K200S Introduction

K200S Overview - Module Type LG Master-K Key features Dedicated CPU offers ▶ Higher processing speed(0.5 ㎲/step) ▶ More reliable system ▶ More cost-effective solution Easy to use Windows based programming S/W ▶ Portability & Compatibility of Software ▶ Mnemonic & LD and SFC supported Variety of CPU just fit to your applications - Maximum I/O : 384 points ▶ CPUA : Computer Link(RS-232C) ▶ CPUB : Computer Link(RS-485), PID and RTC(Real Time Clock) included ▶ CPUC : Computer Link(RS-232C), PID and HSC(High Speed Counter), RTC (Real Time Clock) included Built-in Power supply for Analog control ▶ Output :5Vdc 2A, +15Vdc 0.5A, -15Vdc 0.2A Powerful Standard & High speed network ▶ RS232C, RS422/485 include MODBUS(RTU, ASCII), AB DF1(Ful Duplex), Fieldbus(F-net), F-net Single Remote I/O

K200S CPU LG Master-K Built-in Flash Memory Built-in RS232C Link Built-in 7K Program Back-up without battery Not necessary additional memory pack such as CQM1(OMRON) - CQM: 4/8K EEPROM/EPROM Memory Cassette necessary Provides additional RS232C Ch. besides Loader Ch. within one serial port Monitoring & Controlling are available using LG protocol Provides 3 types of Link speeds TXD RXD KGL-WIN Handy-Loader Host Computer Loader Port (on CPU Module) 1 5 6 9 Dip switch for uploading program Flash Memory

K200S CPUs - Built-in functions LG Master-K B Type (GM6-CPUB) C Type (GM6-CPUC)  RS422/485 – Station : 0~31(32 stations) – Speed : 9,600/19,200/38,400 bps – Multi-drop Network with High Speed  High Speed Counter – 1 phase Up/Down or 2 phases Up/Down – Counting Range : 0~16,777,215 (24bit) – Counting Speed : Max. 20Kbps – Multiplication : 1 / 2 / 4 – Condition Up/Down for 1 phase ; Program or External Input  PID with auto-tuning function – Simple PID Control using software – Not necessary PID/Temp. Controller → Cost-down effect – Loop No. ; Unlimited  RS232C Interface  RTC(Real Time Clock) - Y2K Free - Record of Power Faliure etc. Available Function 1:N N : N PLC Computer . . . . . . K200S K200S K200S ... K200S K200S K200S HOST Slave Slave  RTC(Real Time Clock) – Y2K Free – Record of Power Failure & etc. Available  PID with Auto-tuning function * A Type (GM6-CPUA) : RS-232C Interface

K200S Power & I/O Modules LG Master-K Power Supply I/O Modules  Input Range : 85 ~ 264V, DC12~24V  Safe against Severe Voltage Fluctuation  3 types of Power Supply AC Power Supply – General Type (PAFA) Output 5V/24V (for DC Input) – Analog Type (PAFB) Output 5V/±15V (for Analog) Input current : 0.5A / 110V, 0.25A / 220V DC Power Supply – Input DC12~24V(PDFA) Input current : 1.5A / DC12V, 0.7A / DC24V  If you use the A/D, D/A Module for application, you should select analog type I/O Details points Description connector 8 Sink/Source TB D/C 16  TB Input 32  CN 8 AC110V TB A/C 8 AC220V TB Relay 8 Relay, 2A TB 16 Relay, 2A TB 16 Sink, 0.5A TB Output 16 Source, 0.5A TB Transistor 32 Sink, 0.1A CN 32 Source, 0.1A CN Triac 8 1A TB

* B/I : Built-in function K200S Special Modules LG Master-K Fnet with High speed A/D 4CH  Analog Applications  PID Control with auto-tuning Fnet Remote I/O D/A 4CH  Master  Slave I/O - DC24V, 16pts. - Relay, 16pts. - 8 DC In., 8 Ry Out. PID (B/I) TC Input 4 CH K200S HSC:50kpps RS232C  MODBUS(Slave) (ASCII, RTU)  AB DF1(Full Duplex) HSC(B/I) 20kpps  Position Probe  Servo/Step Motor Control Control RS422 Position Module - 2 Phases RS232C(B/I)  Serial Interface  1:1(N), N:N  SCADA I/O RS422/485(B/I) * B/I : Built-in function

K200S Open Network LG Master-K IEC/ ISA Frame Editing Tool  Serial Interface(Cnet) Frame Editing Tool  RS232C, RS422/485 - Frame Editor Tool enables to communicate with any other PLCs using user defined protocol ▷ MODBUS mode Cnet module can be used as a Master or Slave station interface to connect K200S PLC to the MODBUS network using MODBUS RTU or ASCII protocol ▷ AB DF1 (Full Duplex) Protocol - Mountable up to 4 modules in one base board - Modem connection is available for long distance IEC/ ISA  Fieldbus Interface(Fnet) & Single Remote I/Os ▶ Fnet, LG dedicated Fieldbus network, supports long distance communication - Up to 5.25km (using 6 repeaters), generally 750m ▶ Dedicated Gate Array enables High speed communication and Reliability - Transmission speed : 1M bps ▶ Mountable up to 2 modules in one base board ▶ Single remote I/Os - Not necessary CPU and Power modules - Link Master Class + Remote Slave Class = 64 nodes - 16 DC Input, 16Relay Output, 8DC Input/8Relay Output

K200S Programming Tool (KGLWin) LG Master-K K200S Programming Tool (KGLWin) No need to make a complex network program(Frame Editing Tool to match other protocols) Simple Frame Editor Tool enables to replace old complex programs for the communication protocol. - User Friendly Ladder Diagram and Mnemonic Language Supported - Window-Based Tool( Windows 95, 98 and NT) - Applicable to all LG Master-K series - Remote programming via network is available - System configration by Project Structure - Several windows can be displayed in a screen - Various Self-Diagnosis and abundant PLC information in On-Line mode - Display comments in a program available all printers supported by Windows Overview On-Line Editing - Possible to edit programs in Run mode - Forced I/O On/Off and change the value of data Powerful Debuggings - Excution step by step - Excution to a given step - Excution till the data becomes a given value - Excution the cycles at the No. of given times

K200S Dimensions LG Master-K CPU Module I/O Module Size comparison 38 35 90 110 GM6-CPUA PAU/REM STOP GM6-CPUA 38 35 90 110 Size comparison A1S (132%) CQM1 (115%) GM6 (100%) Base board A B C D E A B C D E GM6 - B04M 230.5 244 92.0 110 62 B06M 300.5 314 B08M 370.5 384 GM6-B12M 510.5 524