SACHE Faculty Workshop - September Inherently Safer Design Dennis C. Hendershot Rohm and Haas Company Engineering Division Croydon, PA 2003 SACHE Faculty Workshop Baton Rouge, LA September, 2003

SACHE Faculty Workshop - September Inherently Safer Design and Green Engineering A common philosophy –Eliminate hazards from the manufacturing process rather than controlling hazards –Hazards to: People Environment Property Business

SACHE Faculty Workshop - September New paradigm for the environment Traditional environmental approach –“End of pipe” waste treatment –“Waste minimization” – an advance, but we can go further Green chemistry and engineering –Eliminate or dramatically reduce hazards to the environment

SACHE Faculty Workshop - September Many of us learned this as children Dr. Suess – The Cat in the Hat Comes Back The message: Once you get something dirty, the only way to get it clean is to make something else dirty. The best way to keep the world clean is to not get it dirty to begin with.

SACHE Faculty Workshop - September New paradigm for safety Traditional safety approach –“Add on” safety features Prevent - alarms, safety interlocks, procedures, training Mitigate – sprinkler systems, water curtains, emergency response systems and procedures Inherently safer design –Eliminate or significantly reduce process hazards

SACHE Faculty Workshop - September Safety and the environment Safety – focus on immediate impacts of single events –Impact on people –Impact on property and business – “Loss Prevention” These single events do cause both short and long term environmental damage as well

SACHE Faculty Workshop - September Why are we interested in inherently safer design?

SACHE Faculty Workshop - September Flixborough, England (1974)

SACHE Faculty Workshop - September Pasadena, TX (1989)

SACHE Faculty Workshop - September Relationship of green chemistry, engineering, and inherently safer design Green chemistry and engineering – broad consideration of many human and environmental impacts –reaction paths, synthesis routes, raw materials and intermediates –implementation of selected synthesis routes –Requires fundamental knowledge of physical and chemical processes Inherently safer design – focus on “safety” incidents –Immediate consequences of single events (fires, explosions, immediate effects of toxic material release) –Includes consideration of chemistry as well as engineering issues such as siting, transportation, and detailed equipment design

SACHE Faculty Workshop - September Inherently safer design, green chemistry, and green engineering Green Chemistry and Engineering Inherently Safer Design

SACHE Faculty Workshop - September History of inherently safer design Technologists have always tried to eliminate hazards –Robert Stevenson – simplified controls for early steam locomotives (1820s) –James Howden – in-situ manufacture of nitroglycerine for the Central Pacific Railroad (1867) –Alfred Nobel – dynamite (1867) –Thomas Midgely – CFC Refrigerants – (1930) Replacement for flammable (light hydrocarbons, ammonia) and toxic (ammonia, sulfur dioxide) refrigerants then in use

SACHE Faculty Workshop - September Inherently safer design in the chemical industry Trevor Kletz, ICI, UK (1977) –Jubilee Lecture to the UK Society of the Chemical Industry –Reaction to Flixborough, England explosion –Named the concept –Developed a set of specific design principles for the chemical industry –Later published - original paper referring to “Inherently Safer Design” Kletz, T. A. “What You Don't Have, Can't Leak.” Chemistry and Industry, , 6 May 1978.

SACHE Faculty Workshop - September What is inherently safer design? Inherent - “existing in something as a permanent and inseparable element...” –safety “built in”, not “added on” Eliminate or minimize hazards rather than control hazards More a philosophy and way of thinking than a specific set of tools and methods –Applicable at all levels of design and operation from conceptual design to plant operations “Safer,” not “Safe”

SACHE Faculty Workshop - September Hazard An inherent physical or chemical characteristic that has the potential for causing harm to people, the environment, or property (CCPS, 1992). Hazards are intrinsic to a material, or its conditions of use. Examples –Phosgene - toxic by inhalation –Acetone - flammable –High pressure steam - potential energy due to pressure, high temperature

SACHE Faculty Workshop - September To eliminate hazards: Eliminate the material Change the material Change the conditions of use

SACHE Faculty Workshop - September Chemical Process Safety Strategies

SACHE Faculty Workshop - September Inherent Eliminate or reduce the hazard by changing the process or materials which are non-hazardous or less hazardous Integral to the product, process, or plant - cannot be easily defeated or changed without fundamentally altering the process or plant design EXAMPLE –Substituting water for a flammable solvent (latex paints compared to oil base paints)

SACHE Faculty Workshop - September Passive Minimize hazard using process or equipment design features which reduce frequency or consequence without the active functioning of any device EXAMPLE –Containment dike around a hazardous material storage tank

SACHE Faculty Workshop - September Active Controls, safety interlocks, automatic shut down systems Multiple active elements –Sensor - detect hazardous condition –Logic device - decide what to do –Control element - implement action Prevent incidents, or mitigate the consequences of incidents EXAMPLE –High level alarm in a tank shuts automatic feed valve

SACHE Faculty Workshop - September Procedural Standard operating procedures, safety rules and standard procedures, emergency response procedures, training EXAMPLE –Confined space entry procedures

SACHE Faculty Workshop - September Batch Chemical Reactor Example Hazard of concern – runaway reaction causing high temperature and pressure and potential reactor rupture

SACHE Faculty Workshop - September Inherent Develop chemistry which is not exothermic, or mildly exothermic –Maximum adiabatic exotherm temperature < boiling point of all ingredients and onset temperature of any decomposition or other reactions

SACHE Faculty Workshop - September Passive Maximum adiabatic pressure for reaction determined to be 150 psig Run reaction in a 250 psig design reactor Hazard (pressure) still exists, but passively contained by the pressure vessel

SACHE Faculty Workshop - September Active Maximum adiabatic pressure for 100% reaction is 150 psig, reactor design pressure is 50 psig Gradually add limiting reactant with temperature control to limit potential energy from reaction Use high temperature and pressure interlocks to stop feed and apply emergency cooling Provide emergency relief system

SACHE Faculty Workshop - September Procedural Maximum adiabatic pressure for 100% reaction is 150 psig, reactor design pressure is 50 psig Gradually add limiting reactant with temperature control to limit potential energy from reaction Train operator to observe temperature, stop feeds and apply cooling if temperature exceeds critical operating limit

SACHE Faculty Workshop - September Which strategy should we use? Generally, in order of robustness and reliability: –Inherent –Passive –Active –Procedural But - there is a place and need for ALL of these strategies in a complete safety program

SACHE Faculty Workshop - September Inherently Safer Design Strategies

SACHE Faculty Workshop - September Inherently Safer Design Strategies Minimize Moderate Substitute Simplify

SACHE Faculty Workshop - September Minimize Use small quantities of hazardous substances or energy –Storage –Intermediate storage –Piping –Process equipment “Process Intensification”

SACHE Faculty Workshop - September Benefits Reduced consequence of incident (explosion, fire, toxic material release) Improved effectiveness and feasibility of other protective systems – for example: –Secondary containment –Reactor dump or quench systems

SACHE Faculty Workshop - September Opportunities for process intensification in reactors Understand what controls chemical reaction to design equipment to optimize the reaction –Heat removal –Mass transfer Mixing Between phases/across surfaces –Chemical equilibrium –Molecular processes

SACHE Faculty Workshop - September Semi-batch nitration process

SACHE Faculty Workshop - September What controls the rate of this reaction? Mixing – bringing reactants into contact with each other Mass transfer – from aqueous phase (nitric acid) to organic phase (organic substrate) Heat removal

SACHE Faculty Workshop - September CSTR Nitration Process

SACHE Faculty Workshop - September Can you do this reaction in a pipe reactor?

SACHE Faculty Workshop - September How much progress have we made since this 16 th Century gold plant? From A. I. Stankiewicz and J. A. Moulijn, “Process Intensification: Transforming Chemical Engineering,” Chemical Engineering Progress 96 (1) (2000)

SACHE Faculty Workshop - September “Semi-Batch” solution polymerization

SACHE Faculty Workshop - September What controls this reaction Contacting of monomer reactants and polymerization initiators Heat removal –Temperature control important for molecular weight control

SACHE Faculty Workshop - September Tubular Reactor

SACHE Faculty Workshop - September Reducing the size of an emulsion reactor

SACHE Faculty Workshop - September Loop Reactor - Emulsion Polymerization Cooling Tank “Reactor” Volume ~ 50 liters (~13 gallons)

SACHE Faculty Workshop - September Good engineering makes existing chemistry “Greener” Chlorination reaction – traditional stirred tank reactor Mixing and mass transfer limited –Chlorine gas  liquid reaction mixture  solid reactant particle  rapid reaction Loop reactor – similar design to polymerization reactor in previous slide –Reduce: Chlorine usage from 50% excess to stoichiometric Reactor size by 2/3 Cycle time by ¾ Sodium hydroxide scrubber solution usage by 80%

SACHE Faculty Workshop - September We can do better! From E. H. Stitt, “Alternative multiphase reactors for fine chemicals: A world beyond stirred tanks,” Chemical Engineering Journal 90 (2002) Why so many batch stirred tank reactors?

SACHE Faculty Workshop - September Scale up

SACHE Faculty Workshop - September Scale out

SACHE Faculty Workshop - September On-demand phosgene generation Reported by Ciba-Geigy/Novartis Crop Protection in 1996/1998 Continuous process to produce phosgene Phosgene consumers are batch processes No phosgene storage Engineering challenges –Rapid startup and shutdown –Quality control –Instrumentation and dynamic process control –Disposal of “tail gas” and inerts

SACHE Faculty Workshop - September Substitute Substitute a less hazardous reaction chemistry Replace a hazardous material with a less hazardous alternative

SACHE Faculty Workshop - September Substitute materials Water based coatings and paints in place of solvent based alternatives –Reduce fire hazard –Less toxic –Less odor –More environmentally friendly –Reduce hazards for end user and also for the manufacturer

SACHE Faculty Workshop - September Substitution - Refrigeration Many years ago (pre-1930) –Toxic, flammable refrigerants Ammonia, light hydrocarbons, sulfur dioxide Quantity – often several kilograms Inherently safer alternative (1930s) –CFCs Discovery of environmental problems (1980s) –“Green” alternatives include light hydrocarbons –Require re-design of home refrigerators to minimize quantity of flammable hydrocarbon (currently as little as 120 grams of hydrocarbon refrigerant)

SACHE Faculty Workshop - September Reaction Chemistry - Acrylic Esters Acetylene - flammable, reactive Carbon monoxide - toxic, flammable Nickel carbonyl - toxic, environmental hazard (heavy metals), carcinogenic Anhydrous HCl - toxic, corrosive Product - a monomer with reactivity (polymerization) hazards Reppe Process

SACHE Faculty Workshop - September Alternate chemistry Inherently safe? No, but inherently safer. Hazards are primarily flammability, corrosivity from sulfuric acid catalyst for the esterification step, small amounts of acrolein as a transient intermediate in the oxidation step, reactivity hazard for the monomer product. Propylene Oxidation Process

SACHE Faculty Workshop - September By-products and side reactions Organic intermediate production –Intended reaction - hydrolysis Organic raw material + sodium hydroxide ---> product + sodium salt Reaction done in ethylene dichloride solvent

SACHE Faculty Workshop - September Hazardous side reaction Sodium hydroxide + ethylene dichloride solvent: The product of this reaction is vinyl chloride (health hazard) A different solvent (perchloroethylene) was used

SACHE Faculty Workshop - September The next step – “Green” but inherently safer? Replace perchloroethylene with a biodegradable hydrocarbon Reactants and products are highly soluble in chlorinated hydrocarbon solvents Chlorinated hydrocarbon solvents are relatively inert in all reaction steps New engineering problems with “green” solvent –Reduced solubility (solids handling, coating of heat transfer surfaces, fouling and plugging, mixing and fluidity problems) –Solvent can react exothermically with reactants in some process steps –These hazards can be managed, but the engineering is not INHERENT

SACHE Faculty Workshop - September Moderate Dilution Refrigeration Less severe processing conditions Physical characteristics Containment –Better described as “passive” rather than “inherent”

SACHE Faculty Workshop - September Dilution Aqueous ammonia instead of anhydrous Aqueous HCl in place of anhydrous HCl Sulfuric acid in place of oleum Wet benzoyl peroxide in place of dry Dynamite instead of nitroglycerine

SACHE Faculty Workshop - September Effect of dilution

SACHE Faculty Workshop - September Impact of refrigeration

SACHE Faculty Workshop - September Less severe processing conditions Ammonia manufacture –1930s - pressures up to 600 bar –1950s - typically bar –1980s - plants operating at pressures of bar were being built Result of understanding and improving the process Lower pressure plants are cheaper, more efficient, as well as safer

SACHE Faculty Workshop - September Simplify Eliminate unnecessary complexity to reduce risk of human error –QUESTION ALL COMPLEXITY! Is it really necessary?

SACHE Faculty Workshop - September Simplify - eliminate equipment Reactive distillation methyl acetate process (Eastman Chemical) Which is simpler?

SACHE Faculty Workshop - September Modified methyl acetate process Fewer vessels Fewer pumps Fewer flanges Fewer instruments Fewer valves Less piping......

SACHE Faculty Workshop - September But, it isn’t simpler in every way Reactive distillation column itself is more complex Multiple unit operations occur within one vessel More complex to design More difficult to control and operate

SACHE Faculty Workshop - September Single, complex batch reactor

SACHE Faculty Workshop - September A sequence of simpler batch reactors for the same process

SACHE Faculty Workshop - September Inherent safety conflicts In the previous example –Each vessel is simpler But –There are now three vessels, the overall plant is more complex in some ways –Compare to methyl acetate example Need to understand specific hazards for each situation to decide what is best

SACHE Faculty Workshop - September Conflicts and Tradeoffs

SACHE Faculty Workshop - September Some problems The properties of a technology which make it hazardous may be the same as the properties which make it useful –Airplanes travel at 600 mph –Gasoline is flammable Any replacement for gasoline must have one similar characteristic - the ability to store a large quantity of energy in a compact form –a good definition of a hazardous situation –Chlorine is toxic Control of the hazard is the critical issue in safely getting the benefits of the technology

SACHE Faculty Workshop - September Multiple hazards Everything has multiple hazards –Automobile travel velocity (energy), flammable fuel, exhaust gas toxicity, hot surfaces, pressurized cooling system, electricity –Chemical process or product acute toxicity, flammability, corrosiveness, chronic toxicity, various environmental impacts, reactivity

SACHE Faculty Workshop - September What does inherently safer mean? Inherently safer is in the context of one or more of the multiple hazards There may be conflicts –Example - CFC refrigerants low acute toxicity, not flammable potential for environmental damage, long term health impacts Are they inherently safer than alternatives such as propane (flammable) or ammonia (flammable and toxic)?

SACHE Faculty Workshop - September Inherently safer hydrocarbon based refrigerators? Can we redesign the refrigeration machine to minimize the quantity of refrigerant sufficiently that we could still regard it as inherently safer? –Home refrigerators – perhaps (<120 grams) –Industrial scale applications – probably not, need to rely on passive, active, procedural risk management strategies

SACHE Faculty Workshop - September What is the hazard of concern… …if you live on top of a hill in Philadelphia? …if you live on the ocean front at the shore? Which is inherently safer?

SACHE Faculty Workshop - September Multiple impacts Different populations may perceive the inherent safety of different technology options differently Example - chlorine handling - 1 ton cylinders vs. a 90 ton rail car –What if you are a neighbor two miles away? Most likely would consider the ton cylinder inherently safer –What if you are an operator who has to connect and disconnect cylinders 90 times instead of a rail car once? Most likely would consider the rail car inherently safer Who is right? How can you measure relative risks?

SACHE Faculty Workshop - September Inherently safer = safer Air travel –several hundred people –5 miles up –control in 3 dimensions –600 mph –thousands of gallons of fuel –passengers in a pressure vessel – Automobile travel –a few people –on the ground –control in 2 dimensions –60 mph –a few gallons of fuel –might even be a convertible – l Automobile travel is inherently safer l But, what is the safest way to travel from Washington to Los Angeles? l Why?

SACHE Faculty Workshop - September Inherently safer design – at what stage in development and design Use acrylate manufacture as an example –Basic technology Reppe process vs. propylene oxidation Other alternatives? –Implementation of selected technology Catalyst options (temperature, pressure, selectivity, impurities) –Propylene oxidation step –Esterification step

SACHE Faculty Workshop - September Inherently safer design – at what stage in development and design Acrylate manufacture example –Plant design Plant location Plant layout on site (location relative to people, property, environmentally sensitive locations) Equipment size –Storage of raw materials –One large train vs. multiple smaller trains –…..

SACHE Faculty Workshop - September Inherently safer design – at what stage in development and design Acrylate manufacture example –Detailed equipment design Inventory of hazardous material Heat transfer media (temperature, pressure, fluid) Pipe size, length, construction (flanged, welded, screwed pipe) Leak potential of equipment ….

SACHE Faculty Workshop - September Inherently safer design – at what stage in development and design Acrylate manufacture example –Operation “User friendly” operating procedures Management of change –consider inherently safer options when making modifications –Identify opportunities for improving inherent safety based on operating experience, improvements in technology and knowledge

SACHE Faculty Workshop - September At what level of design should engineers consider inherently safer design? My answer – at all levels! Inherently safer design is not a meeting, or a review session. Inherently safer design is a way of thinking, a way of approaching technology design at every level of detail – part of the daily thought process of a chemist, engineer, or other designer as he goes about his work.

SACHE Faculty Workshop - September Questions a designer should ask when he has identified a hazard In this order 1.Can I eliminate this hazard? 2.If not, can I reduce the magnitude of the hazard? 3.Do the alternatives identified in questions 1 and 2 increase the magnitude of any other hazards, or create new hazards? (If so, consider all hazards in selecting the best alternative.) 4.At this point, what technical and management systems are required to manage the hazards which inevitably will remain?

SACHE Faculty Workshop - September Better may be harder to invent “There are two ways of dealing with this problem: one is complicated and messy, and the other is simple and elegant. We don’t have much time left, so I’ll show you the complicated and messy way.” - Richard P. Feynman Nobel Prize winning physicist, discussing approaches to understanding a physics problem

SACHE Faculty Workshop - September The future of inherently safer design

SACHE Faculty Workshop - September Inherently safer design Some hazardous materials and processes can be eliminated or the hazards dramatically reduced. The useful characteristics of other materials or processes make their continued use essential to society for the foreseeable future. –Continue to manage risks –Similar to air travel – we understand the hazards, but the activity is so essential to our way of life that we will continue to fly. We will put up with, and pay for, the active and procedural design features required to maintain acceptable safety and security.

SACHE Faculty Workshop - September What is needed to promote inherently safer design? Research –Chemical engineering technology Process intensification Physical and chemical phenomena Novel energy sources Biological and biochemical synthesis Catalysis –Chemistry Green chemistry – safer synthesis routes considering raw materials, intermediates, products, reaction conditions, solvents and by-products…

SACHE Faculty Workshop - September What is needed to promote inherently safer design? Measurement –Consideration of all hazards –Different tools at different levels of design Simple, fast, high level tools for early evaluation of alternative technologies –Relative importance of conflicting hazards transparent to decision maker –Decision tools for inherently safer design and green chemistry and engineering

SACHE Faculty Workshop - September What is needed to promote inherently safer design? Education of chemists, engineers, all technologists –Inherently safer design is the way they think How many good ideas are lost because they are not pursued? The inherent safety/green benefits are not recognized. –First focus on eliminating and reducing hazards rather than managing and controlling them