 200F type I (101251) Coverplate 350F type I (101671) Coverplate 250F type I (101791) Coverplate 400F type I (101311) Coverplate 300F type I (101281)

Release 01/10/058 ONDERDELENLIJST Aerofoil 200F+ (101101) Aerofoil 350F+ (101491) Aerofoil 250F+ (101801) Aerofoil 400F+ (101131) Aerofoil 300F+ (101111)

Release 01/10/ HORIZONTAL ASSEMBLY Assembly of lower connection piece L 50/75/5 with hexagon head bolt M8x70, washer M8 and check check nut M8. Assembly of other connection piece L 50/75/5 with T- hexagon head bolt M8x25, washer M8 and check check nut M8.

Release 01/10/0510 The rectangle thin check nut M8 fixed to multifit base with hexagon head bolt M8x20 and washer M8.

Release 01/10/0511 Slide the multifit base in the rafter and hitch the hexagon head bolt M8x20. Divide them over the mentioned distance.

Release 01/10/0512 The multifit fork 60 or multifit fork 80 is slided over the multifit base.

Release 01/10/0513 0° 15° 30° 45° 60° 75°

Release 01/10/0514 Standard assembly : Fit Multifit with two Hexagon socket buttton head cap screws with flange M8x12 ISO 7380MF.

Release 01/10/0515 Alternative assembly : Fit Multifit with two hexagon head bolts M8x10 DIN933 and two washers M8 DIN 125-1A.

Release 01/10/ F 250F 300F 350F 400 F Assembly side plates 200F Type I, 250F Type I, 300F Type I, 350F and 400F Type I with countersunk head thread forming screw M6x30. Attention: use grease and an electric drill of min. 15V.

Release 01/10/0517 Assembly of the Aerofoil with specifically provided tool in the multifit.

Release 01/10/0518 Assembly of the Aerofoil in multifit with 2 self-drilling countersunk screws Ø4,8x25. Attention for Aerofoil 200F: begin at the bottom.

Release 01/10/0519 HORIZONTAL Assembly

Release 01/10/0520 Assembly of the Aerofoil in multifit with 4 self-drilling countersunk screws Ø4,8x25. Attention for Aerofoil 250F, 300F: begin at the bottom (at the back) to fit the Aerofoils. First step: Assembly of base and fork in the right position.

Release 01/10/0521 Assembly of the Aerofoil in multifit with 4 self-drilling countersunk screws Ø4,8x25. Attention for Aerofoil 250F, 300F: begin at the bottom (at the back) to fit the Aerofoils.

Release 01/10/0522 Assembly of the Aerofoil in multifit with 4 self-drilling countersunk screws Ø4,8x25. Attention for Aerofoil 250F, 300F: begin at the bottom (at the back) to fit the Aerofoils.

Release 01/10/0523 Assembly of the Aerofoil in multifit with 4 self-drilling countersunk screws Ø4,8x25. Attention for Aerofoil 250F, 300F: begin at the bottom (at the back) to fit the Aerofoils.

Release 01/10/0524 Assembly of the Aerofoil in multifit with 4 self-drilling countersunk screws Ø4,8x25. Attention for Aerofoil 250F, 300F: begin at the bottom (at the back) to fit the Aerofoils.

Release 01/10/ DUCOSUN F horizontal assembly of wider Multifit fork Wider Multifit Forks were made to allow larger spans (see below list).

Release 01/10/0526 For Multifit base 120 mm: drill Ø8,5 mm CC= 80 mm. For Multifit base 80 mm: drill Ø8,5 mm CC= 40 mm Preparation of the bearing structure: saw, drill, weld.

Release 01/10/0527 Preparation of the bearing structure: saw, drill, weld.

Release 01/10/0528 Preparation of the bearing structure: Putting the structure in place.

Release 01/10/0529 Place Multifit base: Fix with hexagon head bolts M8.

Release 01/10/0530 Assembly of fork on Multifit base.

Release 01/10/0531 Assembly of fork on Multifit base. 0° 15° 30° 45° 60° 75°

Release 01/10/0532 Fitting of Multifit fork with Hexagon socket button head cap screw with flange M8x12 ISO 7380MF.

Release 01/10/0533 Assembly of Aerofoil in Multifit fork with tool: drill Ø5,5 mm. drill Ø 5,5 mm

Release 01/10/0534 Fit Aerofoil in fork with screws M5 x 55 + washer M5 and check check nut M5.

Release 01/10/0535 Assembly from bottom to top.

Release 01/10/ Ducosun F Multifit: Coupling of Aerofoils Assembly fixed spigot Assembly shaft fixed spigot Ø14 L=100 in adjustable bearing Ø29/75 (Connection set Aerofoil) with countersunk allanheadscrew M5x20 and washer M5. Attention: fix countersunk allanheadscrew with loctite.

Release 01/10/ Coupling of Aerofoil 200F Fix the fix-tap in Aerofoil 1 and close the Aerofoil with side plate type II and countersunk head thread forming screw. Fix Aerofoil 2 in a adjustable bearing Ø29/75 (Connection set Aerofoil) and close with the side plate type II and countersunk head thread forming screw.

Release 01/10/0538 Assembly of Aerofoil 200F ATTENTION: with assembly: provide tolerance to avoid distension.

Release 01/10/ Coupling Aerofoil 250F, 300F, 350F and 400F Assembly shaft fixed spigot on couple side plate (Connection set Aerofoil) with hexagon head bolt M5x20 and washer M5. Fit the fix-tap in Aerofoil 1 with couple side plate and countersunk head thread forming screw. Fix bearing in Aerofoil 2 with couple side plate and countersunk head thread forming screw. Assembly of bearing MCM mm.

Release 01/10/0540 Coupling of Aerofoils 250F, 300F, 350F and 400F ATTENTION: with assembly: provide tolerance to avoid distension.

Release 01/10/ VERTICAL Assembly Assembly of rafters to the wall. Assembly of Multifit base to the rafters.

Release 01/10/0542 Assembly Hexagon socket button head cap screw with flange M8x12 ISO 7380MF with washer M8 DIN 125-1A, 2 courses in base.

Release 01/10/0543 Assembly fork over the base in the required position.

Release 01/10/0544 Assembly with Hexagon socket button head cap screw with flange M8. Now tighten both lower and upper screw (or hexagon head bolt).

Release 01/10/0545 Assembly of the Aerofoils.

Release 01/10/0546 Assembly of the Aerofoils.

Release 01/10/0547 Assembly DUCOSUN F MULTIFIT Coupling with a Multifit

Release 01/10/ F 250F 300F 350F 400 F Assembly side plates 200F Type I, 250F Type I, 300F Type I, 350F and 400F Type I with countersunk head thread forming screw M6x30. Attention: use grease and an electric drill of min. 15V.

Release 01/10/0549 For Multifit base 120mm: Drillings Ø8.5mm CC= 80mm. Preparation of the bearing structure: saw, drill, weld.

Release 01/10/0550 Preparation of the bearing structure: saw, drill, weld.

Release 01/10/0551 Preparation of the bearing structure: Putting the structure in place.

Release 01/10/0552 Place Multifit base 120: Fix with hexagon head bolts M8.

Release 01/10/0553 Assembly fork 60/40 (Lamel 200F,250F) or fork 80/40 (Lamel 300F,350F en 400F) on Multifit Base 120

Release 01/10/0554 Assembly fork on base of Multifit 0° 15° 30° 45° 60° 75°

Release 01/10/0555 Assembly fork on base of Multifit

Release 01/10/0556 Assembly aerofoil in fork Multifit with tool: Drilling Ø5.5mm Drilling Ø 5.5mm

Release 01/10/0557 Secure aerofoil in fork with screws M5x55 (100348) + washer M5 (100339),check nut M5(100347)

Release 01/10/0558 Secure aerofoil in fork with screws M5x55 (100348) + washer M5 (100339),check nut M5(100347) play according table on following page

Release 01/10/0559 Play for absorbing temperature dilatation.

Release 01/10/0560 Assembly from bottom to top

Release 01/10/0561 DUCOSUN F