1 Introduction lecture IEM program Leo van der Wegen (on behalf of Erwin Hans, Director of TBK and IEM programs) September 2013

2 Contents IEM IEM IEM specializations IEM specializations Structure of the program Structure of the program Electives Electives Role of specialization coordinator Role of specialization coordinator Fraud is NOT tolerated Fraud is NOT tolerated Questions Questions Premaster program Premaster program Specialization specific information Specialization specific information

3 Industrial Engineering & Management (IEM) Improving processes and systems Improving processes and systems Modeling and quantitative analysis paradigm Modeling and quantitative analysis paradigm Applied in a variety of fields (manufacturing, finance, logistics, telecommunications, healthcare) Applied in a variety of fields (manufacturing, finance, logistics, telecommunications, healthcare) Multiple objectives (quality, service, risk management, productivity, or safety) Multiple objectives (quality, service, risk management, productivity, or safety)

4 IEM Multidisciplinary, with an open mind for: Multidisciplinary, with an open mind for: –Technology used in processes –Human behavior (individual and social) –Conditions in the environment of the organization (competitors, regulations, or government policies)

5 Industrial Engineers Work on real-world problems Work on real-world problems Good math and quantitative skills Good math and quantitative skills Combine knowledge from different disciplines for designing solutions Combine knowledge from different disciplines for designing solutions Project-management expertise Project-management expertise Communication skills Communication skills Creative, resourceful Creative, resourceful

6 IEM specializations Production and Logistic Management Production and Logistic Management Financial Engineering and Mgmt Financial Engineering and Mgmt (Information Technology and Mgmt) (Information Technology and Mgmt) Health Care Technology and Mgmt Health Care Technology and Mgmt In fact each student has an individual program to a certain extent. In fact each student has an individual program to a certain extent.

7 ITM specialization discontinued in In case you finished a premaster program to start the IEM-ITM specialization this year, please contact the specialization coordinator Fons Wijnhoven a.s.a.p. In case you finished a premaster program to start the IEM-ITM specialization this year, please contact the specialization coordinator Fons Wijnhoven a.s.a.p. RA 3341 RA 3341 Telephone: Telephone:

8 IEM specialization coordinators FEM: Dr. Berend Roorda FEM: Dr. Berend Roorda HCTM: Dr. Marjan Hummel HCTM: Dr. Marjan Hummel PLM: Dr. Leo van der Wegen PLM: Dr. Leo van der Wegen

9 Standard program See Course Schedule IEM : on/Programmes/master/iem/studyprog ramme/studyprogIEM.docx See Course Schedule IEM : on/Programmes/master/iem/studyprog ramme/studyprogIEM.docx You have a lot of freedom to adapt it to your personal interests! You have a lot of freedom to adapt it to your personal interests!

EC 3 mandatory common courses: 15 ec 3 mandatory common courses: 15 ec 7-8 specialization-specific courses: ec 7-8 specialization-specific courses: ec 2 equalization courses: 10 ec 2 equalization courses: 10 ec 6-5 electives: ec 6-5 electives: ec Master’s thesis: 30 ec Master’s thesis: 30 ec 4 quartiles of 15 ec = 60 ec/year 4 quartiles of 15 ec = 60 ec/year 15 ec = 420 hrs = 10 weeks 15 ec = 420 hrs = 10 weeks Each quarter has 3 courses of 5 ec Each quarter has 3 courses of 5 ec

11 Common courses (mandatory) Introduction to IEM Introduction to IEM Empirical research and data analysis Empirical research and data analysis Preparation thesis Preparation thesis

12 Equalization courses To repair deficiencies, we have two so-called “equalization courses”, early in the program To repair deficiencies, we have two so-called “equalization courses”, early in the program For students who have a Dutch BSc in IEM: these are electives For students who have a Dutch BSc in IEM: these are electives For other students: these courses are selected with you (no electives) as preparation for the specialization courses (Discuss with specialization coordinator!) For other students: these courses are selected with you (no electives) as preparation for the specialization courses (Discuss with specialization coordinator!)

13 Electives Which electives can you choose? Other IEM specialization courses and (almost) any master course offered by EWI, CTW, or TNW (there may be constrains from their side (prior knowledge) or from our side (overlap)) Which electives can you choose? Other IEM specialization courses and (almost) any master course offered by EWI, CTW, or TNW (there may be constrains from their side (prior knowledge) or from our side (overlap)) Master courses from other (inter)national technical programmes Master courses from other (inter)national technical programmes Discuss with specialization coordinator! Discuss with specialization coordinator!

14 Electives (2) “Industrial Engineering” is a much broader field at the University of Twente Applied Mathematics Applied Mathematics Business Info Technology Business Info Technology Computer Science Computer Science Mechanical Engineering Mechanical Engineering Civil Engineering & Mgmt Civil Engineering & Mgmt Industrial Design Engineering Industrial Design Engineering Biomedical Engineering Biomedical Engineering

15 Electives (3) Study abroad Erasmus programme Erasmus programme Contact Inge van Haare and specialization coordinator in an early stage Contact Inge van Haare and specialization coordinator in an early stage Approval from examination committee needed Approval from examination committee needed Examples: Linköping, Gothenburg Examples: Linköping, Gothenburg

16 Preparation Thesis Start i n first year M1.2 (Intro IEM) Portfolio: individual assignments for (research) orientation during the year: – –Approved study programme – –Research about job areas and positions for IEM graduates – –Assessment of a finished MSc thesis – –Review of a scientific paper

17 Preparation Thesis (2) I n second year: (M2.1) Portfolio Obtaining Master assignment (M2) Motivation letter for the master assignment Individual study programme and the related agreements with the specialization coordinator Overview of study grades and study progress

18 Preparation Thesis (3) I n second year: (M2.2) Finalizing portfolio Preparing Master assignment – –Literature study – –Organisation visits – –Plan of approach Grading preparation course by thesis supervisor

Preparation Thesis (4) Individual course Individual course No lectures No lectures Can be finished any quartile Can be finished any quartile You can formally start your master thesis project ONLY IF this course is finished, i.e if your plan of approach is approved by your thesis supervisor. You can formally start your master thesis project ONLY IF this course is finished, i.e if your plan of approach is approved by your thesis supervisor. 19

Preparation Thesis (5) MSc syllabus available in November via the Intro IEM Bb site MSc syllabus available in November via the Intro IEM Bb site Start M1 acitivities in Intro IEM 2013 Start M1 acitivities in Intro IEM 2013 For students starting IEM in February 2014, instructions will follow For students starting IEM in February 2014, instructions will follow 20

21 Final project Final projects are usually conducted outside the university Final projects are usually conducted outside the university Challenging: real organization, real problem, so you need to provide a real contribution Challenging: real organization, real problem, so you need to provide a real contribution Start early finding an internship for your final project (M2.1 or earlier) Start early finding an internship for your final project (M2.1 or earlier) Ask practical advice on resume, letter, contacts, etc. Ask practical advice on resume, letter, contacts, etc.

22 Final project coordinators FEM: Dr. Berend Roorda FEM: Dr. Berend Roorda (ITM: Dr. Fons Wijnhoven) (ITM: Dr. Fons Wijnhoven) HCTM: Dr. Marjan Hummel HCTM: Dr. Marjan Hummel PLM: Dr. Marco Schutten PLM: Dr. Marco Schutten

23 Individual program adjustments If you have ideas about your individual study program that go beyond the standard conditions: make a proposal! We welcome your initiatives If you have ideas about your individual study program that go beyond the standard conditions: make a proposal! We welcome your initiatives Discuss with specialization coordinator or program director Discuss with specialization coordinator or program director (You always complete 120 ec, so there are no exemptions) (You always complete 120 ec, so there are no exemptions)

24 Proactive We welcome diversity and invite ideas for taking courses We welcome diversity and invite ideas for taking courses Some courses will require more than the standard workload for some individuals (and less for others) Some courses will require more than the standard workload for some individuals (and less for others) Be proactive when it comes to planning, electives, required advance knowledge, etc. Be proactive when it comes to planning, electives, required advance knowledge, etc.

25 ROLE OF SPECIALIZATION COORDINATOR (1) Advice on and approval of Advice on and approval of –Pre-master courses –Equalization courses –Study plans –Electives Specialization coordinator sends this information to BOZ (student administration) accompanied by a study plan Specialization coordinator sends this information to BOZ (student administration) accompanied by a study plan

26 STUDY PLAN What courses are studied when? What courses are studied when? No more than 4 courses per quarter No more than 4 courses per quarter Check preliminary knowledge Check preliminary knowledge Study seriously! Study seriously! Note: There will always be some knowledge gaps, so, if necessary, search for literature and study a topic yourself! Note: There will always be some knowledge gaps, so, if necessary, search for literature and study a topic yourself!

27 ROLE OF SPECIALIZATION COORDINATOR (2) Advice on individual master programme, e.g. Advice on individual master programme, e.g. Combination of 2 specializations Combination of 2 specializations Taking courses at other universities Taking courses at other universities Study abroad for one semester Study abroad for one semester Approval via examination committee, positive advice from specialization coordinator needed Approval via examination committee, positive advice from specialization coordinator needed

28 FRAUD IS NOT TOLERATED Using unauthorized aids like mobile phones or calculators Using unauthorized aids like mobile phones or calculators Consulting someone else’s notes Consulting someone else’s notes Committing forgery Committing forgery Plagiarism = copying without crediting the source (internet, books, articles, reports from other students,…) Plagiarism = copying without crediting the source (internet, books, articles, reports from other students,…) Punishment: exclusion from exams for a whole year! Punishment: exclusion from exams for a whole year!

29 Questions, where to go? Equalization courses, electives, planning your pre-master courses: specialization coordinator Equalization courses, electives, planning your pre-master courses: specialization coordinator Other questions about planning, rules, personal circumstances: study advisor (Cornelis ten Napel) Other questions about planning, rules, personal circumstances: study advisor (Cornelis ten Napel) Other issues: program coordinator (Mrs. Bernadette Pol) or program director Other issues: program coordinator (Mrs. Bernadette Pol) or program director

30 Premaster program 30 ec bachelor courses 30 ec bachelor courses Math, Probability & statistics Math, Probability & statistics Courses specific for specialization Courses specific for specialization Maximum two exams per course Maximum two exams per course Pass within one year! Pass within one year! Start with IEM either in February 2014 or September 2014 (easier!) Start with IEM either in February 2014 or September 2014 (easier!)

31 Specialization specific information PLM PLM FEM FEM HCTM HCTM Some special “topics”: Some special “topics”: –Technology Venturing and Innovation Management (BA) –Maintenance (ME) –ITM courses offered by BIT

32 Specialization specific information Remark: There exists a strict separation of Bachelor and Master programs Remark: There exists a strict separation of Bachelor and Master programs If Corporate Finance or SMOM are equalization courses for you and you did not pass them before August 31, 2013, you have to take the following courses: If Corporate Finance or SMOM are equalization courses for you and you did not pass them before August 31, 2013, you have to take the following courses: –CF IEM MSc ( ) –SMOM MSc ( )

33 PRODUCTION AND LOGISTIC MANAGEMENT Specialization coordinator Leo van der Wegen Specialization coordinator Leo van der Wegen RA 3355 RA 3355 Telephone: Telephone:

34 PRODUCTION AND LOGISTIC MANAGEMENT Focuses on design and control of logistic processes in the entire supply chain e.g. production planning, transportation planning, network design, purchasing, reverse logistics,… Focuses on design and control of logistic processes in the entire supply chain e.g. production planning, transportation planning, network design, purchasing, reverse logistics,… Modeling, quantitative analysis Modeling, quantitative analysis Performance oriented (costs, service,…) Performance oriented (costs, service,…) Application of operations management in (i) healthcare (ii) service logistics Application of operations management in (i) healthcare (ii) service logistics

35 PROGRAM Two courses are mainly method oriented (Discrete optimization of business processes, Simulation) Two courses are mainly method oriented (Discrete optimization of business processes, Simulation) Most other courses focus on areas within logistics and on applications (Warehousing, APP, Purchasing, SCTM, RLRM, OHCP2,…) Most other courses focus on areas within logistics and on applications (Warehousing, APP, Purchasing, SCTM, RLRM, OHCP2,…) Equalization courses (10 ec) Equalization courses (10 ec) Master’s thesis (30 ec) Master’s thesis (30 ec) Electives Electives

36 PROGRAM (mandatory) Statistics and Probability Discrete Optimization of Business Processes Simulation Supply Chain - & Transport Management Advanced Production Planning Warehousing Management of Technology for PLM

37 ELECTIVES (examples) Purchasing Reverse Logistics & re-manufacturing Optimization of Healthcare Processes Reliability engineering & Maintenance management New Production Concepts

38 ELECTIVES (examples) Governing Product Development Governing Product Development Product Life Cycle Product Life Cycle Manufacturing Facility Design Manufacturing Facility Design Optimization Modelling Optimization Modelling Stochastic Models in Production and Logistics Stochastic Models in Production and Logistics Project Control & Risk management Project Control & Risk management Intelligent Transport Systems Intelligent Transport Systems SCM & ICT SCM & ICT

39 ELECTIVES The course “Design of production and inventory systems ( )” is NOT allowed as elective for students that finished Logistic Management and Production Management (e.g. BSc-IEM students). Other students, please contact the specialization coordinator! The course “Design of production and inventory systems ( )” is NOT allowed as elective for students that finished Logistic Management and Production Management (e.g. BSc-IEM students). Other students, please contact the specialization coordinator!

40 FINANCIAL ENGINEERING AND MANAGEMENT Specialization coordinator Berend Roorda Specialization coordinator Berend Roorda Telephone: Telephone: RA 3349 RA 3349

4141 FINANCIAL ENGINEERING AND MANAGEMENT How to deal with financial risk and trading these? How to deal with financial risk and trading these? Domain Domain banks... insurance... pension funds banks... insurance... pension funds Products Products shares... derivatives... structured products shares... derivatives... structured products Perspective Perspective trading... hedging... risk management trading... hedging... risk management

42 PROGRAM (mandatory) Introduction to Investment Theory Statistics and probability Mathematical Finance Special topics in Financial Engineering Risk management Structured Products Management of Technology for FEM

43 ELECTIVES (examples) Micro Economics Financial accounting Introduction to Risk Theory Management Control for Financial Institutions Simulation

44 HEALTH CARE TECHNOLOGY AND MANAGEMENT Specialization coordinator Marjan Hummel Specialization coordinator Marjan Hummel RA 5248 RA 5248 Telephone: Telephone:

45 HEALTH CARE TECHNOLOGY AND MANAGEMENT Focuses on hospitals (health organizations) Focuses on hospitals (health organizations) Improving health care processes Improving health care processes Implementation and evaluation of new biomedical technology Implementation and evaluation of new biomedical technology Market and technology development for biotech Market and technology development for biotech

46 PROGRAM (mandatory) Discrete Optimization of Business Processes Statistics and probability Simulation Optimization of Healthcare Processes Health & Health Systems Clinical Safety and Quality Assurance E-health strategies Management of Technology for Health Care

47 ELECTIVES (examples) Medical decision making Clinical efficacy & MTA Purchasing Quality and Safety in Health Care Warehousing

48 Specialization specific information Some special “topics”: Some special “topics”: –Technology Venturing and Innovation Management (BA), can be taken ONLY as a package –Maintenance (ME), courses can be chosen separately –ITM courses offered by BIT (ITM students, please contact Fons Wijnhoven a.s.a.p)

Technology Venturing and Innovation Management Management of Organisation, Operations and Technological Innovation Business Development in Network Perspective three or four of the below mentioned courses: a) Innovation & Technology Dynamics b) Principles of Entrepreneurship c) HRM, Innovation & Entrepreneurship d) Entrepreneurial Finance e) International entrepreneurship f ) Supply Chain Management & Innovation

Maintenance & service logistics Q1: Maintenance Engineering & Management (Introductory course into maint. & service logistics) Q2: Reverse Logistics & Re-Manufacturing (Covering a.o. after-sales service logistics) Q2: Failure Mechanisms & Life Prediction (Technical course: faculty engineering technology) Q3: Reliability Engineering & Maint. Management Q4: Structural Health & Condition Monitoring (Technical course: faculty engineering technology)

Maintenance & service logistics 51 It is possible to choose just one or two courses instead of five. Advice: start with MEM if you choose a package. Smaller coherent sets are, with a focus on Industrial Engineering: Maintenance Engineering & Management (Q1) Reverse Logistics & Re-Manufacturing (Q2) Reliability Engineering & Maintenance Management (Q3) Or, with a focus on Mechanical Engineering: Maintenance Engineering & Management (Q1) Failure Mechanisms & Life Prediction (Q2) Structural Health & Condition Monitoring (Q4) For more information, contact Rob Basten or Matthieu van der Heijden

5252 ITM courses within BIT Foundation of Information systems Business Process Integration Lab newInformation Markets Implementation of IT in organizations Business Case Development for IT Projects Electronic commerce ICT Management Global Project Management

53 QUESTIONS ?