Save time and money by purchasing a remanufactured pump. Quality and performance delivered from Ampco pumps.

Ampco PE Pumps Benefits of Reconditioning New Pump Performance Full 1 Year Factory Warranty Distributor Service 100% Interchangeability

Standard Ampco Upgrades 17-4 PH-1150 Shafts - Provides twice the tensile strength of 316 Stainless Steel Bearing Retainers - Prevents corrosion and enhances bearing protection Helical Gears - Increased load carrying capacity and reduced noise Powdercoat paint - Better protection in a caustic environment and chip resistant Sealed Cleanout Plugs - protect and extend bearing life from water penetration

STEP 1 We completely tear down the pump. All internal components; shafts, bearings, gears, spacers, seals, etc. are removed and replaced with new components.

STEP 2 We machine body and cover to standard oversized dimensions; +.020,.040,.060,.080.

STEP 3 Body and Cover are polished back to their original 32 RA finish.

STEP 4 We machine new oversized rotors to bring back tolerances to match new pump performance/efficiency.

STEP 5 Pumps are assembled to the same factory specified tolerances of a new pump. Pumps are assembled less seals/elastomers until Customer specifies option.

STEP 6 Pumps are 100% water-tested before shipment to assure flow requirements are met, as well as seal leakage. All pumps carry a 1 year warranty; same warranty as a new Ampco pump.

Q: What kind of performance can I expect with my Ampco Remanufactured pump? A: The Ampco Remanufactured Premium Economy (PE) pumps are tested to meet the performance of a new pump. The clearances are brought back to "as new" tolerances, allowing the pump to operate at maximum efficiency. Q: Does my Remanufactured pump come with a warranty? A: Yes. For a period of one year after shipment, replacement part(s) are covered under the warranty. The PE pumps offer the same warranty of a new Ampco pump. Q: What kind of price savings does a remanufactured pump bring over a new pump? A: Ampco PE remanufactured pumps cost 25% less than a comparable new pump. By reusing the body, cover and gear case, material costs are greatly reduced. Q: I see quite a few websites with used positive displacement pumps, similar to your remanufactured pump. Why should I buy an Ampco PE remanufactured pump? A: The pumps being offered through other website outlets are exactly what they claim, “used pumps”. The shops re-use the existing parts and the pumps are serviced just enough to make them functional. Ampco PE pumps are tested to ensure that standards of a new pump are met. The pump is protected with an Ampco warranty and reputation of superior quality and service. Q: Does the Ampco PE remanufactured pump look used? A: Other than the pump being white, there is no difference between a remanufactured pump and a new pump; cosmetically or functionally. The body, cover and gear case are machined and polished back to new specifications, and all other components are brand new. Q: Can I make minor changes to the stock pumps? A: We can change out the connections to what you need; shaft position, or even a special clearance rotor. Some of these changes will result in an extra charge. Please see quote worksheet to select the options you want. Q: Do any other companies offer this type of program? A: Most original manufacturers do not offer a reconditioning program. They would prefer to sell you a new pump. The Ampco “PE” program is unique because we have the pumps fully machined, assembled and ready for immediate delivery. This program was designed to offer quality, convenience and value pricing for companies with limited budgets. It will also benefit customers that need an immediate solution and can't wait for a new pump to ship. F requently A sked Q uestions