PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.

Slides:



Advertisements
Similar presentations
Zebra® 105SL™ * Removing and Installing Printhead
Advertisements

PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
10-AU Calibration 3 Main Steps A) Setting the basic operating level B) Blanking the instrument C) Calibration with a known concentration standard.
DR-2000 Customer Benefits Security; Tamper resistant programming protects your customer and you! Low maintenance, long battery life & long squeeze tube.
1 Zebra 170 XiIII Plus Removing and Installing Printhead Calibrating Head Resistance Print Quality Adjustments.
Abaxis Piccolo xpress The piccolo xpress™ chemistry system is compact and easy to transport. The system consists of a portable analyzer and single-use.
Slurry Asphaltenes 1In a 500 ml Erlenmeyer weight about 8 or 9 grams of sample – record the weight. 2Add about 200 ml of n-heptane and reflux for 60 minutes.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
BROOKFIELD DIAL VISCOMETER 指針式黏度計. INTRODUCTION The Brookfield Dial Viscometer measures fluid viscosity at given shear rates. Viscosity is a measure of.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
ENTC-303PROF. ALVARADO1 Fluid Mechanics LAB: Measuring-Viscosity & Specific gravity ENTC
AccuMax Multi-Point Injection Mechanics
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
Apparatus The following items will be required for this procedure. Ensure each item is available before proceeding to the next step of this procedure:
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
Settings & Adjustments. Settings & Adjustments.
Determination of Conradson Carbon Residue (Micro Method) 1Weigh each vial to be used for sample analysis and record the mass to the nearest 0.1 mg. 2Warm.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
Percent Carbon on Platformer Catalyst by Volumetric Procedure CAUTION: Furnace tube is extremely hot! 1 Check system for leaks: a.Turn valve towards back.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
Module-6 Drilling.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
LSM780 Live Cell Turn On/Turn Off Instructions Kim Peifley 07/13/15.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter Mask.
Hot Work Permit  Meraux Refinery   Yes  N/A Meraux Refinery
Safety in the Machine Shop Session 1. Shop Tools and Techniques2.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical W Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
Time Completed Job Initials Main steps in a Confined Space Entry setup 1 Job assigned in a vessel that requires the vessel to be entered (definition of.
JFTOT Analysis 1 Preparation for test: 1. Inspect all O-Rings for degradation/cuts. 2 Assembly of Heater Tube Test Section: 1.Always use new tubes, o-rings,
All Signatures are Required PRIOR to INITIAL confined space entry. Authorized Entry Print NameSignatureDate Permit Holder Permit Issuer Shift Supervisor.
Testing Method for Corrosion on Finished Gasoline Tanks 1 Upon notification by blender that a gasoline tank has been finalized and no more adjustments.
Initialization 1Turn the power switches to both the heater controller and the viscometer on (up). 2On heater controller turn C/F toggle switch to F (degrees.
Flashpoint of Kerosene by Tag Manual Closed Cup Tester NOTE: Sample should be chilled to at least 20°F below expected flashpoint. 1Place flash tester in.
Replacing Karl Fischer Reagent and Cleaning Generator Cell for the Aquatest CMA 1Remove generator cell leaving black plug attached and dispose of the generator.
API Gravity by Stereopycnometer 1Weigh clean, empty sample cell. 2Pour heated sample into cell unil ½ - ¾ full. 3Allow sample to cool to room temperature,
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
COMPOUND MITER SAW SAFETY
Safety in Lab Environment. Safety Rules 1. Follow Instructions…Understand what you are going to do carefully before attempting to do anything. 2. Wear.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
Carbons on Catalyst CAUTION: Samples are hot when removed from the oven and furnace. Use heat resistant gloves when handling hot samples. 1Place at least.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter.
Antirust Properties of Petroleum Products by NACE Corrosion
Motorized Miter Saw.
Materials and Reagents
Benzene in Water by Purge and Trap Analysis
Octane Engine Testing Procedure
References / Documents
Presentation transcript:

PPE Use Standard (SSP-0011) Y Full Face Shield / Goggles Hood Clothing—Chemical Protection Gloves—Chemical Personal Fall Protection Respirator / Filter Mask Supplied Air Job Hazards Y es Job Hazards Y es Access and EgressMoving Parts Activities of OthersNoise Adverse WeatherRail Movement Chemical ExposureSharp Edges ElectricitySlips, Trips, and Falls FatigueStatic Electricity Fire and ExplosionTrip Injuries Ground ContaminationTrapped Pressure Manual HandlingWorking at Height Other: References / Documents  MSDS on Test Material  Unit Safe Upper & Lower Limits Spreadsheet AreaUnitOperating Procedure #Certified byRevision #DatePage 3LabOPS-LB-XX-XXX of 3 Determination of Brookfield Viscosity Environmental  All samples have to be properly labeled. All unused samples must be dumped into the Slop Tank on west side of Octane room. Special Instructions  This procedure should be followed to determine viscosity of various samples.  Any problems, notify Shift Supervisor or Duane Chaisson. Initialization 1Turn the power switches to both the heater controller and the viscometer on (up). 2On heater controller turn C/F toggle switch to F (degrees Fahrenheit). 3 On heater controller, depress setpoint display switch and set to desired temperature using the Set Point knob (for the desired temperature, refer to the Sample Table in the Operation section of this procedure). 4Check bubble level to insure that the viscometer is level. 5Turn the viscometer on. When the power is turned on, the screen displays: BROOKFIELD DV-IT; RV VISCOMETER. 6After a short time, the display will clear and the screen displays: BROOKFIELD DV-IT; VERSION After a short time, the display will clear and the screen displays: REMOVE SPINDLE; PRESS ANY KEY. 8Autozero the viscometer: remove the spindle, press any key. The screen will flash “Autozeroing”. 9After 15 seconds, the flashing stops and the screen displays: REPLACE SPINDLE; PRESS ANY KEY. 10Pressing any key brings you to the default screen. You are ready to run a Sample. Scope / Objective Note: This procedure is only valid at the time of printing. The control version can be found on the Meraux Refinery intranet. Completed Date:Prepared By:Approved By: EquipmentMaterials and Reagents

AreaUnitOperating Procedure #Certified byRevision #DatePage 3LabOPS-LB-XX-XXX of 3 Determination of Brookfield Viscosity Continued Note: This procedure is only valid at the time of printing. The control version can be found on the Meraux Refinery intranet. Completed Date:Prepared By:Approved By: Operation Note: Select appropriate spindle size for the sample to be run. The selection of the spindle is important because it determines how much sample must be poured into the sample cell. The desired fluid level is 1/8 inch on the spindle shaft. Because the “18” spindle is large relative to the others, much less sample is required (8ml). More sample is required when using the smaller spindles (31 and 34). 11Pour sample into sample cell and place in heater, making sure the bottom notch is locked into the notch at the bottom of the heater. 12Attach spindle to viscometer. 13After sample has been heated to a fluid state, slowly lower the spindle into the sample cell. 14 Lower the spindle until the tips of the alignment bracket just touch the locating ring, making contact behind the ring. Adjust the viscometer so that the tips of the alignment bracket are 1/16 to 1/8 inch above the horizontal surface behind the locating ring. 15Press SELECT SPINDLE key. The characters on the top line of the display will begin to blink. It will blink for about three seconds. 16Press either the UP or DOWN Arrow key to select the spindle size. 17When the desired spindle code is displayed, release the Arrow. 18Press the SELECT SPINDLE key again to lock in your selection. 19Press the MOTOR ON/OFF key to start the motor. 20 Select the speed. Select a speed so that the readout is on scale. The scale is from 0 to 100, and best results are obtained by adjusting the speed to yield a reading close to Press the SET SPEED key. 22Press either the UP or DOWN Arrow key to see the currently selected speed. 23To change the speed, hold either the UP or DOWN Arrow key until the speed you want is displayed.

AreaUnitOperating Procedure #Certified byRevision #DatePage 3LabOPS-LB-XX-XXX of 3 Determination of Brookfield Viscosity Continued Note: This procedure is only valid at the time of printing. The control version can be found on the Meraux Refinery intranet. Completed Date:Prepared By:Approved By: Operation 24Press the SET SPEED key to lock in your selection. 25After final speed adjustment, allow ample time (10 to 15 minutes) for the digital display on the viscometer to stabilize. 26Change heater setpoint to second desired temperature and allow time to stabilize. 27Adjust speed to yield a midpoint reading (about 50). 28Read viscosity in centipoise from screen. 29After final reading discard sample and clean sample cell and spindle with toluene.